How to disassemble an electronic cigarette: step-by-step instructions. Disassembling an electronic cigarette

First, let's figure out why you need to disassemble your vape

The first reason is that the mod is flooded with liquid during use; this happens often, and if you prevent liquid from getting inside in time, nothing bad will happen.
The second reason is “the vape broke down and stopped working.” In this case, you need to have a considerable amount of knowledge in the field of electronics to understand the principles of operation of boards and microcircuits; if you do not have these, do not do it yourself and contact a specialist. Such independent analysis of a vape at home will not lead to anything good.

And finally, the third reason is that you just wanted to look at it disassembled. In this case, we also do not recommend disassembling your box mod or mech mod; it works and let it work.

If you decide to disassemble the cartridge for the smoking mixture, also known as a vaporizer, then you will not succeed. Although it all depends on the purpose, if you just look at how everything is arranged there, then yes, but if you service it, then it’s less likely, because 99% of evaporators are not designed for maintenance.

Operating principle of an electronic cigarette

Of course, not everything about modern electronic cigarettes has been fully studied, but the advantages of using them compared to regular tobacco are obvious.

First of all this:

And yet: why does a person need an electronic cigarette? Many people think about this, but it is impossible to give a definite answer in this case.

This invention was patented in Hong Kong in February 2004. Chinese scientist Hong Lik, who works in the pharmaceutical field, has invented an electronic cigarette to safely simulate smoking regular cigarettes.

The death of his father from lung cancer pushed him into this area of research and to the search for an alternative to traditional tobacco smoking.

As a result, he came up with a modern electronic cigarette, the principle of which is to generate nicotine into vapor. The electronic version does not cause harm to health, unlike tobacco products.

The whole truth about electronic cigarettes is that they are not harmful to health when consumed in moderation, help to get rid of nicotine addiction and give a lot of pleasant sensations.

Types of electronic cigarettes

Let's try to figure it out: what are electronic cigarettes and how does an electronic cigarette work? This is a gadget that may not look different from ordinary cigarettes.

Its main purpose is to get rid of tobacco smoking and replace it with a less harmful analogue.

Let's look at what types of electronic cigarettes there are depending on their parameters.

Based on their size, electronic cigarettes are divided into the following types:

Regardless of how the electronic cigarette is designed, the size, frequency of use and control method, the principle of operation of the electronic cigarette is the same for all types.

The body of the device consists of a small steam generator and a battery that ensures the operation of the entire structure. At the end of the device there is an LED that creates the illusion of smoldering tobacco. The structure of an electronic cigarette is also the same for all types.

Summing up

The characteristics of your coil will vary depending on the location of the coil to the base.
the temperature will depend on the heating area of the coil and its type.
The speed of vaporization directly depends on the resistance of the coil. If the resistance is above 1.5 Ohm, vapor will be produced slowly, reminiscent of a classic cigarette puff. With a resistance below 0.3 Ohm, steam will be produced very quickly, but the mod must also be powerful.
The service life of the spiral will depend on many indicators. But the main factors will be overheating and low supply of liquid to the evaporation chamber.
The smoking sensation depends on the location of the coil inside the clearomizer base. If it is high, then the blow to the throat will be strong, if it is low, then the blow will be softer.

Main errors and problems:

The main mistake that novice vapers encounter when winding up their first coils is incorrect calculation of the required resistance and, as a result, the coil will not work. Mods partially protect us from this error by their ability to work in a wide range of resistances.
Another problem is a short circuit that occurs when the spiral comes into contact with the metal elements of the base. This does not apply to the special metal fasteners of the spiral itself.
The taste of burnt liquid occurs when the coil itself overheats, or when the wick is poorly wetted.
Leakage occurs when the wick is installed incorrectly or the type of coil for a given clearomizer is not selected correctly. Although a leak can also occur if the clear itself is not tightened properly.

If you take all these factors into account, your coil will delight you with high-quality and tasty vapor. It is best to buy wire for spirals and special tools in specialized stores or an online store such as. There they will help you with your choice and share the secrets of vaping.

Types of electronic vaporizers

The most important element that is part of an electronic cigarette is the electronic evaporator.

It is very important to choose this element correctly so that the entire mechanism works efficiently and evaporation is more noticeable. Currently, the following types of evaporators can be distinguished:

Non-replaceable

Due to the fact that such evaporators have practically no advantages that could distinguish them from other types, their use is a thing of the past.

Replaceable

There is no doubt that such a steam generator is much better than its non-replaceable predecessors. Replacement evaporators for electronic cigarettes are the most convenient during their operation.

"Genesis"

At this point in time, this is the most modern type of vaporizer for electronic cigarettes. Its peculiarity is the presence of a wick, the material for which is oxidized steel. The liquid is supplied to the heating element using a metal mesh.

Currently, most smokers choose Genesis. This is explained by a number of advantages that atomizers of electronic cigarettes of this type have:

But still, the most important advantage of “genesis” is clean and pleasant-tasting steam.

A reasonable question may arise: what is an atomizer? This is the same as a vaporizer.

If you do not know which vaporizer to use, then use the recommendations of experienced smokers. Any viper will advise choosing either a “genesis” or a replacement model.

Depending on the need for maintenance, atomizers are distinguished between serviceable and maintenance-free.

