How to clean the filter in the Indesit washing machine: methods and recommendations

Perhaps no one will be surprised today by the presence of an automatic washing machine in a modern apartment. These home helpers have become a part of many people's lives. Modern technologies allow you to simply load dirty laundry into the washing machine tank, add a special detergent, select the required washing program and after a while get clean clothes.

But it’s only at first glance that everything is so cloudless. In fact, every owner should know the basic methods and recommendations for cleaning the filter in a washing machine. Compliance with these rules and recommendations will extend the trouble-free operation of the unit for many years.

Timely cleaning of the washing machine filter is a mandatory procedure, since blockages can lead not only to an unpleasant smell of washed clothes, but also to more serious damage to the unit.

Purpose of washing machine filters

Washing machines from modern manufacturers are equipped with two filters: fill and drain.

A special drain filter is present in any washing machine, and it is connected to the pump of the unit. Its main function is to purify water during washing so that small objects and various debris cannot get inside the tank.

The inlet filter is not installed in all models of washing machines. Structurally, it is a mesh on which various impurities settle. The main function of this device is to purify the water entering the machine from tap dirt.

Regardless of the model used, every owner should know how to clean the filter in the Indesit washing machine. This simple operation must be performed regularly.

Several options for cleaning the Indesit washing machine filter

A regular Indesit washing machine filter gets clogged approximately every six months. It is after this period of time that it must be removed and cleaned manually.

To avoid any problems, some people rinse the part under running water. In case of heavy contamination, the filter can be cleaned with a toothbrush, and the part can also be soaked in a solution of citric acid to remove limescale deposits and unpleasant odors.

For some models of washing machines, you can find a step-by-step explanation in the instructions on how to clean the filter of your washing device. Most often it is the following algorithm :

Remove all laundry from the tub and unplug the device from the control panel and from the mains.
Locate the panel and cover on the panel.
Open the lid slightly and carefully remove your part.
Completely clean the filter that is located there, as well as the hole into which the part is inserted.
Once you have finished cleaning, place the part back and close the lid.

Even in the filter hole, debris often accumulates. It is possible to get rid of it if you arm yourself with something convenient for removing debris, and conveniently attach a flashlight for more effective cleaning.

Suspected problems

If you carry out this procedure only for the first time, then you may encounter some difficulties (not without this, of course, after all, for the first time).

Sometimes the filter, which is located inside the panel, cannot be pulled out immediately, or the plastic cover may break with unnecessary movements. Such situations often arise when the part has never been removed from the machine since purchase, and it has become so dirty that it has managed to get stuck inside. In such cases, when you cannot remove the part yourself, invite an experienced person in this matter who knows better than you what to do in such cases.

And never, never wait for the moment when your machine becomes completely clogged and stops performing its duties normally.

This problem can be easily prevented if you perform a thorough cleaning consistently every six months. This is when your machine can serve you for as long as possible.

Signs of a clogged filter

A clogged filter is considered a malfunction of the Indesit washing machine, which can cause it to stop or malfunction. The main signs of a malfunction of the unit are:

After the washing or rinsing mode, the water drains very slowly, and if the blockage is heavy, it may stop altogether.
During the washing process, the machine stops the program and does not resume it even after the system is restarted.
The control unit issues a signal about incorrect operation or displays an error code on the display, which is individual for different manufacturers.
The spin or rinse mode does not start.
Unpleasant smell from the washing machine, which permeates the washed items.
A filter that is not cleaned in time can cause the pump to break down and it will stop pumping water.

Also, if the drain filter of the Indesit washing machine is clogged, an unusual extraneous sound may appear that accompanies its operation.

In what cases is the Indesit washing machine cleaned?

The frequency with which the drain filter is serviced depends on several factors.
The main ones are the quality of the water being poured and how often the washing machine is used for its intended purpose. A clogged drain filter element (also called a “drainage element”) in an Indesit machine is judged by the following characteristic signs:

Slows down or completely stops draining.
Turning off the unit when selecting the “Spin” mode.
Failure of the “Rinse” option.
Stopping when working in the “Wash” mode, followed by disconnection from the power supply.
The corresponding error code is displayed on the display.

Most often, failure of one of the modes is accompanied by the appearance of unpleasant odors from the drum.

The main reason for clogging of the drainage filter is the ingress of contaminated water containing particles of wool and small debris washed out of clothes during the washing process.

Therefore, regardless of the presence of signs of contamination, it is recommended to clean it at least once every six months or more often (depending on the situation).

