Cleaning a computer or laptop keyboard at home

From time to time, your computer keyboard gets dirty. Food crumbs, drink drops, dust, pet hair - all this debris gets clogged between the keys and slows down the operation of the device. Those who like to drink coffee with a laptop at hand run the risk of flooding the device with sweet liquid, which is very dangerous for electronics. The device begins to “glitch”, and in especially severe cases it may even fail. To avoid troubles, you need to clean your keyboard in a timely manner. It is best to contact a service center, but if desired, you can do the cleaning yourself.

What can't you do?

It may seem that the easiest option is to wash the keyboard with water. You shouldn’t do this, because electronics are afraid of liquids. You can only rinse the keys of an already disassembled device under running water. In addition, a number of rules should be followed:

1. Do not wipe the keyboard with cloths dampened with plain water. There is a high probability of liquid droplets getting inside.
2. Do not use aggressive chemicals or abrasive powders.
3. Do not use hard brushes or sharp objects such as needles or toothpicks.
4. It is also undesirable to use terry rags - they leave fluff on the surface, which will quickly attract other debris.
5. Do not pick under the buttons too actively - there is a danger of damaging fragile elements.

Technology loves to be treated with care. Be careful and attentive when cleaning.

How to disassemble and reassemble the keyboard on a PC and laptop

To clean the germs inside the keyboard, it will have to be disassembled. This is not that difficult to do, but any disassembly requires practice. Don't expect to get it right the first time - you'll have to work a little to get it right.

To remove the button, simply gently pull it first by the top edge and then by the bottom edge. You can even use tweezers or a thin screwdriver for this. Try not to break anything, don't use too much force. To put everything back after wiping, carefully place the buttons in their grooves.

It’s better not to disassemble the laptop at all. Its buttons are too easy to break, and non-separable models are becoming more common.

Easy surface cleaning

If the device appears slightly dirty, you can clean it without disassembling it. Any user can clean the keyboard.

Turn the keyboard over and shake it gently. Tap the body. You'll be surprised how many crumbs and debris you can get out. This procedure should be carried out regularly. Just remember to disconnect the device from the computer (or turn off the power to the laptop).

If there are greasy sticky spots on the keys, proceed as follows:

1. Pour 1-2 tbsp into a saucer. l. vodka or alcohol. You can also take ammonia.
2. Dampen a cotton pad or old toothbrush.
3. Clean the keys thoroughly. Impurities will literally dissolve.

It's okay if a couple of drops of alcohol get inside; alcohol is not as dangerous for electronic parts as water. But you shouldn’t be too zealous. You can also clean your mouse and mouse pad with alcohol.

Advice! Get special wet wipes for equipment for cleaning. They are indispensable in cases where you need to quickly clean grease and dirt.

It is convenient to clean the gaps between the buttons with a special brush, or you can take a regular one for painting. The soft bristles will not scratch the elements and will effectively remove debris.

A mini keyboard vacuum cleaner helps a lot. However, not every user has such a device. Instead, you can use a regular hair dryer to dry your hair. Direct the air stream at the upside-down keyboard, paying attention to the space between the keys. Then shake. This way you can remove crumbs, hair and other debris.

Attention! Turn on only cold air. Hot will create a “bath effect”, which is extremely harmful to electronics.

How to clean your keyboard at home

The housing, keys and mechanism can be cleaned in each keyboard. However, a lot depends on how much you take it apart.

Deep disassembly (after pouring) requires much more time and precision, but it's worth it if you don't want to buy a new one (it's much easier with a computer).

The number of cosmetics used to clean computer equipment is almost as large as the number of keyboard models available on the market.

The most expensive cleaning products often cost as much as a new keyboard, so it's not worth it to buy them.

When cleaning, the most useful tools are compressed air, a stiff-bristled brush, detergent and antibacterial wipes. Additionally, you should prepare two screwdrivers and a bowl of dishwashing liquid.

Keeping it clean will not only perform better, but you will also be healthier - some buttons harbor bacteria and viruses that can be dangerous to you.

If you do not plan to disassemble, then use compressed air and a brush with stiff bristles, which effectively removes debris accumulated under the keys.

If you are going to dismantle it, you will need a screwdriver, and in order not to scratch the plastic buttons, line it with a tape slot.

Then press the tip of a screwdriver between the keys and lightly pry the key until it pops out of the guides. I use a screwdriver and use my finger as leverage.

In this way we sequentially dismantle all the keys.

