How to remove iron marks on clothes: 22 ways

If ironed carelessly, iron stains and scorch marks may appear on items. Synthetics are especially prone to this problem. Stains may appear differently on fabric depending on the type and color of the material, as well as the temperature and duration of ironing. So, on white, tan marks appear in colors ranging from yellow to brown. The hotter the iron and the longer it remains on the fabric, the darker the stains will be. Viscose tends to burn and stick to hot soles. Shiny spots from the iron appear on black.

However, regardless of the reasons for the appearance of marks or their type, it is possible to remove iron stains from clothing without throwing away the item or calling in dry cleaning specialists for help.

Causes of scorch marks

The easiest way is to prevent stains from appearing. Therefore, you first need to decide what causes their appearance:

• faulty iron;
• non-compliance with the ironing regime;
• neglect of safety rules;
• inattention, for example, leaving an iron on clothes.

Modern models of irons are made with more advanced types of soles. A special coating is applied to them, which should protect things from burning. However, not a single iron can guarantee 100% safety of things if the owners do not pay attention to the labels on the clothes.

What to do first

You can try to revive the item immediately after detecting scorch marks. The sooner action is taken, the better. First of all, you need to prevent particles of burnt fabric from becoming deeply embedded in the structure of the fibers. Therefore, first they turn off the iron, take the damaged clothes and go into the bath with them. Here, turn on the water and rinse the material under running cool water. Warm water can cause stains to sink in even deeper.

Then pour liquid detergent onto the stain; you can use a stain remover. Powder mixed with a small amount of water to form a paste is also suitable. After processing, the item is rinsed again. It is possible that it can be completely washed off.

For tough stains, rinsing may not work. Then you will have to resort to more effective means.

How to remove iron marks from synthetics

Any stain is easier to remove if it is fresh. Iron marks are no exception. A few simple tips will help with this:

• a small and slight stain can be removed by ironing with a damp cloth: the item is laid out on a board, a damp cloth is placed on top and ironed. If yellow marks appear on a piece of cloth, it means the method is working;
• they begin to process the scorch from the inside out;
• Before using any product, you need to check how the fabric behaves. To do this, the selected product is applied to the material in an inconspicuous place. If after some time no stains or other damage appear on it, then you can safely use this method to get rid of the scorch itself.

How to remove iron stains depends on the type of fabric affected. Therefore, first of all, you need to find out what material the product is made of. Usually the composition of the fabric is written on labels. By the way, the ironing temperature depends on the material:

• polyamide, polyurethane, elastane – up to 75 °C;
• nylon – no more than 100°C;
• lavsan – up to 120 °C;
• polyester – up to 150 °C.

Correctly selected temperature is a 90% guarantee that unsightly iron marks will not appear on the fabric. The remaining 10% is the inattention of the owners. Some fabrics cannot be ironed, such as acrylic or chlorine. Only steam treatment is allowed for them.

Removing scorch marks and shiny iron marks from clothes at home

Unfortunately, even the most experienced and careful housewives often encounter the formation of unsightly yellow or burnt stains on various things. In most cases, this problem occurs due to improper use of a household appliance. There are many reasons: it overheats and begins to stick to clothes, either due to improper use of the household appliance, when the dirty sole of the iron begins to stain all the things with which it comes into contact, or the heated iron was left on the laundry for a long period of time. Undoubtedly, if your favorite trousers, shirt or dress does not have a through hole from a burn, but only small scorches or shine have formed, you can restore your favorite wardrobe item using improvised means. In the materials of the presented review, we will take a closer look at how to remove iron marks on clothes, hide small scorch marks and burn marks on various types of clothing.

How to remove iron stains from light-colored clothes

There are many ways to remove iron stains from light-colored fabric. Mostly chemically active and aggressive substances are used.

