Solutions in ampoules for injection

Quite often a person finds himself in a situation where he needs to get an injection. There are never any difficulties when going to a specialized medical institution to carry out this manipulation. An experienced healthcare professional will know how to open the ampoule, mix the solution with the medicinal powder, and prepare the syringe. However, many people are accustomed to self-treatment and prefer to administer injections at home, with the help of relatives.

If you are one of the patients who do not want to visit medical institutions to receive the next dose of medicine, then you probably have a question about how to open an ampoule of medicine yourself. Also, some cosmetic preparations are produced in glass vials, for example, ampoules for hair, vitamin preparations for the skin. Many women already easily carry out a number of manipulations and quickly get to the contents of a glass container. There are several ways to properly open an ampoule. By following the instructions, you can easily complete this maneuver. Let's look at several methods in detail.

First method: using a file

Typically, glass containers with medicinal or cosmetic preparations are sold in a package with a special file. Using it, you can easily get to the contents of the ampoule.

Hold the medicine in one hand. With the fingers of your other hand, firmly grasp the file and make several back-and-forth movements with the tool along the narrowest part of the glass container.

After this, you need to take a paper napkin or scrap fabric and wrap it around the top of the glass. With a sharp but careful movement away from you, break the glass and open the package.

How to open a glass ampoule with a dot

Quite often a person finds himself in a situation where he needs to get an injection. There are never any difficulties when going to a specialized medical institution to carry out this manipulation. An experienced healthcare professional will know how to open the ampoule, mix the solution with the medicinal powder, and prepare the syringe. However, many people are accustomed to self-treatment and prefer to administer injections at home, with the help of relatives.

If you are one of the patients who do not want to visit medical institutions to receive the next dose of medicine, then you probably have a question about how to open an ampoule of medicine yourself. Also, some cosmetic preparations are produced in glass vials, for example, ampoules for hair, vitamin preparations for the skin.

Many women already easily carry out a number of manipulations and quickly get to the contents of a glass container.

Second method: using improvised means

Sometimes situations arise when the file for opening medicines is lost or was initially missing. What to do in this situation? How to open an injection ampoule without a file? In this case, you can use improvised means, for example, a knife or a nail file.

Similar to the first method, take an ampoule and, using the selected tool, make several cuts on its neck in a narrow place. After this, open the drug, having previously wrapped the glass with a napkin.

It should be noted that a nail file is a more effective tool for opening glass ampoules than a knife. However, it is worth considering that the material must be glass or metal. Paper nail files will be powerless in this situation.

How to open the ampoule correctly and give injections?

During the coronavirus pandemic, you begin to rely not on doctors, but on yourself. Especially in the case when the local doctor or ambulance cannot come and examine the patient due to workload. But besides Covid, there are many other diseases, the control of which has not been canceled.

Online, residents of the republic share tips and proven information on how to properly apply bandages, open ampoules and give injections. Alas, even this, during the coronavirus pandemic, has to be done at home without the necessary knowledge. But people do not despair.

The presenter of the TV channel “Russia.Buryatia” Bairma Radnaeva faced the following problem:

“There are no places in hospitals. Mom is getting worse. How to open an ampoule? In reality, we are on a desert island.”

Facebook users write in the comments:

“Rub the edge of a porcelain mug and break it with a towel”

“Use a nail file to file and it breaks easily.”

The recommendations are correct. It is necessary to make a cut with some object, the edges of which are covered with abrasive material. A nail file or the edge of a mug will do just fine. Then, with a sharp movement - be sure to wear a towel to avoid injury - break off the upper part of the ampoule. The cut area must be wiped with alcohol or another antiseptic to prevent microorganisms from entering the preparation.

What to do if you need to give an injection. In this case, there are several simple recommendations. But in the future you can be sure that you will be able to give the injection correctly.

Warm the medicine first if it is cold. Hands and the syringe needle must be treated with an antiseptic. Turn the syringe upside down with the needle and release a drop of medicine to release the air.

On the buttock of the person to whom you will inject, mentally draw a large cross dividing it into 4 parts. Inject into the upper outer part, so you will definitely not hit the nerve. Wipe the area where you will inject the medicine with an antiseptic, moving from the center to the periphery. Place the needle at a 90° angle to the skin (note: this applies to intramuscular injections only).

In one firm, quick motion, insert the needle into the buttock. About 1/3 of the needle should remain outside. Introduce the medicine slowly, this will make the “patient” more comfortable. Make sure that the syringe does not twitch. You can hold it with one hand and press the piston with the other.