Only now can you see how much dirt has accumulated under the keys. Not only are the buttons difficult to press, but they are also an ideal breeding ground for bacteria.

The best way to remove dust from your keyboard is with compressed air. You can also use a vacuum cleaner.

Use a damp cloth to thoroughly clean your keyboard and remove any remaining dirt.

In hard-to-reach spaces, use a cotton swab.

Now we move on to the most tedious part of the job - cleaning the buttons. If they are very dirty, prepare a bowl of warm water with a little dishwashing liquid and soak them for at least 30 minutes.

We invite you to familiarize yourself with Worms in Rice

After washing, wipe with a cloth and leave until completely dry. On older keyboards, exposure to sunlight over long periods of time can cause the key casing to discolor.

Unfortunately, you cannot wash yellowed buttons with any detergent. After drying, using the photo, proceed to installation.

Start with the big keys. In their case, you must place the hooks correctly in the bracket. They are used to support buttons.

At the next stage, when inserting the button, fix the direction and press firmly.

After installing everything, turn on the laptop. The unit is clean and ready for use.

When looking for alternative cleaning methods, you should look into chemical cleaners such as CyberClean.

This is a thick gel that works well as a bacterial cleanser. The effect of the gel may not be as good as removing the buttons, but CyberClean can be used for less dirty keyboards.

CyberClean is also suitable for cleaning a mobile phone, printer panels or remote control.

After purchase, it is stored in airtight packaging. Let's see how to use it and what the results are.

First, remove all coarse dirt and then take it out of the package. The substance is soft, but not sticky, so you can handle it with confidence.

Place the gel on the keyboard and press it over the entire surface, including those between the keys.

Using your fingers carefully, try to clean the top and sides of the keys.

On the surface of the gel you can see various impurities that have adhered to the cleaning substance.

If cleaning does not give satisfactory results, try to repeat the procedure until it succeeds. After cleaning, remove dirt from the gel and place it in a bag.

The standard keyboard is simpler in design. Low profile, thanks to the smaller key travel, it is much more comfortable for many people.

Such a keyboard must be cleaned slightly differently than described above for a standard one.

Removing all the buttons is difficult and risky - you can easily damage the delicate fastening mechanism.

At the beginning of dismantling, carefully remove the last right row of keys using a thin tool. Here I want to share one observation.

I have a small child. Just recently, I advised him to take up flies. A fly sat on the keyboard. He hit it with a fly swatter. The keys jumped out like cockroaches.

Due to the low travel of the keys, even the smallest crumb can cause a malfunction. This is why it is very important to carefully remove all debris from under the keys.

You can use compressed air for this. While moving the compressed gas drain tube over the keys, place the dirt towards the removed keys and then remove it.

After that, put everything back in place and wipe the entire keyboard with a damp cloth. Unlike a standard keyboard, you can easily clean the sidewalls of the buttons. Fellowes bactericidal fabric gives good results.

In the case of low-profile keyboards, you should take extra care. Their suspension mechanism is extremely delicate and can be easily damaged.

For the scissor screwdriver, prepare two flat screwdrivers and slightly lift the top of the button.

We do this until it is unlocked.

Then we take the button with our fingers and carefully lift it up, unfastening the lower mounting.

For large keys, you also need to bend the metal bracket.

It's good if the mechanism doesn't come loose. Unfortunately, very often two more elements are removed.

Scissoring requires precision and patience. Looking at the other buttons, set them back. After this operation, the mechanism should act as a hinge.

Place the wider end into the hooks and press firmly against the upper clamping mechanism to engage.

There is one more key step left - place the button on the mount and tighten it.

That's all. You can also clean the cable and contacts, but I won’t describe this process, but I’ll make a video in the near future so that you don’t accidentally perform miracles.

The train is a thin thing, like the East, it is not to be trifled with. To see it, you need to remove not the keys, but the entire keyboard.

Contacts can be cleaned with alcohol, but not diluted or isopropyl, but traditional alcohol - this will be correct.

If the keyboard is flooded, and cleaning does not solve the problem (does not work completely), then the service center can supply you with a new one.

You can do it yourself - the main thing is to find an identical one, otherwise you will not be able to cut it or deepen the installation site.

NOTE: until you get it into working condition, you can use the screen - it’s not very convenient, but tolerable. Good luck.

Any device that runs on electricity attracts dust, this is the nature of electromagnetism, and if the device is also equipped with a forced ventilation system, then dust and dirt will collect inside like bees in a hive. A laptop is just such a device.

