Is it possible to wash natural fur at home and how to do it

Every housewife who has bought a fur coat eventually begins to ask the question of how to wash fur at home? The fact is that over time, fur products become greasy and matted, becoming untidy, and since natural fur is very expensive. Unsuccessful cleaning and washing can completely destroy them. To prevent this from happening, you need to know exactly how to wash natural fur correctly, and also perform this procedure at least once a season.

Features of cleaning natural fur of different animals

It is easy to check the degree of contamination of the product yourself. Turn on the hair dryer and direct the air currents to the pile. If it scatters, returns to its original position, and has the same shine, the material is clean. A greasy, sticky item must be washed.

The method for removing stains from fur is selected taking into account the type of material:

Products made from mink and silver fox are washed using a dry or wet method. For minor stains, apply talc with a sponge, leave for a few minutes, and comb out the fur with a brush. A solution of equal amounts of vinegar and medical alcohol is used. The product is removed with a dry cloth.
To wash the Arctic fox, use a composition of 1 tbsp. l. ammonia, 1 liter of water. Dip a rag in the solution and touch the stains with it without rubbing. If the pile has turned yellow, it is cleaned with hydrogen peroxide.
Oat and wheat bran quickly remove dirt from fox fur. Heat the product in a frying pan, spread the clothes on a flat surface, and pour the grains on top. The method effectively cleans the item without washing. Use a brush to go over the pile well, remove any solid residue with a vacuum cleaner, and shake several times.

Methods for cleaning fur from a down jacket

Jacket collars are often decorated with natural, artificial pile. They are removable, which makes the washing process easier. It is possible to wash synthetic material with a machine in a delicate mode. You can remove stains and unpleasant odors from real fur yourself. If you have any doubts or difficulties, give the down jacket to the cleaning company's employees.

Dry wash

If the fur cannot be removed from the collar, the element is cleaned of stains and unpleasant odors using folk methods.

You can remove dirt with potatoes:

Mix vegetable starch with gasoline until a thick, homogeneous slurry is obtained. It is used instead of washing powder;
apply the composition to the fur;
leave to soak for 30-40 minutes;
Walk through the pile with a brush, removing traces of the substance.

Talc is effective in combating stains on fur products. Sprinkle the substance onto the collar. Rub it between the pile with your hand and shake the down jacket several times. You can clean a rabbit vest or cape using this method.

To remove grease and dirt, use a mixture of alcohol and salt. It will take 1 tsp. ammonia and 2 tsp. crystalline substance. Mix the ingredients, apply to the fur, and after a couple of minutes, remove the grains with a brush.

Wet cleaning

If the clothes are not very dirty, there are no visible stains, the fur needs to be refreshed - use medical alcohol for surface washing. Moisten a cotton pad with it, gently, without pressing, wipe the villi. The surface will remain damp: leave to dry. Do not use electrical appliances to speed up the process. A heater or hair dryer can deform the edge and ruin the result.

White materials tend to turn yellow. It will not be difficult to restore the original appearance of fur. It is necessary to mix an equal amount of water and hydrogen peroxide, and carefully spray the washing solution over the entire surface of the edge. Leave the product, after 10 minutes, wipe the lint with a dry cloth, comb the collar with a fine brush.

Accessories made from natural raccoon are washed using animal shampoo. The product is diluted with a small amount of water. After moistening a sponge with a soapy solution, carefully pass it over the fur, removing moisture from the villi with a dry piece of cloth.

Wash in water

You can clean natural fur from a down jacket manually. It is more convenient to work with a collar that can be detached. In order not to spoil the appearance of the product, follow the recommendations:

fresh dirt can be easily washed off using hair shampoo. Apply a little product and carefully distribute with your fingers. The fur is rinsed with running water at temperatures up to 30 degrees. A piece of clothing is wrapped in a fleecy towel and left to dry;
old stains are washed off with a mixture of 1 glass of warm water, 2 teaspoons of salt, 1 tsp. ammonia. The liquid is stirred, gently rubbed, left for 20-30 minutes, then rinsed with water;
You can wash natural fur with a soap solution, the temperature of which is up to 30 degrees. For cleaning, use liquid soap and hair care products sold in stores. Soak the collar in the prepared mixture for half an hour, and without strong pressure, treat the stained areas with your hands;
To ensure that the shape of the product remains the same after washing, the pile should not be squeezed or rubbed too much. Having removed the dirt, rinse the collar and briefly place it under cold water. This will keep the fur soft and shiny. You can dry the attribute horizontally on a towel, away from heating devices;
The faux wool collar is washed in an automatic machine on a delicate cycle with a water temperature of up to 40 degrees. Dry powder is used. The fur is dried naturally without a spin program.

