How to use an Electrolux washing machine: how to make the first start, where to put the powder, how to clean the Electrolux washing machine?

Electrolux washing machines are distinguished by their stylish design, functionality, and high build quality.
The device incorporates the latest achievements of developers in terms of electronics, allowing you to control the washing process from the moment you load the laundry until the end of the working cycle.

You can appreciate all the advantages of Electrolux washing machines only if you use the household appliance correctly.

We will tell you further about how to properly use an Electrolux washing machine.

First launch of the Electrolux washing machine

After the washing machine is delivered to your home, unpacked, installed, connected to the sewerage system, the water supply system comes the most crucial moment - the first start.

In the instructions, the manufacturer indicates that the first wash should be “idle”, i.e. without underwear.

This recommendation is due to the fact that during the assembly of household appliances, particles of oil and other technical liquids settle on the inner surface of the drum. The first wash without laundry helps clean the drum walls from dirt.

Algorithm of actions:

check that the washing machine is connected correctly, plug the device into the outlet;
pour 2 tbsp into the main wash compartment. powder;
on the control panel select the “cotton” washing mode, water temperature 60°C;
close the hatch door (tank is empty);
start the washing process (press the “Start/Pause” button).

During the first wash, it is very important to monitor the operation of the washing machine. If connected incorrectly, there is a high risk of leaks. If such a situation occurs, you must immediately turn off the water supply tap, turn off the household appliance from the network, and eliminate the cause of the leak.

Safety precautions when using an Electrolux washing machine

The developers took into account almost everything to ensure safety during its operation. However, manufacturers consider it their duty to still provide some safety recommendations.

After transportation, the machine should be checked for damage. If any are detected, the machine should not be installed and put into operation until they are eliminated;
Before loading, you should check that there are no foreign objects or pets in the drum;
You cannot change the technical characteristics or design solutions of the machine. After such modernization, the washing machine may become dangerous during operation;
If an operating mode with high temperatures is used, the door glass may become hot. Therefore, in order to avoid getting burned, you should open the door only after it has completely cooled down;
Wash small items (socks, handkerchiefs) in special bags or pillowcases. This will prevent them from getting into the cracks between the drum and the tank;
You cannot load things into the car that have parts made from whalebone plates, as well as torn or raw-edged clothing;
You should not repair the car yourself. This may lead to an accident.

The signs on the control panel of an Electrolux machine are not clear to everyone. On some models there is the name of each program, on others there are only symbolic images.

What if you need to select a specific function for a specific type of laundry? You can look at the instructions. But if it is lost or you bought a used washing machine, you will find the meaning of each SM Electrolux washing mode in our article.

Washing modes and times in the Atlant washing machine

Preparing for washing

Preparation for the washing process proceeds according to the following scheme:

The household appliance is connected to the power supply (separately installed, grounded outlet). The Start/Pause or Power button indicator on the control panel should light up.
Sort dirty laundry. Everything that requires washing is divided into groups: according to degree of contamination, color and material of manufacture. It is unacceptable to wash colored and white items together (the result is damaged, faded clothes). Hand-embroidered items and hand-knitted items are washed separately.
Load the drum of the washing machine. The maximum amount of dirty laundry (weight) that can be loaded into the drum depends on the model of the washing machine (the necessary information can be found in the data sheet of the household appliance).

For synthetic items, the maximum loading level does not exceed a third of the drum volume, for knitted woolen items - a maximum of half the tank. With a maximum load of products made from natural, dense fabrics, there should be enough free space in the drum to fit the palm of your hand.

Functionality

The Swedish company Electrolux produces about 20 high-quality models of top-loading washing machines, which differ in the number of functions and price. Like front-facing units, Electrolux vertical washing machines have a standard set of programs and functions:

“Start/Stop” button, which helps you adjust the washing time to your personal needs.
Accelerated washing mode, or Daily (suitable for washing clothes with a minimum of dirt).
Adjustable spin speed or the ability to wash without spinning, which allows you to reduce the number of wrinkles on things.
Program switch, which allows you to select the necessary washing parameters.
Pre-wash mode designed for heavily soiled clothes.
The “Extra Rinse” function, with which you can achieve better leaching of detergents from your laundry.