Apply an alcohol pad to the skin near the injection site. In one motion, pull out the needle and press the wound with a napkin. That's it, you can breathe out, you did it.

Tags: medicine

How to open ampoules with a dot?

Recently, more and more often, manufacturers of medicinal injections are producing packaging that does not require preliminary filing. Information about this is usually not indicated on the packaging. How do you know that an ampoule can be opened without a file?

This type of glass container has a point in a wide area of ​​the neck. It can be red, green or black. Also, this type of injection has a rim of the corresponding color in a narrow place of the neck. This is why it is necessary to break the packaging.

Take the ampoule with the dot in your hand. Cover the top of the glass with your other hand (don't forget the napkin). Make a sharp movement away from you and open the medicine.

How to quickly open an ampoule of medicine?

To give an injection or extract a cosmetic product, you must first open the ampoule. And difficulties may arise already at this stage. To avoid them, learn the important rules of such a seemingly simple manipulation.

How to open ampoules correctly?

How to quickly and correctly open an ampoule of medicine? If the drug is imported, then most likely you will have in your hands a container with a dot or a mark, and such a mark is applied in the thinnest part of the glass.

That is, it is in this place that the break needs to be made. First, it is better to wipe the ampoule with alcohol, then wrap it in a paper napkin or disk, and only then break off the upper narrow part in one sharp movement.

You can then use the content.

If there is no mark on the ampoule, but the kit includes a special file intended for opening, then you need to use it.

Take the container in one hand (preferably the left if the right is the working one), and control the nail file with the other hand. Begin filing the glass with confident movements.

As soon as you see a clear notch formed during the sawing process, you can open the container. For this, also use a napkin or cotton pad.

If you are using a serum or other cosmetic product, then there may not be any notches or files included in the kit. But you can completely do without marks and additional devices, using improvised materials.

So, it is most convenient to use a nail file, but it should be metal and thin. If you don't have one, use a pocket knife or small kitchen knife, but be very careful not to cut yourself.

And before manipulation, any of the items must be disinfected!

How to store an opened ampoule?

How long can an open ampoule be stored? It all depends on its content.

Thus, complex multi-component medications, as a rule, cannot be stored, so it is best to select a suitable volume and use it completely at one time, since it is unlikely to be possible to ensure tightness and sterility.

And some substances are destroyed or change properties and structure when interacting with oxygen. And if you use an unsterile, expired or altered drug, you can not only negate its effectiveness, but also cause harm to health or even pose a threat to life.

If you use a cosmetic product or use the drug not for injection, but for other purposes, for example, for oral administration, adding to cosmetics or making masks for the face and body, then storage is allowed, but it has several rules.

• First, close the container. To do this, the hole can be sealed with a plaster or tape, but you should not cover it with cotton wool, as lint may get into the solution, which is undesirable.
• Secondly, it is best to put the ampoule in the refrigerator and warm it to room temperature before use.
• And thirdly, carefully read the instructions before storing. In any case, you should not use the drug after more than three days.

Tip: you can use a syringe for storage, since this container is sealed and sterile inside. Open the ampoule, draw its contents into a syringe and put it in the refrigerator. It is also better to stick a piece of paper with the date the container was opened so as not to exceed the expiration date.

Recommendations

A few recommendations to help you open the ampoule at home correctly and safely:

1. Calculate your strength and do not squeeze the ampoule very hard so as not to accidentally crush it, otherwise fragments will get inside or cut your hands.
2. It is better to carry out all manipulations with rubber gloves that will protect you from cuts. And if you use disposable ones, they will ensure sterility and prevent pathogenic microorganisms from entering the drug from your hands.
3. Before opening the ampoule, shake it or gently tap the top with your finger several times to allow the contents to flow down.
4. The direction of the fracture is important. It is better to open the ampoule away from you, and not towards you.
5. It is best to open the ampoule, that is, break off the upper part with your working hand, while the other should securely hold the container.
6. To avoid contamination due to accidental splashing of the product, as well as the spread of possible fragments, it is better to keep the ampoule over some container, table or sink, depending on where you are performing the opening.
7. Before opening, carefully examine the ampoule from all sides to find out if there is a mark on its neck. The dot or stripe may be small and unnoticeable, so it is better to be careful.
8. Hold the container securely so that its contents do not accidentally spill.

Now you can quickly open the ampoule in any conditions and save its contents.

For injections, medications are used in special ampoules that reliably protect the active substance from external influences. If its integrity is damaged, we recommend not using the drug and taking an undamaged container.

