How to clean limescale from a bathroom mirror

How to clean plaque on a bathroom mirror

The bathroom is a room with increased requirements for arrangement. High humidity and frequent temperature changes oblige you to choose interior items made from high-quality materials. Bathroom mirrors are produced by sputtering precious metal onto glass. The silver surface is moisture resistant, durable, and beautiful. The decorative item is placed in a frame made of waterproof materials: MDF, plastic, aluminum, wood coated with a special varnish. An interior replete with mirror surfaces is chosen to expand the space and make the room decorative.

About caring for mirrors

A correctly selected mirror surface installed according to standards doubles the area of ​​the room. A decorative item framed with a matching frame in the appropriate style is an elegant decoration for the bathroom. Difficult conditions in the bathroom require special care measures for mirrors. To extend service life and preserve decorativeness, the following are required:

1. regular cleaning of the reflective surface;
2. treatment with anti-fog agents;
3. ventilation of the room after completion of water procedures.

Housewives who neglect advice on caring for decorative items in the bathroom are faced with unexpected problems. Splashes of water, drops of condensation settling on the surface, after drying, lead to the appearance of limescale on the mirror. The bathroom is not at all decorated with a reflective surface with salt deposits and traces of water splashes. How to clean a bathroom mirror from plaque without damaging the surface? Folk and modern means for removing plaque can easily help solve the problem.

We return the mirror to its original shine - folk remedies

If limescale has not yet formed on the reflective surface, removing the dirt will not require much effort. Wipe the mirror with a dry cloth. This procedure helps remove a layer of dust from the surface. Cleanses salt streams and significant contaminants, returning the mirror surface to its original radiance:

• lemon juice or citric acid solution - apply it for 10 minutes, wipe the surface thoroughly with a dry cloth;
• raw potatoes - rub the mirror with half a potato, rinse with clean water, wipe dry;
• a mixture of chalk and vinegar - dissolve 1 tbsp in a glass of water. a spoonful of vinegar and chalk, heat it up, let it sit, drain the water. Chalk-vinegar sediment perfectly cleans even old stains.

How to clean a bathroom mirror so that it shines like new?

Even an expensive and high-quality decorative item installed in the bathroom fades and darkens over time. Wash the mirror surface with an alcohol-based glass cleaner. To make it shine, treat it with any of the following:

• a weak blue solution;
• ammonia;
• salt water;
• milk.

After 5 minutes, wipe the mirror dry with a soft cloth. The radiance and shine returned to him.

Getting rid of limescale

If limescale has appeared on a mirror surface, it is difficult to get rid of it using traditional methods. They cope well with the problem of acids - sulfuric and hydrochloric. The use of acids to clean mirrors is difficult due to the lack of free access. These rare, difficult-to-use products are completely replaced by publicly available acetic acid. It removes plaque from a mirror surface and restores its shine. The product does an excellent job of removing salt deposits on metal parts of bathroom fixtures. When working with vinegar, use rubber gloves. The mirror is thoroughly rubbed with gauze soaked in acid, wiped with a damp cloth, and rubbed dry with a soft cloth.

Modern strong anti-plaque agents can remove solid particles from the surface without damaging it: “Mr. Muscle”, “Silit”, “Lok”. Spraying on a reflective surface does not always achieve the expected effect due to liquid flowing down to the bottom of the canvas. To be sure to get rid of lime deposits, apply the product to a gauze pad, apply it to the problem area, and leave for 15 minutes. Remove the cloth and rinse the cleaned mirror with clean water.

Cleaning glass without streaks using folk remedies

If you are not one of the people who cannot imagine life without constant cleaning, then you prefer quick and effective cleaning, without the use of chemicals. There is no need to look for expensive organic products; you can easily make them yourself at home. By using folk cleaning products, you will ensure not only clean surfaces, but also safety for family members. In addition, you will save your budget.

So, we clean the mirrors of plaque without streaks using home remedies:

1. It may seem incredible, but a great way to clean a mirror without streaks is to use old nylon tights. If the surface is not very dirty, just wash it with cold water and then polish it.
2. The next way to prepare a homemade product for cleaning mirror surfaces is a mixture of crushed chalk (20 g), vinegar (1 tbsp) and water (1 tbsp). Leave the prepared mixture to stand until the sediment settles to the bottom, then pour the liquid into a spray bottle. If necessary, use the mirror cleaning solution as you would a regular glass cleaner.
3. Even heavy dirt on mirrors is a minor problem. Again, use 20g crushed chalk, 1 tbsp. l. ammonia and 1 tbsp. water. Mix everything, but do not stand as in the previous case. Using a soft, slightly damp cloth, use liquid to clean the mirror. Then clean it with paper and polish with a soft cloth.