1. Lemon juice and powdered sugar. Lemon juice is poured onto the scorch and powdered sugar is sprinkled on top. Allow the items to dry and then wash them in cold water.
2. Another option is to wet a piece of cloth with hydrogen peroxide and rub the resulting iron stain. Then let the peroxide dry and rinse the product in running water.
3. Using baking soda. The iron stain is first washed with water, and then baking soda is poured in a thick layer. Leave it until it is completely wet and saturates the fabric. Then the stain is brushed and rinsed. The procedure will be repeated until the stain is completely removed.
4. You can use salt in a similar way: first wet the scorch mark, then sprinkle it with salt, and after a while wash the burnt item.
5. Pour milk over the stain, dry it, and then wash the item under running water or in a washing machine.
6. Cut the onion in half. Use a cut of one half to rub the burned area of ​​the cloth, and then rinse. The smell of onions may remain. To get rid of it, you can wash the item in a machine, adding fabric softener (if the fabric can withstand such washing).

What will help us

What is the reason for white and shiny areas on trousers, skirts and jackets? This happens when you iron without gauze, the iron heats up quickly, and you do not have time to react to damage to the fabric. This is especially noticeable on synthetics. How to remove iron marks to restore the appearance of the product? There are several effective methods you can use. The most common of them is cleaning things with vinegar.

Vinegar

You can revive things that have iron marks on them using vinegar. To do this, you need to take a bottle of 9% vinegar, gauze, a bowl, and a terry towel. Pour warm water into a bowl and add vinegar there. The amount of vinegar depends on the degree of damage to the fabric on the trousers. If the scorch area is small, take vinegar 1:4, if large - 50/50. That is, 100 grams of vinegar per 100 grams of warm water. Next, we take the trousers with the stain from the iron and put a terry towel in the leg, it will help us in steaming.

We soak the gauze in the resulting solution of water and vinegar. We squeeze, but do not twist. We put wet gauze on the trousers, a wet towel in the trouser leg, set the iron to medium temperature, and begin to steam. We steam carefully, without pressing the iron too hard; our task is to act as steam.

Be careful: vinegar in large quantities is very caustic, keep your face away from the iron and gauze.

Let the trousers that had an iron stain dry. If the iron mark does not disappear, repeat steaming again. This method is the most effective.

Soap and gauze

When stains on clothes are clearly visible after ironing, you can eliminate the problem with soap and gauze. The gauze must be thoroughly soaped and squeezed out so that water does not drip, and then the soaped gauze must be placed on the damaged area and ironed. This is a very gentle option.

Steam

Take cold water into any container and heat it, bring to a boil. Take the item that has some shine left on it from the iron and hang it on a hanger over hot water. After about half an hour, when the clothes are completely saturated with steam, lay the item on a convenient surface and use a brush to carefully go through the places where there was a stain from the iron.

• How to remove chewing gum from jeans quickly at home

After this, the clothes need to be ironed, but this must be done carefully, preferably through gauze. The iron mark usually disappears after the item dries.

Ammonia

Take a container of warm water and add a few tablespoons of ammonia to it. Mix thoroughly. Soak a woolen cloth in the mixture and wring it out. Use a cloth to go over the areas where the shine from the iron is most noticeable. After this, the item can be ironed, again, preferably through gauze or cotton fabric.

Salt

Make a paste of salt and water. It is better to use fine salt. The pulp is rubbed into the burned area, then allowed to dry. After the trousers have dried, take a brush and clean the problem area. On black, traces of salt are more noticeable; if possible, it is better to slightly wet the problem area under running warm water.

Hydrogen peroxide

Another way: cleaning with hydrogen peroxide and ammonia and a cotton pad. Take a bowl of warm water, add a couple of drops of 3% peroxide and a couple of drops of ammonia into it. Dip the cotton wool into the prepared liquid, squeeze it out and clean the problem area in a circular motion. At the end, press lightly with a hot iron through gauze.

How to remove iron stains from colored clothes

When choosing a method for cleaning a colored item, you need to evaluate whether it is closer to light or dark items. If the item is made of light-colored fabric, then you can use methods suitable for cleaning light-colored items: baking soda, salt, lemon juice, hydrogen peroxide, onion.

If the item is made of dark-colored fabric or has rich colors, then it is better to use cleaning products for dark fabric: vinegar, borax or alcohol.