Other methods

If you cannot wash the fur from a down jacket with water, use alternative folk remedies.

Rye and wheat flour will help remove dust and dirt accumulated between the pile. Roll the collar with the substance, distribute the washing product throughout the product. Knead the fur with your hands and shake. A vacuum cleaner with an attachment will help remove white grains.
River sand is an effective cleanser. It replaces store-bought detergents. Pre-heat the bulk mixture in a frying pan or baking sheet. After waiting for it to cool down, distribute it among the items. The product will absorb dirt. After 20 minutes, you can brush over the treated area of the down jacket.
Shaking and beating the product with a bamboo stick helps remove dust and fine dirt. If the stains are ingrained, the fur will have to be washed. After the procedure, additionally vacuum the item using the sofa nozzle.
The abrasive cleaning method is suitable for light-colored products. Hardwood sawdust is used and can be mixed with softwood sawdust. Dry plants can damage the pile. Saturate the elements with gasoline, spread evenly over the surface, and wash. Rub in gently, leave for a while, shake and comb the fur.

Washing the edge

If the fur on the jacket is removable, this makes it much easier to wash. Before washing the fur from the down jacket, you must, of course, unfasten it. If you need to wash permanent fur at home, you will have to be clever so as not to get the entire jacket wet. Products with permanent fur are laid out on the table to make it easier to clean the edge.

If the collar is artificial, then it can be easily machine washed. The temperature for such things should be about +30, the washing mode should be selected delicate. The products are dried in a horizontal position, and after drying they are combed. It is much more difficult to wash natural fur.

It is strictly forbidden to wash natural fur products in water, as this will inevitably lead to shrinkage of the product and even to its damage. Only dry cleaning or dry cleaning are two possible options for washing natural fur.

Soap solution

If it is not recommended to completely soak the product in water, it can be cleaned with a damp cloth or sponge soaked in a soap solution. Prepare a soap solution based on regular shampoo or baby soap. The pile is wiped with a rag in the direction of growth, being careful not to wet the skin so that it does not wrinkle.

After you clean the product with soapy water, wipe it dry with a dry towel and leave it in a horizontal position for final drying. While the edge dries, you need to shake it vigorously several times and then comb it with a special brush. When combing, do not sharply tug the villi. Comb such things only in the direction of growth of the pile.

Starch and gasoline

A great way to wash the fur from a down jacket dry is to treat it with starch and gasoline. These two products perfectly collect dust and dirt, and even remove stains.

For such purposes, you need to take special household gasoline, as it is well purified. Car gasoline will not work for cleaning the edge. Mix potato starch and gasoline to make a paste. The mixture is applied to the most contaminated areas of the collar and left for 30 minutes. Then the product is cleaned with a brush and the remaining cleaning agent is shaken off. Usually the erased edge becomes much cleaner after the first procedure.

Talc

Talc is a proven way for many housewives to wash fur at home. Take a handful of powder and begin to rub it into the pile in contaminated areas. The procedure is carried out until the talc absorbs all the dirt. Then the powder is simply shaken off, and the fur can be vacuumed.

An excellent alternative to talc if you don't have it on hand is potato starch and semolina.

Peroxide

Very often, collars, especially light ones, begin to turn yellow. Peroxide will help to cope with the yellowness that appears due to prolonged wearing. To prepare the working solution, 1 tsp. peroxides are diluted in 200 ml of warm water.

Then moisten a sponge or flannel in the solution and begin to clean the edge according to the growth of villi. Experienced housewives advise adding 5 drops of ammonia to the solution to add shine to the collar and further whiten it.

Cereals

How to clean natural lint if it is very long? Simple oatmeal, which is found in every home, will help. To do this, heat a handful of oatmeal in a dry frying pan and scatter it over the surface of the collar. The pile must be wiped well with warm flakes so that they absorb all the dirt. Finally, the fur is shaken out. You can also vacuum the collar and then hang it out in the air.

Glycerol

Glycerin is an excellent product for caring for natural fur. Glycerin perfectly collects all the dirt and at the same time gives shine to the pile. It is necessary to moisten a cotton pad in pure glycerin, and then wipe the pile with it as it grows. After this, the item is combed well and hung out to dry in the shade in the air. Be sure to listen to the advice of experienced housewives. For example, many people advise that if the pile has lost its shine, wipe it with a vinegar solution and then dry it in the shade.

You can use natural apple cider vinegar slightly diluted with water for cleaning. You can’t dry natural products in the sun or overly moisturize them, so as not to spoil the interior. Only white fur after bleaching can be dried in the sun.