Care and prevention in relation to a laptop comes down to timely and correct disposal of dust and stains. This is necessary not only to maintain a neat appearance, but also, most importantly, for the normal operation of the device and extending its service life.

First, figure out what kind of cleaning you need - superficial or deep:

1. Superficial cleaning involves cleaning the keys and the space between them.
2. Deep cleaning will help remove dust from the contacts so that it does not settle on the internal devices of the laptop.

We suggest you read: How to refresh weathered meat

The keyboard needs to be cleaned regularly, at least once a month. You can buy a cleaning kit in specialized stores. It includes a brush, cloth and cleaning fluid. This kit will help you clean your keyboard more thoroughly. If special liquids for wiping buttons are not on hand, use improvised means to clean the laptop keyboard.

We offer some of them:

• Diluted isopropyl alcohol.
  This is the optimal cleaning product that will help get rid of stubborn stains. Soak a soft cloth with alcohol and carefully wipe all the keys. Treat the keyboard carefully, do not overdo it with liquid so that it does not drip between the keys and onto the contacts. Important! Acetone and other aggressive substances cannot be used, as they can not only erase the paint of the keyboard, but, worst of all, melt the laptop body. Ethyl alcohol and vodka can also ruin the paint on buttons.
• Soapy water. Soak a swab or cotton swab in soapy water and carefully remove dirt from the buttons. After the procedure, be sure to wipe the keyboard with a dry cloth, since moisture is contraindicated for the device.

1. Use only special liquids, as well as lint-free wipes, which are sold in any computer stores. Users recommend high-quality computer equipment cleaning products from Defender.
2. Use special soft brushes to remove dust and dirt between the keys, and it is better to clean the buttons themselves using napkins.

Dirt and debris also collect under the keys and interfere with the normal operation of the laptop. The easiest way to get rid of debris is to turn the device over and shake out the contents.

For the same purpose you can use:

• a brush with long, hard bristles;
• hair dryer - lift the laptop and tilt it, blow cold air on the keyboard;
• household vacuum cleaner using a narrow nozzle;
• portable can of compressed air - this aerosol is sold in computer stores.

Deep cleaning with key removal

If the device is heavily soiled or damaged by liquid, it should be disassembled and thoroughly cleaned. The need to disassemble the keyboard can frighten owners who have not yet encountered this process. However, if handled properly, the procedure will not harm your equipment.

How to clean a laptop keyboard will be discussed below; it requires special care.

In the case of a personal computer, you need to disconnect the device and carefully remove all the keys. You will need a flathead screwdriver, tweezers or a regular paper clip:

1. Using a suitable tool, remove the bottom cover by turning the keyboard over.
2. Remove the film with contact tracks. This must be done extremely carefully, if possible checking the instructions for the product.
3. Remove the buttons by prying them off with a screwdriver.

It is better for beginners not to touch long and large keys. They have strong mounts that won't give way easily. Don't take risks. Apply a couple of drops of alcohol to the buttons and clean with a cotton swab.

The removed keys can be rinsed under running water or soaked in an alcohol solution for an hour. Two tablespoons of alcohol or vodka per glass of water is enough. Sticky and greasy stains will come off easily. The keyboard housing can be cleaned with a toothbrush.

The film does not require active washing, except that you can brush off the coating and wipe it with a cotton swab.

Advice! Add dish soap, shampoo, or liquid soap to a bowl of water, shake until foamy, and place on dirty keys to clean.

How to clean your PC keyboard (video)

How to clean the keyboard on a laptop if it is stained with tea, coffee or juice

If you spill liquid on your keyboard, take immediate action. You need to do the following:

• turn the laptop over with the keyboard down so that excess liquid pours out;
• wipe the surface with a dry cloth;
• remove residual moisture using a hairdryer, having previously set the “cold” mode.

Once you have administered first aid, begin cleaning the inside of the keyboard. This should be done in this order:

• Disassemble the keyboard using a screwdriver, set aside the bolts so as not to lose them.
• Remove the buttons and sealing gaskets. They can be washed with warm water. On an Acer laptop (or any other), the keys are removed from the left edge to the right.
• Remove sticky traces with an alcohol solution and gently wipe the surface with a dry cloth. Debris and dust can be “blown out” with a hairdryer or a vacuum cleaner.
• When all the parts are dry, assemble the keyboard and install it in place.