Ammonia for shine

Despite the sharp, unpleasant smell of ammonia, it has an excellent degreasing effect, being an excellent way to clean a mirror from stains, saving you time and nerves when cleaning. It not only binds grease, but also eliminates yellowing from cigarette smoke, which slowly but surely settles on mirrors in smokers' homes and cleans frames.

Cleaner for weekly cleaning is prepared by mixing 8 tbsp. l. ammonia and 4 liters of warm water.

For more complex contaminations, the mixture of water and ammonia should be more concentrated (1:1). Hard-to-reach corners can be cleaned with a cotton swab. At the end of cleaning, wipe the mirror with a dry soft cloth.

Important! Please make sure that the solution of ammonia and water does not get on the wooden frame - it can ruin it.

Green tea and salt for shine

Prepare green tea (without sugar, of course) and use it for washing. This useful liquid removes stains and provides a pleasant, shiny mirror appearance. You can increase the effectiveness by adding 1 tbsp. tea 1 tbsp. l. salt.

Potatoes for wash and shine

The next way to wash a mirror until it shines without leaving streaks is to use raw potatoes. Cut the potato, rub the surface with the cut, cutting it off periodically until the potato is completely clean. Then rinse the mirror with clean water, polish with paper or cloth or microfiber.

Milk for shine

The next option to wash your mirror without streaks to a perfect shine is milk. Soak a cloth in it, wipe the glass with it, and polish it.

Blue for shine

This previously popular product returns a mirror shine, removes dirt and various stains. Prepare the solution according to the instructions on the package and wipe the glass.

Alcohol from hairspray

To avoid streaks from hairspray on the mirror, apply a little alcohol to the surface and wipe with a microfiber cloth or paper.

Hairspray can also be easily wiped off with the following mixture:

• 200 ml vinegar;
• 200 ml alcohol;
• 1 tbsp. l. starch;
• 400 ml warm water.

Pour the mixture into a spray bottle, use it like a regular glass cleaner, and then polish the surface.

Onion from insect traces

Stains that flies leave on mirrors with enviable regularity can be removed with a cloth soaked in vinegar. Another option is to use onions cut into halves. Just wipe the surface with the onion, leave it for 10 minutes, then wash the mirror with water and polish.

Vinegar for limescale

Vinegar is not only a good helper in the kitchen, but also a universal cleaner. This pure, natural product is a good way to clean your mirror without streaks. It acts against the most severe stains, degreases, returns ideal shine to the surface, and gets rid of limescale. Vinegar is suitable for cleaning not only mirrors, windows, but also the walls of the shower stall, which are most often covered with a whitish-gray coating.

Order mirrors from us

If the mirror is made of high-quality material, then caring for it is not difficult. Order a piece of furniture for your bathroom from the Orange Sun framing workshop. Our company's specialists produce mirrors to suit every taste. Source materials: silver-plated mirror cloth, frames made of high-quality waterproof MDF. Elegant items made by experienced craftsmen of the company serve as decoration for interiors of any style and style. Call the workshop, let's choose the best mirror for the bathroom together! Phones +7

And
+7 (473) 300-33-10
.

How to clean a bathroom mirror until it’s shiny and streak-free using affordable home remedies

Even the most magnificent interior, created with love, loses all its appeal if the mirrors are not given due attention. The sight of an unkempt, cloudy mirror with streaks can negate all efforts to decorate and furnish the room. Regular and proper care of this piece of furniture is especially important in the bathroom, where high humidity does not have the most favorable effect on the mirror surface. We will share little secrets on how to clean a bathroom mirror using improvised means and return it to its former shine, as well as protect it from the negative effects of moisture.

How to protect a mirror from excess moisture ↑

High humidity poses a rather serious danger to the mirror. It may fade. Therefore, when choosing a place for it in the bathroom, you should take care of maximum protection from moisture. For this purpose, a mixture consisting of turpentine and melted wax (2/3 and 1/3, respectively) is applied to the amalgam (the back surface of the glass).