When is the best time to go to dry cleaning?

Home washing does not always cope with stains. In winter, wool is susceptible to temperature changes. There is a risk of chemical reagents that are sprinkled on the streets getting on the pile. They, together with snow, can damage the structure of the fur.

If the item has not been cleaned during the winter, take it to the dry cleaner after the end of the season. Fur capes are processed 7-8 times during their service life. Employees are warned if the wool is artificial or dyed. For washing, gentle products will be used that do not change color or structure.

A natural fur coat, stole or down jacket with a fur collar looks expensive and elegant. Clothing requires proper and timely care. Having carefully studied the manufacturer’s instructions and selected products for dry and wet washing, the product will delight you with its appearance for a long time.

Processing a fixed collar

If the specified part cannot be separated, when choosing a washing method, you will have to take into account the material from which the jacket is made. If you are not sure about the safety of the fur, you should take the down jacket to the dry cleaner. There is another option: you need to wash your outerwear in a machine using tennis balls. This method has caused a lot of controversy. Acceptable washing methods are usually indicated on the jacket label. All the necessary data is indicated there.

We recommend:

How to wash tulle correctly

How to wash natural fur and not spoil the product

Any fur product gets dirty sooner or later. If this happened “early,” then, most likely, the fur was improperly cared for and stored in inappropriate conditions. As a result, it may lose its shine, the undersides will become clogged with dust and dirt, and the clothes will develop an unpleasant odor. It will no longer be possible to remove all this with ordinary cleaning. Heavy artillery is used - dry cleaning. But how to wash natural fur if the services of specialists are unavailable for one reason or another?

It is forbidden to wash natural fur! More precisely, it is not recommended to soak them in water, since this can lead to the most undesirable consequences: they will shrink, come out, shed, become discolored, and the glued areas will come apart. How to be? You can take a risk, or you can wash it using gentle methods - the so-called “dry” wash. They are partly similar to how to wash a natural fur coat, but there are also differences, for example, when you need to wash a small item such as a collar.

How to wash in a washing machine

If there are no prohibiting marks on the label, it is permissible to wash a white down jacket (with natural or artificial filling) in the washing machine. For this:

Place the jacket in the drum, distribute it evenly around the inside.
Pour in detergent.
Select a delicate mode: “hand wash”, “down”, “wool”, etc. If the jacket has synthetic filling, you can additionally install a pre-soak function.
Activate the extra rinse function.
Set the spin speed to 600–800 rpm. High speed will lead to the fluff rolling off, the filler will begin to break through the seams and fabric.
For better rinsing of detergent, maintaining the shape and lightness of the filler, place 3-4 laundry balls in the machine drum.
Start the cycle.
After the end of the cycle, evaluate the quality of the wash: squeeze the sleeve in your fist. If foam appears, rinse the jacket again. To do this, you can run any short washing cycle (20–30 minutes) at 30 degrees without detergent. Rinsing in warm water better removes powder residue and prevents streaks from appearing on white fabric.
Place the down jacket to dry.

If the machine has the ability to additionally set the temperature, limit the water heating to 30 degrees; if not, just select one of the modes listed in the instructions above.

If, as a result of active wear, a white down jacket has acquired a gray tint, it is permissible to use oxygen or optical brighteners when washing in a machine, but without detergent.

Dry wash

Shake out the fur thoroughly. Knock out all the dust and small dirt from it. After this, vacuum using the upholstery attachment on the vacuum cleaner. Perhaps this will be enough to clean the fur product. No? Then let's move on to the next step.

You can wash your fur at home using clean warm water and a suede brush. Wet the brush and go over the clothes in the direction of the pile. There is no need to wet it too much. After this, comb the product, without immersing the comb too much, so as not to tear out the fuzz. Next, the fur item should be allowed to dry and combed again. As a rule, ordinary dust stains can be easily removed in this way, and further washing is no longer required.

By the way, if there is fresh snow outside, you can use it instead of water. This way the fur will absorb less moisture and reduce the risk of it becoming deformed.

Using the washing machine

Those housewives who had to face the question of whether it is possible to wash natural fur and its artificial analogue need to know that machine washing of such items is permissible only if the household appliance supports a delicate mode, that is, the entire process takes place at a low number of drum revolutions and low temperature.
It would be great if the washing machine also has vertical loading. To do laundry, you need to purchase a mild detergent; fortunately, there are a lot of such products available now. You cannot wash other items at the same time as synthetic fur items, even those made of the exact same material.