In order to have access to the medicine, you must break the integrity of the ampoule. This must be done immediately before the injection, since if you do it earlier, the medication will lose its properties. After opening, the liquid is taken out with a syringe and an injection is made.

How to properly open an ampoule with a break point

The procedure must be carried out as carefully as possible, otherwise you risk injury or accidentally spilling the medicine. Each time you open the ampoule better, but before you begin the procedure, use our tips.

Before the procedure, we recommend protecting your hands by wearing thin rubber gloves. Thanks to them, you can protect your palms and fingers from wounds and scratches. Surely you have seen more than once how doctors open an ampoule even without gloves, right? It is not surprising, because they have many years of experience.

You also need to prepare the place - it is better to do this while sitting, lay a towel or cloth on the table surface.

First of all, carefully examine the packaging in which the ampoules are located. Very often the package already contains a convenient compact nail file for opening a glass container. How to open the ampoule in this case? It's simple - take a nail file and run it several times in the narrowest place. Once the glass is thin enough, you need to break the top section. That's all, the ampoule is open and the medicine is ready for use.

How to open an ampoule with a dot? Many people mistakenly think that it needs to be sawed exactly in the place where the point is located, but this is not so. It only indicates that you can break the ampoule without using any tools.

Take a closer look at the neck of the ampoule - in the thinnest place you will see a rim, this is the place of the break.

To prevent cuts, you need to cover the top of the ampoule with a napkin or cloth. Hold the container with one hand, and with the other, grab the top and concentrate pressure on it, make a quick movement and break it off.

If there is no rim or break point on the ampoule, you will have to deal with it on your own. To remove the head, you need to take a knife or a thin metal nail file. Make several cuts in the same place. Then grab the top and quickly break it off.

Do not overestimate your strength, because if you squeeze the ampoule too hard, it will crumble right in your hands. The result is spoiled medicine and numerous cuts.

To prevent debris from hitting you, try to keep the container as far away from you as possible. You also need to remove the top in the same direction - make the break not towards you, but away from you.

That's it, the medicine is ready for use! All that remains is to draw it into a syringe and inject it.

How to open an ampoule: video

In this video you will find some useful tips on how to open different types of ampoules.

Women's online magazine Delafe.ru

Related articles:

• How to open ports for Minecraft
  Many people ask themselves this question when creating their own server. How to open ports for Minecraft? Namely…
• How to open the trunk in GTA? Scotch, so that you don’t have to worry about half of the mods, download a normal trainer: I’ll send it to you and tell you about it...
• How to open a Lenovo phone Most modern smartphones, including the ZTE Blade V8, are manufactured in the form of a solid, non-separable candy bar with a non-removable…
• How to open mp4 One of the popular video formats is MP4. Let's find out which programs can be used to play files...
• How to open a text document? The most common reason that you cannot open a word or excel document on your...

How to open an ampoule with dry powder?

In most cases, medications for injections are available in ready-made liquid form, but some drugs require preliminary preparation. In this case, you will have two ampoules that need to be opened. One of them has liquid contents. The methods described above tell you how to open such packaging.

The second glass container usually has dry bulk contents. The instructions suggest mixing these two bases. In order to get to the loose powder, you need to do the following.

Open the vial of liquid and draw the medicine into the syringe. Open the second ampoule using any sharp object: a knife, scissors or a nail file. Use a tool to hook a corner of the metal cover and carefully bend it back. Insert the syringe needle into the ampoule, piercing the rubber cap. After this, you need to mix the medicine thoroughly and draw it back into the syringe.

How to open an ampoule without a nail file

Pharmaceutical companies produce some medicines and cosmetics in glass ampoules. But if it is necessary to extract the drug from the ampoule, for most of us it becomes a huge problem, prepared by our well-wishers pharmacists.

Probably everyone has encountered such a situation. Of course, this problem can be avoided if you know exactly how to open the ampoule.

The procedure for opening an ampoule with a medicinal product

loading…

1. To begin with, as required by generally accepted rules for the use of any medicine, you need to read the name of the drug, determine the volume, and also make sure that the expiration date corresponds to the date of direct use of the medicine.
2. As a rule, along with the medicine and its instructions, there is a special nail file for opening ampoules and bottles. Before using the nail file, this ampoule must be shaken well so that all the medicine is at the bottom of the bottle.
3. Then use a nail file to “walk” around the circumference of the neck of the ampoule, gradually filing it away.
4. Using a cotton swab that has been previously soaked in alcohol, thoroughly wipe the ampoule and, pressing, break off the neck away from you. To protect yourself from cuts, it is recommended to use a napkin or cotton wool, first wrapping the neck of the ampoule before breaking off the top of the ampoule.
5. Lower the syringe with the needle into the opened ampoule, pull the piston, and draw the required volume of solution.