The destruction of the amalgam layer begins from the edges. To prevent it from falling off, the mirror is covered along the contour with plastic tape. This protection option is very simple, but it will significantly extend the life of the mirror. You can paint the back of the product with oil paint. This is also quite an effective method.

How to protect your bathroom mirror from moisture

To clean a mirror, many people prefer to use proven methods - household chemicals.

In any store you can find a huge selection of cleaning products that will help you deal with the most difficult stains without leaving any streaks.

It is important to pay special attention to their composition. It is recommended to give preference to products that contain alcohol, but do not contain ammonia. It is believed that they are of the highest quality and cope better with divorces.

But far from all the products presented on store shelves are as effective as they say in advertising.

In addition, specialized formulations are quite expensive, and then folk remedies, which our grandmothers told us about, come to the rescue.

The main ones include the following methods.

1. Wash mirrors with plain water and then wipe with newspaper. The thing is that paper absorbs liquid perfectly. This method is one of the most budget-friendly, simple, but at the same time effective. It is perfect for dealing with simple stains. To achieve perfect cleanliness, you first need to use a damp cloth to wash off the dirt and dust, and then take the crumpled newspaper and polish the mirror in a circular motion. In this case, you will have to put in a considerable amount of effort.
2. You can clean the mirror with a mixture of water and vinegar, diluted in equal proportions. You can use paper or napkins.
3. Grease stains or traces of cosmetic products can be removed with vodka, which is used to treat the mirror. After which the mirror surface is wiped dry.
4. In case of severe contamination, for example, after repair work, you can try using a mixture that contains vinegar (10 ml), warm water (200 ml) and tooth powder (1 spoon). Apply the resulting slurry to the mirror for about 2 minutes, after pouring out the excess liquid. Clean the surface of the mirror using newspaper.
5. To clean the mirror without streaks, it is also recommended to use alcohol colognes, which cope well with various stains, even the most severe ones.

To prevent your bathroom mirror from fogging, you can use the following methods:

1. Install the fan into the existing exhaust system. Using this device you can regulate air circulation. This will help normalize the humidity in the room. You just need to turn on the fan as needed.
2. Instead of a bathtub, install a shower stall - this method is more expensive. A shower stall will help isolate steam, which will normalize the air humidity in the bathroom.
3. You can get rid of fogging by installing a special device for heating the mirror surface. The device operates from the mains.
4. Use traditional methods.

The easiest way to get rid of stains when washing glass is to use folk recipes. Among them there are many inexpensive ones, for example, you can use shampoo to wash your hair. To do this, wash the mirror thoroughly and wipe it dry. Apply a few drops of shampoo to a dry cotton cloth and wipe the glass surface with it until the streaks disappear. The shampoo will create a protective layer that will last 2-3 weeks.

To prevent your bathroom mirror from sweating, you can use laundry soap. First you need to wash the surface and then rub soap over it. After this, wipe the glass dry using a suede cloth. The soap will create a protective layer that prevents steam from forming.

Another idea is shaving cream or foam. Apply it to the mirror and immediately wipe the surface with a paper towel. Vinegar can be found in almost every home. It is also able to get rid of condensation on a mirror surface. You can use it in different ways:

• Mix 1 cup vinegar and 1 cup water. Pour the prepared solution into a spray bottle. During the next cleaning, treat the mirror with this composition and wipe it dry with a cotton napkin.
• Add 5 tbsp to 0.5 liters of water. l. vinegar. Moisten a cotton napkin with the prepared solution and wipe the glass with it.

We suggest you familiarize yourself with Softening leather shoes without harming them

So, there are several popular ways to combat stains when washing mirrors.

1. Brew strong tea, add a glass of water and a teaspoon of salt. Wipe the mirror with nylon tights. After such cleaning there will not be a single stain left on the mirror.
2. Mix ammonia with a tablespoon of honey. This mixture will help you clean the mirror until it shines.
3. Use raw potatoes, which must be cut into 2 halves and begin to process the surface of the mirror. Wait 5 minutes and rinse off the potato juice with cold water. Wipe the mirror dry with a napkin.
4. Take an onion, cut it into 2 halves and rub it on the mirror, wait 5 minutes. Then wipe the mirror with paper or a napkin. Using a bow, you can achieve the desired shine and smoothness from a mirror surface.
5. Use turpentine and melted wax. This option is suitable in cases where the temperature and humidity levels often change in the room in which the mirror is located.