Procedure for machine washing:

The item is placed in the washing machine tub. If it has vertical loading, it is first filled with water 50% and not turned on. Front loading models include a soak option.
After 10-15 minutes, the household appliance is switched to delicate washing mode. Soaking things for more than half an hour risks the fact that the chemicals in the detergents will begin to destroy the synthetic material.
Some washing machines have a gentle spin mode - this is exactly what is needed in this case. But if there is no such function, you will have to manually remove excess moisture from the item so that the drum does not fray the lint. The main thing is not to overdo it, squeezing the thing with your palms.
After finishing washing, hang the item in the bathroom and wait until the water drains from it. After this, you can hang it on the balcony, protecting it from direct sunlight, which can damage the fabric.
The final touch should be combing the pile. A soft, wide-toothed brush will do. Comb the faux fur carefully, without making sudden movements.

Hand washing and gentle machine washing can remove dust, light stains and refresh the appearance of your synthetic fur product. But whether it is possible to wash factory-made fur, namely to remove stubborn stains from it, is not entirely clear.

Experts are in a hurry to rejoice - and this is possible, but, of course, no one can give guarantees that the thing will regain its previous appearance.

To remove old stains from synthetic fur items, you can use the following recommendations:

If you need to clean a collar or cuff that has become very greasy from contact with the skin, you should mix a tablespoon of gasoline or alcohol with a small amount of potato starch, and then apply the resulting slurry to the greasy stains, wait 15 minutes, and then remove with a damp sponge.
There is nothing difficult about washing a hood made of such fur. The simplest solution is to buy a special stain remover for synthetic materials. If this does not help, then the pile is treated with a cleaning agent in the form of an aerosol or foam. Taken together, these measures will allow you to clean the fur as much as possible.
Things are more complicated when you need to wash the faux fur from a down jacket. It is impossible to wash a synthetic lining without a down jacket if it is not detachable. Then dry clean with a brush and surface stain remover. Cleaning with a cotton swab dipped in an alcohol-containing solution gives good results.
You can restore the previous color of white fur by trying to apply lemon juice diluted with water on it, but it will be extremely difficult to return the former whiteness in this way.

By adhering to basic rules and practical tips, you can perfectly wash faux fur without even taking your favorite item to the dry cleaner.

Attention, TODAY only!

Fur products are not only warm, but also very beautiful. Such items in the wardrobe are usually in demand for more than one season and never go out of fashion. But over time, the fur gets dirty, spots appear on it, dust settles and the color may even change. Then the question arises of how to wash fur and products made from it correctly and safely in order to return things to their original appearance. In this case, you should follow some rules and try to be as careful as possible throughout the entire process.

Traditional methods

In order not to spoil the fur item, people came up with a replacement for water. Instead, you can wash natural fur in rye or oat flour, potato starch, wheat bran, sawdust and many other “detergents”. Each of these methods has its own characteristics:

Rye or oatmeal flour is poured into a bowl, basin, natural fur is put in there and coated generously, “washing”. After this, you need to shake out the remaining flour, vacuum it if necessary, and then hang it in a well-ventilated place out of the sun. Finally, comb.
Sprinkle the fur with potato starch. Mix a little shampoo in warm water (you can take animal shampoo), put the resulting solution in a spray bottle and spray it over the starch until it takes on a dough-like appearance. The “dough” is spread and left to dry. Then remove everything with a brush, comb and leave to dry.
If you are wondering how to wash white fur, you can do this using 5 percent hydrogen peroxide. It will remove yellowness and restore shine. Soak a cotton swab in peroxide and walk in the direction of the pile; if the pile is short, then against it. You can also wrap cotton wool around the teeth of a comb, soak it in peroxide and walk over the product.
Wheat bran is mixed with a small amount of gasoline and placed in a bowl or basin. Fur is washed by weight: hold the item to be washed in one hand, take the “detergent” with the other and rub it gently into the pile. Next, comb and hang in a ventilated place.
Hardwood sawdust. They are treated in the same way as with wheat bran. You just need to choose clean sawdust, and in no case from coniferous trees.
Hot sand. The sand is heating up in the oven. Natural fur is laid out on a flat surface, sand is poured on top and rubbed over the product. If it is not washed, then the dirty sand is replaced by clean sand, and the procedure is repeated.

Petrol

Treat greasy and greasy areas with purified gasoline. If the collar has not been cleaned for a long time, this method will save it.

Gasoline is an excellent degreaser, but it smells unpleasant. After such cleaning, the edge will need to be washed by hand or in a washing machine using a powder or gel product.

A sponge is soaked in gasoline and the greasy areas are wiped. It is necessary to wipe a product with a short pile against the pile, and with a long one - along it.