Read also: Reducer for oxygen gas cylinder

Remember that moisture can cause irreparable damage to equipment, and take action immediately after spilling tea or soda on the keyboard.

How to put the keyboard back together?

Simple advice! Take a photo of the keyboard on your mobile phone before disassembling it.

This will make the subsequent assembly process easier:

1. Lay out the records on the table in the order they should be in, this will make it much more convenient.
2. Insert the keys into the correct places.
3. Turn the device over with the buttons facing down and cover with film. The contacts must completely match the buttons, otherwise the keyboard will not work.
4. Assemble the body.
5. Connect your device to your PC.

Cleaning computer parts with disassembly is quite difficult. A mistake can cost you equipment that is disabled. If you are not confident in your abilities, do not take risks. Contact a more experienced user.

What to do if liquid is spilled on the keyboard?

There are times when equipment needs to be saved quickly, literally seconds count. Very often people eat at the computer and spill drinks on the keys.

If the user flooded the keyboard with plain water, then it will most likely be able to be restored. It is much worse if tea, coffee with sugar, soda or beer have been spilled. Sticky liquids are treacherous: their destructive effects may not appear immediately. You may decide that the danger has passed and continue using the keyboard. Then the buttons will start to stick, the contacts will oxidize, and the device will come to an end.

Therefore, it is important to dry any moisture:

1. Unplug your keyboard.
2. If disaster strikes your laptop, turn it over and remove the battery. Remember - it will be easier to restore data on the disk than to buy a new device.
3. Turn the keyboard upside down and shake vigorously so that the liquid flows out and does not penetrate deep into the case.
4. Blot any remaining liquid with a towel.

If clean water gets on the equipment, it is not necessary to disassemble it. Dry it with a hairdryer (cold air only!) and leave it for a day in a warm, dry place.

If other liquids get in, disassembly is inevitable. Follow the already known algorithm.

When the keyboard is disassembled, you will understand the scale of the disaster. Clean the dirt on the soft film as carefully as possible. Use a cotton pad and never use aggressive cleaning agents - they will only cause harm. A small amount of distilled water will help, but if you don’t have it on hand, regular water will do.

If there are too many stains that cannot be cleaned, do not scrub the electronics vigorously. Take the item to a service center for professional assistance.

Modern keyboard cleaning at home

Dust and dirt under the keys of a laptop keyboard usually accumulate over many months or even a year or two, so by simply wiping the device with a cleaning cloth, the user is unlikely to be able to remove all accumulated dirt.
To do this, you will have to remove all the buttons before cleaning, but before doing this, do not forget to photograph their location so as not to experience further difficulties with their reinstallation.

The cleaning method described above is effective only when accidental drops of spilled liquid, crumbs and dust come into contact with the input device. Cleaning a laptop keyboard after sweet tea has been spilled on it requires several other measures, which most users can also do on their own at home.

To completely remove traces of tea or coffee, the laptop's input device will have to be completely removed. But on most laptops, this device is attached to the front panel using ordinary plastic latches, so there is no need to completely disassemble the mobile computer or do any complex disassembly.

In some cases (this mainly applies to fairly old and less common models), the keyboard can be attached to the back cover of the device with screws. Usually there are no more than two. After unscrewing the fasteners, the device to be dismantled can simply be picked up with a knife or screwdriver, after which it can be easily detached from the body.

You should also use a screwdriver to lift the edges of the input device when unsnapping the fasteners. It is not recommended to do this with your hands, since the plastic of the device is quite thin - if force is applied carelessly to it, the material may crack.

Disconnecting the cable

The input device of the mobile computer is connected to the system board via a special cable. It is easy to damage, so do not yank the removed panel under any circumstances after the fasteners have been detached. The cable is secured using a special lock with latches, the type of which may vary in different laptop models.

When removing a cable, in order to open the latch that holds it, in some cases it is necessary to perform such actions as lifting the fastener or clamping the tabs. Some types of clamps use spring latches to hold the cable.

On a desktop PC, dirt getting inside the keyboard can cause only that device to malfunction without causing harm to the computer. In a laptop, the keyboard is built into the case, which means that everything that penetrates under the buttons can get inside to the electronic “stuffing”. In this case, the owner may face serious troubles - from poor ventilation, which leads to overheating and spontaneous shutdown of the PC, to failure of the electronics (motherboard, processor, etc.).

The choice of method for cleaning the laptop keyboard depends on the type and degree of contamination.