Of course, these are not all the ways to clean a mirror, but they are the most popular and in demand among housewives.

1. Old newspapers and water.

Old newspapers and water are a good way to clean mirror surfaces. First you need to wash it with soapy water or any other cleaning agent, after rinsing the surface with warm water.

It’s important to know: few people probably knew about using warm water, but it can give the mirror a particularly shiny look. Warm water is a great way to add shine to a mirror.

After this procedure, you need to wipe the mirror with newspaper (it can also be replaced with toilet paper). But remember that newspaper ink contains large amounts of lead, so they should be used with extreme caution.

2. Tea and salt water.

Through the use of tea and salt water, you can create a mirror

shine, which is obtained by using special detergents and cleaning products. To do this, you need to brew strong green leaf tea, let it brew for about half an hour and add a teaspoon of salt (do not overdo it with the latter, as salt stains may remain). Polishing is best done using microfiber.

3. A mixture of acetic acid and tooth powder.

To clean a mirror, following this advice, you need to mix 25 g of tooth powder well in 50 ml of food vinegar. Let the mixture brew for a quarter of an hour, then strain the solution. The product is ready for use - you need to moisten a soft cloth in it and thoroughly wash the mirror surface.

4. Ammonia water and chalk.

A very simple and affordable method - after all, every home medicine cabinet contains ammonia (or an aqueous solution of ammonia). To obtain a mixture for washing mirrors, you need to combine ammonia and chalk in equal parts. Then rub the surface with this mixture using a cotton cloth. Rinse with cold water and wipe dry with a sponge.

5. Potato tubers.

This important food product is an excellent way to clean mirror surfaces from traces of dirt and stains. To add shine to the mirror, you need to cut a raw potato in half and rub the surface with half. After this, rinse it with water at room temperature and rub it with a dry microfiber cloth.

6. Raw onion.

Onions are not only a vegetable grown in a garden garden; recently they have been widely used as a household helper. It is one of the most effective folk methods to help get rid of insect traces on mirror surfaces. To do this, grate them with half an onion and leave for a quarter of an hour. To prevent an unpleasant odor from lingering in the room, you need to thoroughly rinse the mirror with cool water and wipe dry with a soft cloth.

If you think about it, there is nothing difficult in the process of washing a mirror, for example, in the living room. The whole difficulty lies in the final stage of cleaning, this is rubbing until transparent and shiny.

Cleaning the bathroom can be the most difficult. Very often, soap splatters are simply rubbed off with a rag instead of leaving a clean strip behind it.

What else could be the reason behind the appearance of marks after washing? If you know your enemies by sight, then it will be much easier to fight them.

1. An unwashed surface will certainly cause stains. The slightest droplets of grease or dust will lead to the appearance of marks after cleaning.
2. If you use ordinary tap water for washing, it can also cause poor cleaning of the mirror. For this purpose, it is better to use clean filtered water.
3. A low-quality stain remover, washing away traces of dirt, also often causes a number of problems. Therefore, if this is a purchased detergent composition, its choice should be taken seriously.
4. Excessive application of liquid to wash such surfaces also often leads to the formation of drips and streaks.
5. Ideally, mirrors should be washed with a special glass brush, but many housewives still adhere to the usual cleaning tool - a cloth or paper. In this case, it is necessary to choose the right material so that no marks or lint remain.

We suggest you familiarize yourself with How to clean a stainless steel kettle: folk remedies

Now it will be much easier to avoid this annoying problem.

But you should also prepare for cleaning wisely. How to wash a mirror, and what is needed for this? It all depends on the nature and degree of its contamination.

The choice of a product for cleaning a mirror surface depends not only on its effectiveness, but also on the personal preferences of the owner. Which chemical should be used depends on many factors, for example, the presence of small children in the house, whether any family members have allergic reactions, and others. An excellent alternative to store-bought drugs are traditional methods. Below we will tell you in more detail about each of the options.

Removing dirt

How to avoid fogging up your bathroom mirror ↑

Perhaps the problem of fogging mirrors in the bathroom is familiar to everyone. This happens because the humidity and temperature in the room rise sharply while using a bath or shower, and steam, settling on a cold mirror surface, turns into condensation. Drying water droplets mix with settling dust, leaving unsightly streaks.