Vertical machines have the same set of programs as front models

In addition to the main programs, a top-loading washing machine allows you to stop the drum after the final rinse without draining the water. Thanks to this feature, fewer wrinkles form on clothes.

Mode selection

There are many symbols on the control panel - encrypted meanings of the main washing modes and additional functions of the Electrolux washing machine.

Main modes:

Auxiliary programs (selected depending on the type of laundry):

Additionally, the display of the control panel of the washing machine displays information about how much time is left until the end of the wash, the number of spin revolutions, and the water temperature in the tank set by the selected program.

Video review of the modes of the Electrolux washing machine:

3 in 1 devices: wash/dry/steam

The functions of 3 in 1 washing machines include: washing clothes, drying them and steaming them. The devices provide a full laundry processing cycle and help care for even woolen and delicate items. The full care cycle is carried out within the framework of one program; at a time you can handle a maximum of 7 to 10 kg of laundry using only washing or from 4 to 7 kg in drying mode.

OptiSense system , which is used in Electrolux 3 in 1 washing machines, automatically detects the amount of laundry and selects the required mode.

Washing machines with intelligent control independently weigh the items loaded into the drum, according to which they select the optimal program for processing them.

Starting a household appliance

The process of preparing for washing is completed, the desired mode has been selected, there are a few more steps left to perform before starting the washing machine:

Select the required temperature mode (varies from 30°C to 95°C). So light, delicate items are washed at a temperature no higher than 30C, cotton items -40°C-60°C. A temperature maximum of 95°C is used for very soiled bed linen or bath items.
Set the required number of spin revolutions. As a rule, when selecting a washing mode, the program automatically sets the desired spin parameter, but if necessary, it can be changed using the corresponding button on the control panel.
Pour washing powder into the detergent dispenser compartment.

Where to put the powder: on the left side of the powder receptacle there is a compartment for the main wash, on the right side - for pre-wash, in the center - a compartment for conditioner and rinse aid.

Information about the amount of washing powder required for one wash can be found on the packaging of the detergent. You should not exceed the recommended standards . Otherwise, saving powder will reduce the quality of washing, and increasing the rate will lead to excessive foam formation, which can damage the Electrolux washing machine.

After all the preparatory measures have been completed, you can start washing. To do this, press the “Start/Pause” button. The indicator on the control panel will stop flashing, and the machine will start the initial stage of washing - drawing water into the tank.

Features and main advantages of the Electrolux washing machine

Electrolux washing machines occupy a special place among the family of “smart machines”. They undergo strict quality control and parameter testing process. All models meet the requirements for the highest washing and energy consumption indicators - class “A”. The logical part of the washing machine contains the latest advances in electronics that can control the technological process from the moment the laundry is loaded to the full end of the working cycle. In addition, the Electrolux washing machine has a number of features that distinguish it from models from other manufacturers. Here are some of them:

The traditional operating procedure of the “Soaking” program has been changed. The peculiarity is that the process lasts from 18 to 24 hours depending on the machine model. After this, you can simply remove the water and finish the work, or continue it, but in a different mode. The peculiarity of this program is that the laundry is washed only for the first 20 minutes at a temperature of 30 degrees. Then the heating stops, and the drum rotates every 40 seconds until the “soaking” cycle is completed. The laundry is in the tank and retains heat for a long time. This is due to the fact that the tank is made of carborane. This material combines the properties of stainless steel and polymer materials. A carborane tank not only retains heat for a long time, but also reduces the noise level when the machine is operating;
Direct Spray technology. The technological process ensures constant impregnation of the laundry with a stream of detergent. The jet is formed under the action of a mechanism that creates pressure and is directed directly at the things loaded into the tank. This treatment leads to foam penetration deep into the structure of the linen, and preserves the fabric fibers from damage. The quality of washing is controlled by a microprocessor of the amount of water. This is important because if there is excess water in the tank, the friction between things is weakened and the quality of the wash decreases. If the quantity is small, the laundry is not sufficiently wetted with detergents.
Eco-Valve technology. It is designed to control the consumption of detergents and water. This makes it possible to significantly save consumable resources. This technology prevents washing powder from accumulating in the water drain hose. In addition, it prevents the process of mixing clean water with its residues from the previous rinse.
Fuzzy Control technology. It is designed to control the foaming process in the “Rinse” and “Spin” modes. The program regulates the process time depending on the intensity of foam removal;
The automatic balancing function “Fuzzy Control” has been improved. This mode allows you to eliminate imbalances in the spin cycle in case of clumps in the washed clothes without user intervention. The important fact is that if it is not possible to untangle the lump, then the operating mode goes into the region of reduced speed;
added “Hand Wash” function. This allows you to use the washing machine even for processing items that can only be washed by hand. This mode is based on the principle of “swing” technology. First, the drum makes half a revolution in one direction, then a minute pause and only after that it rotates in the opposite direction. Slow rotation of the drum and long pauses do not damage delicate items;
The rinsing system has been improved. Removing soap scum has become more effective. When rinsing, water is supplied under pressure and combined with a short spin. In this case, the water does not drain. This technology allows for uniform rinsing. When washing white and colored clothes, the number of rinses has been increased to 6 times in one cycle, and synthetic fabrics to 4. The “Intensive Rinse” function has also been improved. Now you can set separate modes for rinsing certain types of fabrics;
Added Rinse Stop mode. It is used when it is not advisable to drain the water after completing the rinsing process. In this case, the laundry can temporarily remain in the machine;
added automatic water cooling function. It prevents the occurrence of a “temperature shock” effect in sewer pipes when hot drain water enters them. This often leads to their premature wear.

What to do after?

Once the washing is finished, you must:

unload washed laundry from the drum of the washing machine;
Wipe the rubber cuff from moisture with a clean cloth (additionally check the seal for stuck small items of clothing);
slightly open the detergent dispenser (if there is any undissolved powder left in the tray, it must be removed);
open the hatch door slightly for ventilation (ventilation of the inner surface of the drum prevents the formation of an unpleasant musty odor).

Do not try to open the hatch door immediately after the sound signal for the end of the wash. The UBL keeps the door closed for another 2-3 minutes. Sudden movements or tugging can break the lock.

How to care for equipment?

Regular, proper care will help extend the trouble-free operation of your Electrolux washing machine.

So the drum and powder compartment are wiped at least once a week with a soft sponge using baking soda paste (the dry powder is diluted with warm water until it becomes a thick paste). Such actions help clean surfaces from limescale and other impurities from hard tap water.

Don't forget about the rubber cuff around the hatch. It is in its folds that the largest amount of dirt collects, which can be cleaned with a soft toothbrush and baking soda paste.

The rubber seal cannot be cleaned with chlorine-containing compounds (for example, Belize). Otherwise, the cuff will very quickly lose its elasticity and become covered with cracks.

The drain filter and water inlet filter require special attention. To avoid problems with draining waste fluid, it is necessary to clean the drain filter once every ten days. You can find it in the lower part of the hull behind a small hatch.

The drain filter is unscrewed (counterclockwise movements), cleaned of hair, threads and other debris, and then installed in its original place.

Covered with a layer of impurity particles from tap water, the water inlet filter blocks the process of water entering the washing machine. How to clean it? To do this, on the back panel of the washing machine body, unscrew the fastening nut of the inlet hose, from which, using a flat screwdriver, carefully remove a small metal mesh - the inlet filter. The mesh is cleaned under water pressure with a toothbrush , and then installed in its original place.