1. Dirt, greasy stains from your hands and dust on the outer surface of the keys do not interfere with the operation of the device, but they greatly spoil the appearance and are simply unhygienic. Cleaning requires a cloth and cleaning fluid.
2. Debris and dirt getting inside the keyboard can lead to individual buttons sticking or not working (not pressing through). In this case, more serious work is required to remove dirt from the device.
3. If tea, coffee or other liquid is spilled on the device, emergency measures must be taken to save the device and laptop.

It is used in the first case to remove dirt directly from the keys and in the space between them. It is advisable to clean your PC keyboard once a month. The buttons should be cleaned with a soft, lint-free cloth. The use of cotton wool for these purposes is not advisable. The space between the buttons is cleaned with a soft brush, or, in extreme cases, with cotton swabs, but you should carefully ensure that no lint remains between the keys.

It is advisable to use special cleaning compounds, such as gel, as a cleaning liquid. But you can do it with home remedies. Diluted isopropyl alcohol is suitable; it cleans plastic well, but not everyone has this substance. There is a universal remedy that everyone has. The keys can be washed perfectly and safely with ordinary soapy water.

Before cleaning the keyboard, be sure to turn off the computer and remove the battery!

The prepared napkin must be slightly moistened with the cleaning liquid so that its drops cannot get inside the keyboard and gently wipe (not wash) all the keys with it. Moisten a brush or cotton swab with soapy water, be sure to blot it with a napkin, and then clean the space between the buttons. At the end, you need to thoroughly wipe the device with a dry cloth and do not turn on the computer for 20-30 minutes.

Regular removal of dirt from the keys significantly extends the service life of the device. In addition, the need for deep cleaning will be much less likely.

If debris and dirt get under the keys, it is impossible to operate the laptop normally. In this case, you cannot do without thorough cleaning. First you should try to remove dirt without disassembling the keyboard:

• Use a long-bristled brush to clean the spaces between the keys, turning the laptop over from time to time and shaking it lightly.
• Place the laptop at an angle and blow off the keyboard with a hairdryer (cold air)
• Do the same using a portable can of compressed air.
• Use a special miniature USB vacuum cleaner.

If after these manipulations the buttons continue to stick or cannot be pressed, then you will have to disassemble and wash the keyboard. It's better to remove it from the laptop. Before attempting to remove the keyboard, you need to find out how it is secured to the laptop. In different models it is secured differently in the body.

Most often, the keyboard is secured using latches. Use a thin screwdriver to press out the latches, starting from the upper left corner. Having freed the top and sides, the keyboard is carefully pulled out of the case. This must be done very carefully so as not to damage the cable connecting it to the motherboard. Having carefully disconnected the cable, you can begin disassembly.

We suggest you familiarize yourself with How to clean a copper faucet. How to clean a chrome faucet using folk remedies

After disassembling the buttons, you can wash them with soapy water, and clean the base and contacts with a soft brush. If the contacts and rubber bands are heavily soiled, wipe them with a cloth moistened with a cleaning solution or soapy water, and then wipe them dry. Under no circumstances should they be washed.

After finishing cleaning, it is advisable to allow all parts to dry thoroughly, after which you can assemble the keyboard and install it in place.

If after the procedure some keys do not work, then there is no point in disassembling and washing the keyboard again, since, most likely, it is not a matter of dirt, but a malfunction, and it will have to be replaced.

Every laptop owner can perform preventative surface cleaning himself. You can also do complete disassembly and cleaning yourself, but it is better to entrust this work to specialists.

No matter how carefully you work with electronics, there is no escape from manifestations of human nature: someone sins by eating near a laptop, someone likes to drink aromatic coffee and eat crispy crumbly cookies. Therefore, if you do not observe computer hygiene, after a short time the question will inevitably arise: how to clean a laptop keyboard at home?

If you want to be sure that there is no dirt left in the keyboard, then do a deep cleaning. You need:

• disassemble the keyboard;
• remove the keys using a screwdriver;
• Clean rubber bands and contacts using cleaning agent and soft cloths.

If you still decide to thoroughly clean your laptop at home, use the following algorithm:

1. Take a photo of the keyboard so that when you're done, you can return everything to its original place.
2. Use a screwdriver to remove the keys. The fastening of the keyboard buttons, although simple, is very weak. Therefore, proceed carefully so as not to damage the cable.
3. Once the keys are disconnected, use a brush or a special vacuum cleaner for cleaning laptops to remove dust (a vacuum cleaner for cleaning upholstered furniture will also work).
4. Return all keys to their places.
5. If after cleaning a couple of keys do not work, and you are sure that you did everything correctly, then replace the keyboard. Most likely, it's not the dust.