It is believed that fogging of a bathroom mirror can be avoided by wiping it with glycerin. You may also need shaving cream, which is applied in a thin film to the surface and polished with a soft cloth. You can combat the problem using the following composition: 1 tsp per 100 ml of water. gelatin. This mixture should be applied to the surface of the mirror.

Another very simple way: you need to moisten a flannel cloth with shampoo and wipe the mirror, then wipe it dry. Anti-fog for car windows is an equally effective solution to the problem.

As you can see, it doesn’t take much effort or time to make the mirror clean, shine and shine. Any housewife can take care of this important part of the interior. The main thing is to do this regularly. It is better to wipe off water and other contaminants that have reached the surface immediately, without waiting for it to dry, and then the process of “general” cleaning in the bathroom will not be too tedious.

Additional ways to clean your bathroom mirror

Method 1

There are many commercial mirror cleaners on the market, but sometimes such products do not produce the desired results. Moreover, very old mirrors that have lost their shine may become even more dull. To bring this mirror to life, make a homemade cleaning solution that includes water and vinegar.

• Mix 2 parts water and 1 part vinegar, pour into a spray bottle and shake well;
• Clean the mirror from dust with a dry cloth and spray the vinegar mixture onto the surface of the mirror;
• Rub the mirror surface with circular movements to remove all stains, then wipe with vertical, and finally horizontal;
• Wipe the mirror with crumpled newspaper, periodically replacing it with dry newspaper, removing all moisture. Newspaper is ideal for these purposes, as it does not leave lint or streaks;

We suggest you read How to clean a jacket from greasy conditions at home

You need to rub the newspaper vigorously so that with its help the moisture disappears. Since if it dries on its own, streaks and stains are possible.

Method 2

An effective means for degreasing and cleaning mirrors is ammonia.

• Thoroughly dilute ammonia in water in a ratio of 1/5;
• Using a dry cloth, apply it to the mirror;
• Dry with crumpled newspaper.

Recently, many have become disillusioned with using newspaper, since the ink is no longer the same and can smear on the mirror. Therefore, first find out about their durability on a small area of ​​the mirror. If there are problems, replace the newspaper with microfiber cloths, which are ideal for mirror and glass surfaces, as they clean them well and do not create lint or streaks.

Basic cleaning steps

Cleaning reflective surfaces consists of three stages: removing dust and large stains, getting rid of streaks and obtaining shine.

Preparing the mirror for cleaning

Depending on the condition and area of ​​contamination, different cleaning options are used.

If the surface is wet, remove all water first. A paper towel, lint-free cloth or microfiber is suitable for this.

For large stains, apply the cleaner and allow it to thoroughly absorb the stains. If this doesn't help, try gently scraping them off with a razor blade or sharp knife.

Cleaning the mirror surface

After removing the main contaminants, remove any remaining detergent and dirt, as well as stains.

To do this, rinse the mirror with clean water and wipe with a damp sponge or microfiber. To get the best result, use boiled and settled liquid. Don't forget to rinse the sponge periodically.

Removing liquid and adding shine

After removing the remaining household chemicals, remove moisture from the surface using microfiber. Then treat the mirror with special compounds to obtain shine.

How to prevent dirt and keep your mirror clean

To clean mirrors as rarely as possible, you need to understand the reasons for the appearance of dirt:

• high humidity;
• dust, dirt and condensation;
• incorrect installation location;
• improper cleaning;
• hygiene and cosmetic procedures near the mirror.

Some problems can be eliminated, some can be minimized, and the rest will have to be dealt with.

Moisture protection

High humidity causes fading and reduced reflectivity. On the back surface of the mirror there is a special layer of aluminum, silver or a metal alloy - amalgam. This layer can collapse and crumble when exposed to moisture. To prevent this from happening, coat the amalgam with a moisture-resistant compound.

Protection against dust, dirt and condensation

Unfortunately, it is impossible to create absolute protection. It is recommended to regularly wipe the mirror with a soft cloth and a weak vinegar solution. Sometimes additional surface heating is installed.

Correct installation

Exposure to direct sunlight will sooner or later cause the mirror to fade. The installation location should be chosen so that natural light falls on the person in front of the mirror.