Refined gasoline should be used away from open flames.

You can also use the following remedy: 2 tbsp. l. starch flour is mixed with 200 ml of gasoline. The mixture is applied to the edge with a foam sponge in a thick layer.

After 30 minutes, shake the collar to remove any remaining flour. Then heat the potato starch in a frying pan, pass through a sieve (to remove large lumps) and wipe the fur with it.

This product will remove any remaining gasoline mixture. After such cleaning, you need to take the product out onto the balcony so that the smell disappears.

How to wash in water

If the described methods do not help clean the clothes, and you cannot get to the dry cleaner, then you can take a chance and wash it in water. It should be understood that the answer to the question “can fur be washed?” an unequivocal “no”. Therefore, any independent attempts are a big risk. You can, of course, see a lot of phrases on the Internet: “I washed it, and everything is fine,” but this is not a guarantee that it will be the same for you. Natural fur can become deformed, stretch, shrink, in other words, deteriorate or lose its original appearance. If you are ready to take a risk, then consider the most gentle way to wash natural fur.

First, check that your fur item can withstand washing. To do this, prepare a solution of 50 ml of water, 1 drop of shampoo and 2 drops of ammonia. Apply it to the fur in an inconspicuous area, pull the fur in different directions, and if there is no deformation of the fur, it does not tear, then perhaps your clothes will survive the wash, or at least not come apart.

Must be washed by hand. Of course, you can wash fur in a machine, but only to see how badly it will deteriorate. Mechanical washing is strictly contraindicated. It's not even considered.

Start washing in water only after dry cleaning has already been completed, i.e. dust and fine dirt are knocked out. Otherwise, the water will only drive them further into the canopies, cementing them, so to speak.
Take a detergent special for fur. If there is none, then regular shampoo or pet wash will do.
Water temperature – up to 40 degrees. There should be enough of it so that the fur product completely goes under water.
Soak the natural fur for 15-20 minutes. There is no need to rub, crush, or press it, otherwise you will ruin the pile. If there are old stains of dirt, you can scrub them with a soft brush.
Drain the soapy water and add clean water. Rinse thoroughly several times. It is necessary to wash out all the soap solution.
Don't twist it. It is enough to iron it with your palm in the direction of the pile, driving out the water. Next, hold it suspended until the liquid drains.
If you wash a large fur item, for example a fur coat, then you will have to hold it for a long time until it drains. Place a chair with a backrest in the bathroom and hang it on it for at least 6 hours.
A small piece of fur, such as a collar, can be wrapped in a terry towel to absorb excess moisture.
The dried fur is combed with a wooden comb as far as possible. Next, hang it out to dry in a ventilated place. Not under a heater, not under the sun.
Once it dries, comb it again.

With this, the question of how to wash natural fur can be considered resolved. If the fur remains unchanged, then you are very lucky. Well, if it’s spoiled, don’t be sad, there are many solutions for what to do with it: peel it, give it as a gift (if it’s worn out), use it under a rug.

Rules for cleaning permanent material

Is it possible to wash a fur collar from a down jacket? If the collar or hood cannot be removed from a down jacket, this does not mean that it cannot be cleaned. There are different options for this situation:

The simplest thing is to take your clothes to the dry cleaner.
If the fur is machine washable, send it there with your jacket.
Or wash the product by hand.
In some cases, when washing the jacket itself is undesirable, clean the fur using a dry method. At the same time, try not to stain the rest of your clothes.

The complex process of cleaning a fur product turned out to be not so difficult. The most important thing is to understand what kind of fur is in front of you: natural or artificial. After this, all that remains is to choose the most suitable recipe and strictly follow all the recommendations.

Source

How to wash natural and faux fur

First you need to figure out what kind of material you have to deal with. Faux fur products withstand various deformations, tests, and washing. Therefore, they can be washed in any convenient way. The most important thing is not to overdo it with the water temperature. Otherwise, there is a risk that the fibers will become deformed and lose their smoothness and shine.

To properly wash natural fur at home, you need to thoroughly prepare. Such items of clothing are easily damaged beyond repair. This is due to some production features:

When preparing the fabric for sewing fur clothing, the animal's natural lubricant is partially washed away, which prevents them from getting wet. Thanks to this lubricant, the animal does not get wet for a long time in the rain. The main task of the manufacturer is to preserve this natural segment as much as possible. The more careful production is, the more complex the equipment will be required and the more expensive the cost of clothing will be.
Tension of the pile base. The skin under the fur is stretched with special force. This is done in saving trees to use less material to produce more products. Weakened skin under the influence of moisture after drying is easily deformed and loses its appearance.