A universal cleaning method that can be used regardless of the color of the product is physical. In this case, rub the scorch mark with a pumice stone or a nail file; you can shave the burnt spot with a regular razor. A stationery eraser can also be used. A looser elastic band will show better results. In this case, it is important not to overdo it and not rub the item into holes.

How to remove stains from dark or black synthetics

On dark things, tan marks look like shiny spots. This greatly spoils the appearance of the clothes. Shirts and trousers suffer especially badly from this type of scorching. To correct the impression, you can use any of the methods listed above.

1. Ethyl alcohol is poured onto the shiny iron stain. After an hour, the products are rinsed in running water. This method restores viscose items very well.
2. Shiny streaks can be wiped off with vinegar. To do this, moisten a cotton pad with acid and rub it over the burns. When the item dries, it is ironed again, but following the temperature recommendations.
3. Bura also fights well against shiny lasses. 1 tsp. The products are mixed in 200 ml of water. Use the prepared solution to wipe off the scorch marks. Then the material is dried. After this treatment, the product is washed as usual. The same product is perfect for colored synthetic fabrics.

How to hide severe scorch marks and burn marks?

Unfortunately, dark scorch marks and traces of severe burns can only be hidden in a studio. Therefore, in order not to burden yourself with how to remove iron stains from clothes, you should simply follow these recommendations:

• iron things through gauze cloth;
• add a little vinegar to the spray bottle compartment, since the acidic environment can prevent the formation of gloss;
• take into account all recommendations for ironing and temperature selection indicated by the clothing manufacturer on the labels;
• if the properties of the fabric allow it, then be sure to iron it using the steam setting;
• Regularly monitor the cleanliness of the soleplate of the iron, since it is carbon deposits that often contribute to the formation of shine and white spots on black things.

You will never need the methods for removing iron stains described in this material if you use the household appliance correctly and are not distracted by other matters while ironing clothes. Then things will be as in the photo or picture - always in excellent condition.

Dear visitor! If you know other methods on how to remove stains, please leave your experience in the comments.

How to remove tan marks from all types of dark fabrics

There are a number of methods that can be used to clean any fabric, not only synthetic, but also natural, for example, linen, satin. They may also have shiny marks after ironing.

1. A mixture of salt and ammonia. In 2 tbsp. Mix 15 g of salt and ammonia in spoons of water. Use the prepared product to wipe the burn on the material. Then the product is washed in warm water and ironed through moistened gauze.
2. Vinegar 9%. It is mixed with water in a 1:1 ratio. Sprinkle gauze or thin cloth with this solution and stroke the scorch mark through it. It is not recommended to press the iron.
3. 9% vinegar is diluted in a 1:1 ratio. A piece of thin cloth is moistened in the mixture, and salt is poured on top of it. Then dried in direct sunlight. The dried product is washed as usual by hand or by machine.
4. Laundry soap is grated on a coarse grater. It is dissolved in a small amount of water. Gauze is moistened in a soapy solution, and then the clothes are ironed through it without pressing the iron to the fabric. Then they let things dry. If soap stains remain, then the product is washed.
5. You can iron your trousers or skirt through a newspaper. This will also help remove shine.
6. Tea leaves will help restore the normal color and appearance of things. Only loose leaf tea is suitable for this. Tea leaves in tea bags will not work, as they do not give the same effect. Shiny laces are wiped with a damp cloth soaked in tea leaves. Then the clothes are ironed with a not very hot iron.

Removing tan marks from black natural fabric

Pants made from natural fabric are steamed. There are several thermal methods for removing shiny marks and marks from an iron:

• Take light cotton fabric. Moisten it in strong tea leaves. Iron the stain through it. Go over the fabric with a clothes brush.
• Take a piece of flannel. Soak it in acidified water and lather it well with laundry soap. Place a damp soapy cloth on the stain and steam with an iron. The item is washed in cold water without soap or powder.

Dark clothes are ironed either from the wrong side or through gauze. If this rule is violated, shiny marks appear on the skirt and trousers. They are removed with a strong soap solution. It is prepared from 72% laundry soap. Soak gauze in the liquid and wring it out.

Iron the skirt (jacket, trousers) through it. The iron is not pressed too hard. Allow the fabric to dry naturally. The item is washed if soap stains remain.