Filter location

It is not difficult to determine where the filter is located in the Indesit washing machine. The inlet filter is usually located where the water supply hose connects directly to the unit.

The drain valve is located at the bottom of the unit; it can be found under the filter cover of the Indesit washing machine. Often this important unit is located, regardless of the type of loading of the unit, on the bottom right. In some models it may be hidden under a decorative panel. Before removing the panel, it is recommended that you read the user manual for instructions on how to open the security strip. Sometimes it is attached to rotary hooks or moved to the side, so before removing the filter on the Indesit washing machine, it is better to familiarize yourself with the method of removing the decorative panel.

You can remove the panel by carefully prying it off with a flat-head screwdriver or scissors. Most often the part is made of black material, so it is very easy to detect.

Filter removal technology

The drain piece is made of very thin plastic material. Therefore, before removing the filter from the Indesit washing machine, you need to carefully pry it off with a screwdriver on both sides and remove it only when it begins to move away from the hole, eliminating any force.

You can remove a standard filter from its socket by turning it a couple of turns counterclockwise. Then gently pull it towards you. Remember that no matter how the water pump works, there will still be liquid inside it. Therefore, before cleaning the filter in the Indesit washing machine, place a dry cloth under the panel that can absorb water. This simple action will eliminate the hassle of liquid leaking onto the floor surface.

How to clean the fill filter

Structurally, the inlet filter is a special mesh that can retain sand or rust present in the incoming water. Not all manufacturers install such a device on their models, but if it is present, then you need to know how to clean the filter in the Indesit washing machine. If this operation is ignored, the flow of water into the tank may stop.

The procedure for cleaning the fill filter is as follows:

Disconnect the washing machine from the power supply.
Turn off the water supply tap.
Carefully disconnect the water supply hose, which is located on the rear wall of the unit. We do this procedure carefully, trying not to lose or damage the rubber sealing gasket. First, place a container under the hose to collect any water that may leak from the hose.
Then you need to remove the filter itself from the pipe. This can be done using pliers.
Using a small brush, clean the filter mesh under running water.
If there is an additional mesh, it must also be cleaned.
After completing all operations, install the parts back.
The last step will be to install the hose in its original place. Then open the water supply tap and carry out a test run.

The frequency of cleaning the inlet filter depends on the quality of the tap water and the number of washes.

Rules for cleaning Indesit washing machines

In order for the Indesit Wiun 102 washing machine or any other model to continue to work properly, it needs to be well cared for. It involves regularly cleaning household appliances, as they tend to get dirty. Absolutely anyone can cope with this task.

Washing machine Indesit

Features of cleaning the drain filter in the machine

To clean the drain filter in the Indesit washing machine, you need to do the following:

First you need to remove the filter. It unscrews quite easily: you just need to grab the notch that is located on this part of the Indesit automatic washing machine and turn it counterclockwise.
If the part is secured with a bolt, it must be removed with a regular screwdriver.
If the part is stuck and it cannot be removed in the usual way, then you should put the washing machine on its side, unscrew the pump from it, and only after that take out the working element that needs to be cleaned.
Once dismantling is complete, the remaining water will flow out. After this, you can clean the hole where the part was located. You need to remove all debris, take out small objects that often end up in this part of the Indesit washing machine.

Method for cleaning the pump in an automatic washing machine

The rules for carrying out this procedure will help the owner of household appliances to clean the pump in the Indesit washing machine. They include the following steps:

First you need to clean the impeller. It connects the body parts of the part. To remove it, just unscrew the screws.
The unscrewed impeller, which is the most important part of the pump in an Indesit washing machine, should be carefully cleaned and all debris accumulated during washing should be removed from it.
After removing dirt, wipe the inside of the part.
Next, you can safely install the impeller in place.

After cleaning the pump, you need to check the functionality of the equipment. If the water drains normally and the Indesit washing machine itself does not make any noise, then the task was completed correctly. Otherwise, you need to call a technician to check the condition of the pump.

How to clean the fill filter

Some Indesit models have a fill filter, which, like the pump, needs to be cleaned. This device has the form of a mesh designed to filter water. You can clean the Indesit automatic washing machine, and specifically this part, in the following way:

Turn off the water.
Unscrew the inlet hose.
Use pliers to pull out the mesh.
Using a regular toothbrush, remove all dirt from the part.
Now rinse the mesh under strong water pressure.

Cleaning the drain and fill filter is not that difficult. For everything to work out correctly, you just need to strictly follow the instructions.