Thus, in order to clean a fur product made from natural linen and not spoil it, you should approach the procedure with maximum responsibility.

Preparation

You can refresh your fur collar at home. The main thing is to comply with certain conditions of the preparatory stage:

Before washing be sure to:

remove the removable collar from the jacket;
determine the type of fur (artificial or natural);
carefully study the information on the manufacturer’s label about the temperature conditions and special cleaning conditions of the product;
Before washing, gently shake the edge on the collar.

Washing a down jacket at home

The choice of washing method depends on the type of edge. In order to determine whether faux or natural fur was used during tailoring, it is necessary to examine the underside of the collar. On the synthetic material, thread overflow is visible on the reverse side.

If the edge is artificial

Hand washing will help refresh a long-pile faux fur collar.

The technology is simple and clear:

Pour water into a container of suitable size, the temperature of which does not exceed 40C.
We dilute liquid powder or washing gel in water.
Soak the fur collar in a basin for thirty minutes.
Gently rub soap foam into the long pile.
We rinse the edge in plenty of water (cool).
We take the product out of the water and place it on a horizontal stand and leave it for ten minutes.
After the water has drained, gently blot the edge with a towel.

Dry the product away from heating devices, laid out on a horizontal surface. After the edge has dried, the long pile is carefully combed with a comb with rounded teeth.

For faux fur collars with short, thick pile, machine wash is more appropriate. Before loading the item into the machine, check the label on the possibility of automatic washing.

Algorithm of actions:

The edge is soaked in a bowl of warm soapy water for fifteen minutes.
After lightly squeezing the product with your hands, it is placed in the washing machine. For washing, choose a delicate cycle, using gentle liquid detergents for silk, wool and delicate fabrics.
Wring out the collar by hand, blotting it well with a towel.

If natural

You can preserve the shine and attractive appearance of natural fur trim by using only the manual washing method.
Algorithm of actions:

Liquid detergent for delicate fabrics or shampoo is diluted in a bowl of water.
Use a soft sponge to rub soap foam into the edge.
Wipe the collar again with a clean sponge.
Lay the edge on a horizontal surface and leave until completely dry.
Comb the villi with a sparse comb (preferably wooden).

How to clean white fur

Self-cleaning fur on light-colored items is only necessary if yellowness appears on the fur. Many women, faced with this problem, do not know how to clean white fur correctly. In order to remove the yellow spots that have formed on a fur coat or hat with a pompom, there are a lot of folk methods using improvised means:

Hydrogen peroxide

Add 10 ml of hydrogen peroxide to 0.5 liters of water.
Pour the resulting mixture into a spray bottle.
Spray the product on the stain or the entire surface of the item, depending on the scale of the problem.
Take the product outdoors.
After it dries, comb the pile with a comb.

Alcohol and soda

In 300 ml of water, add 5 ml of alcohol and 15 grams of soda.
Soak a brush or sponge with the resulting solution.
Treat the surface of the blanket or fur coat.
Dry the item.

Alcohol and glycerin

It is necessary to add 100 ml of vodka and 5 drops of glycerin to 0.5 liters.
Pour the product into a spray bottle and use it to spray the mixture onto the pile.
Treat the surface of the blanket or fur coat with a soft brush.
Dry the item.

How to wash faux fur items

Before choosing a method, pay attention to the length of the pile. Long pile of more than 4 cm will deteriorate when machine washed and will not be able to take its previous shape. These items can only be washed by hand:

Pour warm water into a basin. The temperature is not higher than 40 degrees.
Dissolve the selected product. It is better to use washing gel or liquid soap. Regular powder does not rinse well.
Immerse the item in soapy water.
Leave for 20 minutes.
Carefully clean the item. Pay special attention to the most contaminated areas. On jackets and fur coats these are sleeves, cuffs, pockets, and the bottom. On hats and mittens the edges of the product. Then clean the rest of the item. You can use a soft brush.
Rinse the item several times until the soapy water stops flowing.

To wash faux fur in a washing machine, repeat the following steps:

Examine the label on the clothing. You can proceed only if there is no ban on machine washing.
Load into the drum separately from other things.
It is recommended to soak heavily soiled wardrobe items first. To do this, fill a basin with warm water and add liquid laundry detergent to it. Wait 20 minutes, do not exceed the specified period.
Take the clothes out of the water and wait a bit for the water to drain.
Load into the machine.
Add detergent. You can also choose detergents designed for wool or delicate fabrics.
Suitable mode is Wool, silk, hand wash. The temperature should not exceed 40 degrees. Spin is permissible no more than 300-400 revolutions; if there is no such mode, it is better to turn off the centrifuge altogether.
Run the program.