Once a week, wipe the body of the washing machine with a soft cloth or sponge moistened with soapy water.

Errors (on screen) and what to do about them?

The self-diagnosis system, which is equipped with most models of Electrolux washing machines, helps to quickly determine the cause of the problem and restore the normal functioning of household appliances. The error code displayed on the information display on the control panel will tell you what exactly caused the malfunction:

Error E01 (EA1), E02 (EA2), E04 (EA4), EA5 . Problem: The washing machine does not spin the drum. What to do: check the drive belt, test the drum self-positioning device.
Error E03 . Problem: The washing machine does not heat the water. What to do: test the heating element relay and heating element with a multimeter (replace if necessary).
Error EA6 (typical for top-loading washing machines). Problem: The drum does not rotate. What to do: check the drive belt, restart the wash.
Error E10 (in some models E11) . Problem: lack of water supply to the tank. What to do: check the water pressure in the tap, inspect the hose for breaks and kinks, test the fill valve.
Error E13 . Problem: leaks in the system. What to do: disconnect the washing machine from the power supply, call a specialist for detailed diagnostics and repairs.
Error E20, E21 (C2), E23, E24 . Problem: no water drainage. What to do: check the drain hose and the drain pump impeller for blockages, test the drain pump.
Error E31, E32, E33, E34, E35, E38 . Problem: the tank is not completely filled with water or the water level exceeds the permissible limit. What to do: test (replace if necessary) the pressure switch, clean clogged areas of the sensor.
Error E40, E41, E42, E43, E44, E45 . Problem: The machine does not start the washing process. What to do: check the tightness of the hatch closure, the integrity of the rubber cuff, test the functionality of the UBL, restart the wash.
Error E50, E51, E53, E54, E55 . Problem: The washing machine does not spin the drum. What to do: restart the washing machine, check the functionality of the triac, motor (brushes), tachometer, Hall sensor.
Error E52, E56, E59 . Problem: the tachometer is malfunctioning. What to do: restart the washing machine, ring the controller circuit, test the tachometer (replace if necessary).
Error E57, E58 . Problem: the washing machine does not emit any rotation signals, the washing process is blocked. What to do: check the voltage in the network (most often this problem is associated with very high voltage in the network), test the control module.
Error E61, E62, E66, E68, E69, E3A, E71, E74 . Problem: the machine does not heat the water or the temperature of the heated water exceeds the value set by the program. What to do: check the contacts of the heating element and temperature sensor (replace faulty elements).
Error E90, E91, E93, E94, E95, E96, E97 . Problem: The washing machine does not respond to specified commands from the control panel. What to do: test the control unit elements, clean or replace the electronic boards if necessary.
Error EH2 . Problem: The mains voltage is too high. What to do: check the power supply.
Error EH3 . Problem: The mains voltage is too low. What to do: check the power supply. If necessary, install a voltage stabilizer.

If troubleshooting the error yourself does not lead to the desired result, it is better to entrust the repair of the washing machine to the service center specialists.

Adviсe

By installing the washing machine on a rubber mat, you can significantly reduce the noise and vibration of the body during the washing process.

At the end of the full washing cycle, the household appliance must be unplugged from the outlet (sudden surges in the network voltage can lead to serious repairs to the control module).

Do not pack the washing machine drum tightly. Otherwise, overloaded household appliances will break down very quickly.

Clothing with rivets and other metal fittings must be turned inside out before loading into the drum. This will help protect the inside of the tank from scratches and dents, and your clothes from being snagged or torn.

A special measuring spoon will help you accurately measure the required amount of dry (or liquid) washing powder. If a situation arises that requires adjustment of the specified parameters (for example, it is necessary to change the water temperature), the “Start/Pause” button is pressed again. The green indicator starts flashing and the running process is suspended.