General cleaning of the Indesit Wiun 102 automatic washing machine from dirt

If you only clean the pump, drain hose or other part, it will not bring much benefit. Upon completion of all work, it is necessary to carry out a general rinse of the Indesit washing machine. The procedure can be carried out in the following ways:

First, you should clean the drum, inside of which dirt constantly accumulates. You don't have to make any special efforts. You just need to purchase a special cleaning agent that removes any dirt. The purchased powder should be poured into the tray. Then run the longest wash cycle, preferably at maximum temperature. After cleaning, wipe the drum with a clean sponge.
Citric acid will help to completely clean the drum along with other internal parts of the machine from dirt. You will need approximately a pack of acid for 100-200 g. It should be poured all into a special tray or directly into the drum of the device. Next, you need to select a long washing mode. During operation, the equipment must heat the water to at least 90°C.

The main stages of the work, which help you understand how to clean the Indesit washing machine from dirt, are shown in the video.

If you suddenly hear a buzzing sound during washing, you need to temporarily stop the machine. Most likely, the unusual noise was caused by a piece of scale that got into the drain. It must be removed urgently so that it does not damage the device. After this, you can safely resume the washing process.

Source: https://1stiralnaya.ru/uhod/chistka-stiralnyh-mashin-indezit

Cleaning the drain filter

More serious malfunctions of the Indesit washing machine can occur due to a clogged drain filter, which is installed in all models. The algorithm of actions is as follows:

We dismantle the plastic decorative panel at the bottom of the unit.
Remove any remaining water. For this, some models are equipped with a special hose. If this is not available, you can use available means (basin, rag).
Turning counterclockwise, unscrew the drain plug.
Remove the filter from its location.
We clean the filter device from contamination.
It is advisable to clean the connecting pipes where rust and dirt may accumulate.
After carrying out these operations, we reassemble the unit in the reverse order.

If you cannot remove the filter, you can clean the drain system through the pump. To do this, place the car on its side and remove the pump. Next, disconnect the pipes and clean them.

Methods for cleaning the filter device

Before cleaning the filter in the Indesit washing machine, you need to familiarize yourself with the recommended methods for doing this work.

There are two main methods:

The mechanical method involves removing large particles using a fine brush (or a toothbrush). It will be more productive to remove dirt and rust under running water.
The chemical method involves the use of citric acid to remove limescale and musty odor from the filter element. A better result can be obtained after soaking the part in the solution for several hours.

Also pay attention to cleaning the drain hole, where debris can also accumulate. To make it easier to detect contamination, you can illuminate it with a flashlight.

Tips for proper use of the machine

In the operating instructions for the washing machine, manufacturers try to indicate the main points of cleaning the filters. Knowing these recommendations will save you from many troubles:

Clean the filter at least once every three to four months.
Try not to leave wet items in the drum for a long time, which can lead to the growth of fungi and mold.
Use a good quality detergent, free of foreign impurities.
Be sure to disconnect the unit from the power supply during cleaning.
Avoid cleaning the filter with a coarse lint cloth.

Following these simple prevention methods will extend the trouble-free operation of your washing machine. Any housewife who treats her assistant with care is able to perform filter cleaning operations without the help of specialists.

What can I do to prevent blockages from appearing?

Blockages are not difficult to overcome, but it is easier to prevent such a situation. Moreover, natural contaminants more often cause blockages in hoses, which can be easily avoided with proper operation. You just need to follow a few basic rules for using a washing machine:

check all items loaded into the washing machine for the presence of foreign objects and hair caught in the pile;
zip up clothes and turn them inside out;
Shoes, bras and underwear decorated with metal fittings, rivets, spikes and beads should be washed in special protective bags;
use softeners if the water in the water supply is too hard;
regularly, at least once every 3-4 months, carry out a comprehensive cleaning of the machine, starting a cycle with “lemon” or another similar cleaner;
Periodically clean the debris filter and check the drum for stuck objects.

It is recommended to use only high-quality detergents suitable for the selected mode for washing, otherwise the powder will not dissolve and will settle on the walls of the hose and drum.

If you follow these simple rules, you can forget about blockages. The main thing is not to put off cleaning the drain hose for too long, otherwise the problem will worsen and it will be more difficult to “break through” a path for water.

Interesting:

Secrets of cleaning the washing machine drum
Cleaning the washing machine with soda ash
How to clean the powder tray in a washing machine
How to clean an Indesit washing machine?
Cleaning an Electrolux washing machine
Why doesn't the powder foam in the washing machine?

Reader comments

Share your opinion - leave a comment