Important! If there are stains on a fur coat or other item of clothing, it is better to pre-treat them before washing. Many stains can be easily removed with regular laundry soap. You just need to soap the stain and wait 10-15 minutes.

It is better to dry faux fur items after the maximum amount of water has drained. After this, the clothes are placed on a hanger and placed in a well-ventilated area.

We erase

Purchase shampoo at the pet store to wash animals with light fur. When washing the product, follow the following procedure:

Pour some water into the bowl. Its temperature should not be higher than +30 °C. Dissolve a little zoo shampoo in the liquid.
Place the edge in the solution for half an hour.
Gently rub dirty areas with your hands. Do not squeeze or ball the fur, otherwise it may lose its shape.
Remove the product and rinse the basin. Completely clean the container of any remaining soap solution.
Pour cold water into a basin and rinse the edge thoroughly so that no traces of shampoo remain on it. Change the water several times if necessary.

How to dry

This is perhaps the most difficult thing. A wet fur coat weighs a LOT. Few hangers can handle that kind of weight. You can do the following: place a bath seat (if you have one) and lay the wet item on it. Instead of a seat, you can use any two boards.

When most of the water has drained (after about 3-5 hours), place a chair with a back in the bathroom, hang the fur coat on it, trying to straighten it as much as possible. So leave it to dry for 8 hours.

When the fur dries, you can try to comb it with a regular wooden or plastic hair brush. Do not scratch wet areas, as you may tear out the down.

After the fur has completely dried, comb it again and proceed to the most important thing - fitting. That's all!

How to wash natural furs

The manufacturer always indicates whether this product can be washed in a washing machine on the label. If it is not available, be sure to check this information with the seller.

You can also clean natural furs in a washing machine, depending on the length of the pile and the quality of production. It is better to hand wash items of questionable quality or even use dry cleaning.

Also pay attention to the possibility of detaching the fur parts. Manufacturers often make it possible to clean the collar and cuffs separately from all outerwear.

Important! Washing real fur in a washing machine is very risky. There is a high risk that the product will become deformed and the clothing will be permanently damaged. It is better to resort to this method of cleaning only in the most extreme cases.

You can’t put a whole fur coat or sheepskin coat into the drum of a machine and there is no need for it. It is better not to wash such a product using technology. Small items with short pile and reliable quality are washed as follows:

Load the fur coat into the drum.
Add detergent to the special compartment. It’s better not to save money here and visit a specialized store to buy a suitable laundry detergent. Use only liquid versions. Do not use conditioners or rinses to avoid damaging the fibers of the material.
Set mode. Suitable for Wool, Silk, Hand wash. When choosing the parameter yourself, select a temperature not higher than 40 degrees, turn off spin completely.
Launch the program.
After this, allow excess water to drain as much as possible.
Dry the product.

To dry the natural material, you can wrap it in a terry towel. The moisture will be absorbed into the towel, after which you can take a dry towel and repeat the manipulations. Then they resort to drying in the fresh air.

Important! Drying in electrical cabinets, using hair dryers and irons is prohibited.

The fur product must be completely dry. There is no need to leave it in direct sunlight, this will ruin the delicate material. But you shouldn’t go out into the cold wearing clothes that aren’t completely dry.

Washing fur coats at home

In order to know how to wash fur and perform this procedure correctly, you must adhere to some rules.
So, first of all, remember that products made from natural fur are strictly prohibited from being washed in a washing machine. The fact is that machine washing can easily ruin them, so wash furs only by hand. This procedure must be performed in a large bath using a large amount of water. In this case, you will need to use exclusively liquid detergents intended for washing wool, mohair items or for delicate washing. This limitation is set so that the pile on the fur coat does not get tangled or rolled up.

In addition, it is prohibited to apply significant force to fur products during washing. For example, they cannot be rubbed like fabric products. In this case, the temperature of the water in the container should be equal to the temperature of fresh milk. Before starting the procedure, you need to wet the fur well, for which you need to keep the fur coat or jacket in water for 10-15 minutes.

In this case, during washing, you need to place sticks crosswise on the bathtub or place a small bench. This way, you can place your fur items on them to allow excess water to drain away.

Under no circumstances should you leave unwashed washing powder on the fur, which can ruin it; you should rinse it in warm water and then in cold water. In addition to cleanliness, this procedure can add shine.

After rinsing, the fur coat will need to be allowed to drain over the bathtub. Next, it is hung on wide, strong hangers that can withstand the heavy weight of the product. The fur coat should be dried away from direct exposure to sunlight, and during the drying process it must be constantly combed in all directions, giving it shape.