Excessive exposure to high temperatures also causes clouding. Do not place the mirror in close proximity to hot water pipes, boilers or heating radiators. The structure should hang evenly and as tightly as possible to the wall, and all cracks should be reliably sealed.

How to get rid of divorces

Any water contains various impurities and salts, which create stains on the mirror. For any procedures, use boiled and settled liquid.

Avoid regular lint cloths, napkins and paper. When wet, the separated particles will stick to the mirror. Microfiber, thick paper towels, newspapers or nylon cloth are best suited for cleaning.

How to clean a bathroom mirror

When cleaning, you can use commercial chemical cleaning products or homemade ones you prepare yourself. Before using them, it is important to prepare the glass and wash it with a sponge soaked in soapy water. Remove residues and stains with a microfiber cloth.

Chemicals

To clean a mirror from limescale, choose liquid substances that will not damage the surface of the glass.

For light contamination, it is enough to apply the product for 2-3 minutes to remove water stone. For more complex stains, it will take 10-15 minutes. But these are general rules. To avoid mistakes, read the instructions for the product. It should tell in detail about the method of cleaning the bathroom mirror from limescale and the time of action of the chemical.

The most well-known and effective glass cleaners are produced under the following brands:

• Alcohol-based Cif
• Cillit with oxalic acid, created specifically for removing water scale on any surface;
• Clin with isopropyl alcohol;
• Mr Muscle with ammonia;
• Frosch Glass Cleaner contains only natural ingredients;
• Eco-spray Organic People contains essential oils;
• Spectrum-Profi is based on isopropyl alcohol with an antistatic effect.

Among household chemicals, any fabric softener, which is added in small quantities to the water for washing the mirror, will help cope with dirt and limescale.

A dishwasher detergent designed for glass food products will help you clean your mirror with a 100% guarantee. Car cleaner will also work.

Use rubber gloves to wash surfaces with acids and household chemicals. This will help prevent damage to the skin and maintain its attractiveness. All work must be carried out in a well-ventilated area or artificial ventilation must be created using a hood. If you adhere to this condition, you can prevent poisoning by chemical compounds.

Before cleaning the mirror, you should read the instructions for use and the expiration date of the product. Unsuitable or expired detergent will not help clean the mirror and will lead to defects.

Folk remedies

You can wipe off water stone from a mirror surface by preparing one of the following compositions:

• With acetic acid. Mix 5 ml of vinegar essence with boiled warm water. Using a soft sponge or cloth, apply the product to the mirror and rinse off after 10-15 minutes with running water.
• With ammonia. Mix 200 ml of warm water and 2 tbsp. l. 10% ammonia solution. Apply for half an hour to the areas that need to be cleaned. Ammonia can be replaced with regular vodka or other alcohol-containing products, such as cologne.
• With citric acid. Dissolve a packet of powder in 200-250 ml of water, about 15-20 g. Apply to a mirror surface for 15 minutes. You can replace citric acid with citrus fruit juice.
• With baking soda. 5 tbsp. l. pour soda with a small amount of water until a paste forms. Apply the product to the mirror for 20-30 minutes. However, you should be careful when using this method, as particles of soda can scratch the surface, which will lead to damage to the mirror.
• With potatoes . Rub the glass with peeled vegetables and rinse it.
• With vinegar and chalk. Dilute 1 tbsp in warm water. l. vinegar and chalk. Stir thoroughly and set aside. Drain the liquid and use the lime to clean the mirror. Remove the solution with purified water.
• With starch. Dilute 20 g of powder in 1 liter of boiled water. Wash the glass with the resulting composition using a foam cloth. No additional polishing is required.

Folk recipes will help out when you don’t have suitable household chemicals at hand. They are easy to prepare and use.

How to clean a mirror to avoid streaks

To properly care for the surface of the mirror, you need to regularly clean it with a soft cloth and use a fiber-free cloth cloth soaked in a vinegar solution at least 2 times a month. Nylon soaked in cold water also helps to quickly clean the mirror.

Foggy mirror

It is not recommended to use automobile fluids due to the extensive content of chemical elements in their composition that cause dizziness and headaches.

