How to fix a button on jeans: rules for repair and replacement, installation methods

Types of buttons

To install a rivet in a denim product, first of all, it is worth determining its type and diameter. Today there are several options for accessories for such clothing. When choosing it, you should take into account the size of the existing loop.

Buttons are different. It all depends on the type of fastening and the stud on which the button stands. The optimal solution for everyday wear is a button with an aluminum shank. This metal is durable and resistant. It is much easier to work with than steel products.

With round cut

A common option is buttons, complemented by a round notch.

All metal with smooth base

Often there are all-metal buttons that have a smooth base.

Smooth metal hollow inside

Another popular option is a smooth rod. It is often left empty.

How to fix a button on jeans?

Very often the rivets on the broken rod break on jeans. Under increased load, such products simply jump off the rod. This is their disadvantage. To replace the rivet, it is necessary to remove its remains.

This can be done with a side cutter or pliers in one movement. And you already know how to put a button rivet on jeans. Here are just a few tips:

If there is no damage to the fabric, then buy a new fastener, then insert the leg of the button into the recess and attach the metal cap to it. Turn the jeans over and press the hat onto a horizontal hard surface. Hit the rod with a hammer to secure it.
If the fabric at the location of the rivet is damaged, then first apply a denim patch and completely cover the damaged area. Sew the patch by hand or by machine several times. After this, install the rivet on the leg.

Breakage or loss of a denim button is not a reason to part with your favorite item, because now you know how to install a button on jeans at home. And if you have any problems, remember that this work can be done efficiently and professionally by specialists in the workshop using special equipment, so if necessary, contact them for help!

Rivets for clothing are an inconspicuous but irreplaceable element of every item, from sheepskin coats, fur coats and jackets to underwear. Even expensive branded clothing is often equipped with low-quality fittings: clips, hooks, zippers. Very often, decorative rivets come off, and an expensive item becomes unwearable. In order not to seek help from a clothing repair shop, you need to learn how to work with a variety of sewing accessories yourself.

Installation and replacement methods

Rivets on jeans can be installed in different ways. Taking this into account, the type of fasteners is selected. The repair of such elements also differs.

On a stable leg

It is easiest to replace such fittings. This type of repair can be easily done on your own. To carry out the procedure, it is recommended to perform the following steps:

To install the button, make a hole in the denim material. For this purpose, you can use an awl or a nail. You can also use a hand punch.
Place the nail for fastening into the hole.
Hammer the so-called button head into it, just like driving an ordinary nail. You can't put in a lot of effort. Otherwise, the fittings will be damaged.

Rivets

At home, the easiest way to install a flat button without a notch. It may have a pin with a circular notch. To carry out the procedure, you should perform the following steps:

Locate and mark the location of the fastener.
Pierce the material in the installation area. It's worth doing it with a nail. You can also use an awl. An equally convenient option would be a manual punch.
Place the nail into the hole. It is recommended to do this from the inside of the product.
Attach a button cap. It should be placed on a hairpin. It is recommended to do this from the front.
The button will be placed correctly if the nail fits exactly vertically into the hole.
Press the hat. The product must lie on a flat horizontal surface. It is important that the coating is as hard as possible.
Hit the hat. This needs to be done with a hammer. It should be firmly hammered into the fastener. It is recommended to ensure that the blow is clear and has the correct direction. However, it is not recommended to do this too much. Otherwise there is a risk of damage to the product.

Buttons, which have a plastic base and do not contain a metal shell, should be installed very carefully. When hammering a stud, it is recommended to monitor the alignment. Otherwise the pin will simply split. If you don’t want to take risks, you should refuse to purchase such accessories.

On a broken leg

It will not be possible to sew on such a button. It is recommended to place it on a strong wooden surface. To do this, you should use an ordinary or tubular smooth nail. When carrying out repairs, it is recommended to maintain alignment. However, doing this is very problematic. Therefore, it is worth preparing the bolt and tube. Its length should be approximately 10 millimeters.

It is also permissible to use a socket wrench. It is recommended to hammer the rivet into the required place and carefully evaluate the quality of the installation. To do this, the product is pulled in different directions. After such manipulations it should not pop out.

On a broken leg with a hole

Repairing such fittings has certain features. It should be installed on a solid metal nail. It is advisable to choose an aluminum product. It is permissible to use a tubular metal nail. The procedure should be carried out on a flat and level surface. It is recommended to pierce the fabric with an awl and install a button. After that, hammer it onto a nail. If it has a circular notch, the procedure will be much easier.

On a double mount

The key characteristic is the flat base of fixation. It should be pierced using 2 nails, which are fragments of fittings. After this, spikes protrude from the other side. It is recommended to bend them towards each other. This will help make the task easier and achieve better results. First, use an awl to make 2 holes in the denim.

It is recommended to take into account that when installing the fittings it may become clear that the nail is too long in relation to the material. To shorten such a product, you should use pliers.

If you do not have the required skills or tools, it is recommended that you contact a professional. They will be able to install rivets quickly and accurately using special equipment. If you want to install rivets yourself, you should first study the technique of the procedure and determine the type of fittings. This will help you achieve good results.

Patch

When the entire button falls out and there is a hole in its place, you need to make a patch. A circle of smaller diameter than the width of the belt is cut out of a thick piece of leather. In the middle of the leather patch, a hole is pierced with an awl or a thin nail, a pin is threaded through it, onto which a button is then placed. The patch remains on the inside of the belt. You can grab it with threads so that it doesn’t curl up later. But this is optional.

Buttons on jeans are most often made in the form of a metal rivet. This, of course, protects such a button from quickly coming off, however, if such a rivet has come off, this sometimes becomes a real problem. Not only can you not sew such a button simply with a needle and thread, but they also often not only come off, but are literally torn out “with meat”, which, of course, also complicates the process of repairing a denim fastener.

Find out how to put a button back in place and repair the damage to your favorite trousers in this article!

What to do if there is no spare button

If you don’t want to look for a new rivet, and don’t have the means to turn to professional craftsmen, it is permissible to use an ordinary button instead of special fittings. It is recommended to ensure that it matches the style of the jeans and matches the diameter of the loop.

To carry out the procedure, you should perform the following steps:

First of all, it is recommended to remove the old rivet.
After this, the hole from it should be carefully mended. This should leave no unsightly holes.
Sew a button next to it. It is best to use fittings on a leg.

Sometimes this type of fastener is fixed much more securely and looks much more attractive compared to standard metal rivets.

Installing a button

Sewing production involves the installation of accessories using a specialized mechanism - a press. If the enterprise has small production volumes, then they use manual equipment - these are levers or impact mechanisms. Large factories use electromechanical devices.

Installing denim buttons manually requires the following tools:

awl - it pierces the fabric in the place where the fittings are supposed to be installed;
hammer;
pliers;
bolt (if the button has a through hole);
metal tubes to fix the floating leg.

It is important to remember that the workplace must be stable, and it is best if it has a wooden surface