Despite the fact that almost all guides on how to wash a jacket with fur prohibit washing natural products in a washing machine, you can easily wash a synthetic product in it. To do this, place it in a cloth bag or pillowcase and wash it on a delicate cycle using washing powder designed for washing mohair or woolen items. Such items must be rinsed at 500 rpm.

The fur is damaged after washing, what should I do?

Most likely, the fur coat you washed was unsuccessful. Options for using a damaged item:

If the appearance remains acceptable, but the fur coat has shrunk several sizes, give it to another person.
If you are doing needlework or sewing, then the least damaged areas of fur can be cut out and used to sew the intended product.
If the fur looks unpresentable, then it can be used as bedding for pets.

Fur coats last a long time: from rabbit - 4 years, from arctic fox - 7 years, from mink - 12 years, from beaver or otter - 20 years. Since they cannot be washed, you need to use them correctly:

Wear a fur coat only in cold weather. Wet snow and rain damage fur.
If you do get caught in the rain, do not dry the product over a fire or near heating devices, avoid drafts.
You cannot iron a fur coat even from the lining side!
Fur deteriorates when exposed to direct sunlight and light. Therefore, store your fur coat in a dark place.

In summer, it is best to store a fur coat in a special refrigerator, where it is dark, the humidity is maintained at about 60%, and the air temperature is within +2-+5 °C. If this service is not available, give the item enough space in your closet so that it does not come into contact with other clothing. Before placing it in the closet, carefully knock the dust out of the fur.

The fur coat should hang on wide hangers, the slope of which corresponds to the angle of the shoulder seams. Be sure to have a special breathable blue cover that will help preserve the color of the fur. There should be a gap between the cover and the coat hanger so that the fur does not get crushed.

Dry cleaning methods

Before soaking your natural pile fur coat, you should try to refresh it using the following methods:

Starch. Pour it onto the contaminated area and leave for 20 minutes. The procedure can be repeated several times. After this, thoroughly shake off the remaining powder. This is a safe way to restore the purity of the Arctic fox's fur and return it to its original appearance.
Table salt together with ammonia will remove greasy traces and restore whiteness. To do this, mix 1 tbsp. spoon of salt, 3 tbsp. spoons of ammonia and a glass of water. Moisten the swab in the prepared solution and carefully treat the desired surfaces. After drying, the product will become cleaner.
Hydrogen peroxide. If you soak a cotton swab in it and treat the dirty parts of the product, you can restore its whiteness and get rid of small stains.
Semolina. Using this ordinary powder, you can slightly refresh a fur product. Pour the powder onto the pile and leave for 30 minutes. After this, carefully shake out the grain from the pile.
Mustard powder. It is better to use for darker products. Sprinkle it on fur clothing and leave for 25 minutes. Dry the clothes thoroughly.
Cereals. They will help restore clothes made from sable fur. The flakes need to be heated in a frying pan and allowed to cool slightly. Sprinkle hot flakes onto the fur and begin combing.

After dry cleaning, be sure to dry out the clothes well, let them dry and ventilate in the fresh air. Finally, simply brush your clothes with a soft brush.

Thus, washing natural and faux fur at home is a risky business. If the item is really expensive, then it is better to entrust it to professionals and go to dry cleaning. If you dare to clean your wardrobe items yourself, strictly follow the recommendations and choose the most gentle methods.

Dry cleaning

With its help you can cope with minor stains. The procedure is quite simple. First you need to knock the dust out of the fur. After manual cleaning, you can use a vacuum cleaner. To avoid damaging the fur, be sure to attach an attachment for upholstered furniture to the device.

To choose the most suitable method, it is necessary to determine the type of fur. The process of refreshing the appearance of products made from arctic fox and rabbit fur is the same. The same can be said about high-quality faux fur. If the stains do not disappear after dry cleaning, you need to turn to more effective methods.

Ways to update the appearance of a fur product

If it is necessary to just slightly refresh a fur product, then there are several folk methods by which you can do this quickly and easily:

Using bran

Heat the wheat bran on a baking sheet or frying pan.
Distribute them over the fur item using rubbing movements.
Leave the fur coat in this condition for 15–20 minutes.
When the time is up, remove the bran and clean the fur.
This product is more suitable for products made from rabbit or sheepskin.

Hot sand

Place the fur coat on a flat surface.
Apply sand to it.
You need to rub it into your fur coat.
Remove dirty sand from the product. Carry out the procedure several times until the sand is clean.

Typically this remedy is used for silver fox or arctic fox.