It is necessary to take into account the nuance that when taking the medicine, the tip of the needle may curl up as a result of its contact with the walls of the vessel (and/or its bottom). For this reason, the needle may become dull. Thus, it is considered correct to use one needle to collect the drug, and the second one is taken directly for the injection itself.

Also, observing asepsis, it is recommended to use two needles. When manipulating the needle, its sterility is violated, which can cause unwanted complications after the injection. Additional individual needles can always be purchased at the pharmacy.

How to open an ampoule without a nail file?

First way

Nowadays there are often ampoules and bottles that can be opened without a special nail file. The manufacturer has provided a structure that allows you to do without it. But, as a rule, such information is not indicated on the packaging, and the nail file is not provided in the packaging, so it will be necessary to check it directly in practice.

Using a napkin or rag, press on the ampoule and break off the neck. If the attempt is unsuccessful, then the ampoule will still have to be sawed off.

Second way

Instead of a special nail file, you can use:

• Manicure file. The result obtained will be the same as from a special nail file. You need to hold the tool at an angle of 45 degrees to the neck and file. Then follow the same steps - wrap the ampoule with a napkin and, pressing on the cut site, break off the top of the ampoule.
• A kitchen knife can also be used at home for this purpose. However, the effectiveness may be less than with a nail file. In order to open the ampoule, you need to make cuts in different directions and break off the neck, protecting yourself from cuts.

Dry powder ampoule

In order to use a medicine in powder form that is intended for injection, you must first dissolve it. As a solvent, you can use various substances provided - special water, novocaine, lidocaine, etc.

Options for acceptable solvents must be indicated in the instructions for the drug itself, or the doctor must indicate it himself, depending on the specific case of use of the drug.

First, you need to draw the required amount of the specified solvent into the syringe, remove the protective metal cap from the bottle and wipe the rubber cap underneath with a cotton swab moistened with alcohol. After this, inject the contents of the syringe into the ampoule and shake the bottle thoroughly.

Turning it upside down, again draw the resulting ready-made injection into the syringe. Before administering the solution to the patient, the needle must be replaced with a new one, since the needle, for obvious reasons, could become blunt.

How to reduce air bubbles getting into the syringe

• When taking medicine, the cut of the needle should always be completely immersed in the solution, otherwise air will get into the syringe along with the medicine, which will cause those very bubbles that are sometimes so difficult to get rid of. This is the main reason why air gets into the syringe. Therefore, it is necessary to monitor the cut of the needle and immerse it completely in the medicine.
• When the liquid begins to run out in the ampoule, it will need to be placed horizontally, and the cut of the needle should be pressed as much as possible against the wall of the bottle. After such actions, the needle becomes dull and in order to reduce pain in the patient, it is advisable to change it to a new one. Separately packaged needles are sold at pharmacies.
• In a situation where bubbles do get into the syringe, they are removed by beating it. If air still remains in the syringe and enters the body as a result of an intramuscular injection, then this is not so scary, but it is advisable to avoid such cases. After the injection, air may end up in the muscle or intercellular space, or in a vessel. For this reason, the capillary vessel may die, since it will be blocked by the very air that got into it.

If the volume of air was greater, then in this case an “air infiltrate” will appear in the muscle, which is a compaction, a lump. The symptoms and consequences are the same as with normal infiltration. This is also not dangerous, but quite an unpleasant phenomenon. Still, it is better to avoid getting air into the syringe with the medicine and carry out injections according to the instructions included with the medicine.

By adhering to these seemingly simple rules, you can carry out the entire injection procedure as painlessly and safely as possible - from opening the ampoule to directly administering it to the patient.

How to break an ampoule with a dot. How to open an ampoule?

Sometimes it is necessary to give an injection at home. This may be an injection of vitamins, sedatives, or as prescribed by a doctor.

It is not always possible to go to a clinic, where they know exactly how to open the ampoule and administer the drug. There are two types of ampoules according to the opening method:

1. traditional ones, which require a notch on the neck;
2. with a point where the glass cone is broken.

First you need to determine the type of ampoule.

But how can you protect yourself from mistakes and not cause harm when injecting yourself at home? First of all, you need to open the ampoule correctly.

This is usually not written on the packaging. But a quick glance at it is enough to understand whether it is traditional or not. The dot can be black, red or another color. If it is not on the neck, then to open it you need a special nail file, which is hidden under the top lid of the package.

This file has the shape of a circle with a cut out