Removing dirt

Before cleaning the mirror, you need to remove grease and dust from the surface. It is important to use a sponge and regular cleaning product. It is strictly forbidden to splash liquid on the mirror - in this case, streaks cannot be avoided. Classic dishwashing detergent or regular shampoo are perfect.

Contamination is removed as follows:

• the sponge is moistened with water, a dish cleaning agent is applied and foamed;
• the mirror is wiped with the back of the sponge (do not use abrasive elements - they can damage the glass);
• The detergent is removed with the same sponge or microfiber cloth.

If there are dried drops of grease or any other stubborn dirt left on the glass, it can be carefully removed using a sharp razor blade or knife. After the operation, the surface must be wiped with a soft cloth. If there is extensive contamination, dishwashing powder or paste is ideal. The product is applied to a sponge and moistened until a paste consistency is formed.

Vodka also has good cleaning properties, which can be added to the ammonia solution in the proportions of 2 tablespoons per glass of solution.

We invite you to read What kind of white insects appear in the bathroom and toilet: expert answers

After removing dirt residues from the surface of the glass, it is necessary to apply clean water to it. Ideally, boiled water is used, which is applied to a soft sponge or cloth.

Creating glitter

Paper or microfiber cloth is best suited for this operation. The paper will help remove stains from the mirror and, unlike textile fabrics, will not leave fibers and collected dust on the glass. It is also possible to use newspapers - such paper is ideally soft for cleaning and absorbs excess liquid without disintegrating the fibers.

Before using paper, it is important to moisten the glass with a special cleaning agent. You can purchase them at any store in the form of a container with a built-in sprayer. The product is applied to the mirror and wiped with a wad of paper or a cloth. After this operation there will be no streaks left.

How to make a mirror shine

After cleaning the mirror surface, you can polish it using strong tea : 1 tbsp. l. Pour boiling water over the tea leaves and leave for half an hour. Add 5 g of salt, stir thoroughly. Polish the mirror with a microfiber cloth soaked in the resulting mixture.

Glycerin , a weak solution of bluing or milk will help to cope with stains : apply to the glass and rub with a cloth.

The shine of the glass will help return linseed oil . Rub the surface with a woolen cloth until the greasy layer is removed.

You can polish the surface until it shines with a peeled onion : rub and leave for 10 minutes. Rinse with water. This method helps to add shine to the mirror and prevent insects from settling.

An effective remedy against stains is ammonia . Dilute in water in a ratio of 1:5 and spray on a mirror surface. Wipe the glass until it shines with a cotton or microfiber cloth.

You can wash a mirror without streaks if, at the final stage of cleaning, you polish the surface with damp nylon tights, newspaper or a special napkin for cleaning office equipment. The latter are impregnated with an antistatic agent, which prevents dust from settling on the surface.

Traditional mirror cleaning products

Before the procedure, a logical question arises - how to wash a mirror without streaks?

Stains on the mirror

Classic glass cleaning products contain many chemical elements that can damage the glass structure, so they can be replaced with the following traditional products:

• Black tea;
• warm water with added blue;
• alcohol diluted in water.

Onions are great for stubborn stains. To clean, you need to wipe the surface with an onion, rinse it with hot water and wipe with a soft and dry cloth. You can also use a solution of vinegar and chalk. To do this, you need to dilute vinegar and chalk in 500 ml of hot water in proportions of 1 to 1 . Let the liquid sit a little and wipe the mirror with a soft cloth.

Prevention of plaque

The source of limescale is hard water. You can prevent its formation on the glass surface by eliminating splashes. To do this, place the mirror away from the shower or bathtub. After each shower, remove liquid from the glass with a dry cloth.

It is better to care for the surface using clean boiled or settled water. High temperatures will help get rid of excess salts in the liquid.

To purify and soften water, you can install special filters at home. Then limestone will appear much less frequently.

How to clean a mirror from limescale

To select a detergent, first determine the cause of the stains and dirt. There can be many such sources:

• If it is located in the kitchen or in close proximity to the kitchen, the coating is predominantly greasy (from greasy fumes or soot).
• In the bathroom and shower room it is chalky or soapy (from water or splashes when washing).
• There is a dusty coating in the halls and hallway, creating a dull reflection effect.

In addition, traces of human sweat, lipstick, hairspray, and traces of flies may remain on the surface.

Streaks and stains leave:

• low-quality detergents;
• microimpurities of water;
• fabric or sponge material.