One of the easiest and most cost-effective methods for quickly cleaning keys is using a vacuum cleaner. A small car vacuum cleaner with a special nozzle (tapered towards the end) is better suited for this. If you do not have such equipment, then a regular vacuum cleaner will do.

To clean your laptop keyboard as effectively as possible, you need to thoroughly vacuum each key, especially the space bar. We also recommend carefully processing the gaps between the keys, stopping at each for about 3-5 seconds.

Today in specialized stores you can find various products that make cleaning your laptop keyboard much easier. We recommend that you pay attention to a can of compressed air: it is designed for cleaning hard-to-reach areas of various equipment. Method of application: you need to spray air at an angle, this will remove dust and other dirt from inside the keyboard.

Features of cleaning a laptop keyboard

How to clean the keyboard on a laptop is worth talking about separately. The destruction of a desktop computer keyboard will not cause significant damage. Careless handling of laptop parts can lead to irreparable consequences: the hard drive, motherboard and other vital “organs” are in close proximity to the buttons.

Disassembling a laptop keyboard is quite simple. The panel with the keys is held on by special latches that are easy to unfasten. Be sure to read the instructions for your device. If the keyboard is not very dirty, this method will help clean it:

1. Using a flathead screwdriver, pry up the top fastener.
2. Pull gently towards you. If the keys are bolted from the inside, remove them.
3. Unclip all fasteners and remove the keyboard.
4. Clean with alcohol-based wet wipes or a cotton pad soaked in vodka.
5. Go over the space between the buttons with a cotton swab or brush.
6. Put the keys back in place.

Drying a laptop keyboard from spills is a little more difficult. Buttons here are the lesser of evils, since the internal board of the computer may be damaged. Try to provide first aid as quickly as possible - there will be a chance to save the equipment.

Algorithm of actions:

1. Do not hesitate to unplug your laptop without waiting for the work to complete.
2. Remove the battery.
3. Dry the keyboard with cloth or paper towels.
4. Place toilet paper between the keys - the deeper the better. The method may seem funny, but it will dry hard-to-reach areas effectively.
5. Leave the gadget upside down for a day, in the shape of a “house”.
6. Check the paper periodically. If it instantly becomes saturated with moisture and drying turns out to be ineffective, immediately contact a professional.

Remember that laptop parts can oxidize due to humidity. Before using dried equipment, take it to a service center. height=”280″[/img]

Tips for care and use

Cleaning equipment is quite difficult for the average user. To avoid having to do general cleaning, follow simple rules of care and use:

1. Try not to eat or drink while on the computer. One careless move can cause serious damage to your equipment.
2. Maintain your keyboard periodically. Take half an hour to clean it with cleaning wipes or an alcohol-soaked cotton wool. Of course, this must be done with the power off.
3. Shake out small debris regularly.
4. Wash your hands before using the computer to avoid grease stains, which accumulate on the surface and collect dirt.
5. Don't hit the keys too hard as they may become loose.

Compliance with operating rules will save the life of your computer or laptop for a long time. Handle your equipment with care, and it will become your best assistant in business.

Basic rules of care

Timely regular maintenance will extend the life of the equipment

1. Cleaning procedures are recommended to be carried out regularly once every 1–2 years. Among other factors, the rate of contamination of cooling systems is affected by their placement, which differs among different models. The keyboard of Asus, Acer, Samsunq, Lenovo, HP laptops must be cleaned annually. SONY products can do without this procedure for two years. Expensive HP and Asus models have a similar ability. Apple laptops need cleaning every 4 years.
2. In addition to the type of model, the operating conditions of the device should also be taken into account. If there are pets in the apartment, renovation work is being carried out, or you smoke while using the device, the keyboard will become dirty more often. Therefore, carry out superficial cleaning once every 1-2 weeks. Clean the keyboard with tissues or alcohol.
3. Also use a special vacuum cleaner. While working, try not to eat or drink at the computer.
4. Every time you sit down at your laptop, you should wash your hands.
5. If you haven't developed this habit, treat your keyboard with a disinfectant spray. It must be applied to a napkin and then treated with the surface.

Systematic cleaning of the keyboard will extend the life of the laptop. Of course, if you regularly use the device, it will not be possible to completely avoid contamination.