Other unscrewing methods

You can unscrew the atomizer from the base or the tank from the evaporator using special substances. During active vaping, a corrosive coating from burning and liquid remains on the inner surface of the electronic device. This leads to boiling of the elements, which are tightly fixed to the thread and are not susceptible to external influences.

VD-40 will help with servicing your vape; the composition is easy to find in any hardware store. Through the holes in the air duct or through the hole for vaping, you should try to drip WD-40 onto the connection and threads of the parts. Then wait 5-10 minutes. During this time, the plaque will dissolve, and the mobility of spare parts will improve.

Required Tools

The main parts of the smoking device are an atomizer, a cartridge and a battery. To disassemble, you need to unscrew the threads containing the atomizer and battery.

To disassemble the battery you will need:

needle;
drill;
pliers;
light hammer;
tweezers;
a plastic tube that is smaller in diameter than the device.

To simplify the work, it is recommended to have a diagram of the device so that the actions can be performed correctly.

How to disassemble the Iust 2 electronic cigarette, why does it taste bitter and leak?

An electronic cigarette is an automated device, which, due to certain circumstances (improper use, prolonged use, etc.) may become unusable. Repair of such devices can be carried out either independently or with the help of specialists.

In today's publication we will talk about how to disassemble the ijust 2 electronic cigarette.

Main causes of malfunctions

E-cigarettes eleaf ijust s occupy one of the leading positions among products in this category. However, some users of Just electronic devices note that soon after purchase some problems arise in using them.

Most often, vapers complain that their e-cigarette is leaking. Although there are often cases when the button to start the vaping system gets stuck.

But be that as it may, such problems can be solved by disassembling the device and eliminating the cause of the breakdown.

How to disassemble an Ijust e-cigarette?

How to properly disassemble the ijust 2 electronic cigarette? Surely this question is of interest to all users of such a vaping device who have encountered problems with the operation of this e-cigarette (leaking, button sticking, etc.).

So, to disassemble the ijust electronic cigarette, you must follow the following step-by-step instructions:

In the event that a button on a device gets stuck, you need to get to it from the inside. To do this, remove the rubber band that connects the cartridge and the battery itself, and by twisting and bending the junction of these parts, we slowly stretch them apart. This process is quite monotonous and not fast. So be patient. It is extremely undesirable to make sudden movements when trying to pull out the part. With such manipulations you will only break the e-cigarette.
Ultimately, you will be able to pull out the connector that secures the battery pack and the atomizer itself.
Next, unscrew the atomizer.
Now, having access to the battery pack, you can carry out the necessary resuscitation measures with it:
if the button is not working well, you need to check its contacts with the battery - if these measures do not help, then it is best to replace the faulty part with a new one (this is done in a specialized workshop).

Causes of e-cigarette leaks and their elimination

In addition to failure to follow the operating instructions for the device or improper care of the vaping device, electronic cigarettes can leak due to other circumstances.

This vape has only 5 spare parts.

Low quality, defective

If an e-cigarette begins to leak due to a defect, then in many cases this can be determined even without experience in such matters. Of course, here we are talking more about nameless products. So what does ijust have to do with vaping devices, many will ask?

It's simple, due to the increased demand for such devices, the number of counterfeits continues to grow inexorably. And due to the fact that most of the fakes come to us from the countries of the sun, we cannot control their assembly, as well as the quality of the spare parts.

A distinctive feature of a fake will be its low price. As a rule, the original costs twice as much as the fake. Therefore, if you are offered a branded e-cigarette at a low price, then think carefully about whether you need problems with its poor quality. After all, such products are made from low-quality consumables, and manufacturing technologies are not followed, which causes the structure to leak and cause other problems with it.

When to change?

It’s easy to understand that it’s time to replace the evaporator. If the vapor when inhaling becomes much less than before, the taste of the liquid is felt weaker and the throat is sore, then it’s time to change the evaporator. It is impossible to say exactly how long one vaporizer should last - everything is individual and depends on many factors: the type of liquid, the intensity of vaping and the device itself. For example, tobacco liquids clog the coil much more than fruit liquids. Coffee-flavored liquids also clog the coil intensively. The color of the liquid affects the wear of the coil: the darker it is, the faster the evaporator will become unusable. It would be more correct to measure the service life of the evaporator not by time, but by milliliters of evaporated liquid.

This, of course, does not mean that you should give up your favorite flavor just because it clogs the coil too much. You just need to always have a couple of replacement evaporators on hand.

But what to do if the old evaporator has failed and you don’t have a new one at hand? Despite the fact that the evaporator is designed to be disposable, it is possible to rewind it. But remember that you perform all these actions at your own peril and risk, and if you have a choice, it is better to purchase a new evaporator or a serviced base, which provides for independent winding replacement. If you have nowhere to buy a new vaporizer, but you really want to vape, you will have to service your device yourself. Most often, replacement evaporators are used on weak devices such as eGo, so we will talk about them. Owners of battery mods, as a rule, prefer to service their devices themselves.

What does the device consist of?

Yandex.RTB RA-424014-8

The Agest 2 set consists of the following components:

directly electronic device,

the evaporator itself,

a silicone ring whose function is to adjust traction,

USB cable for charging,

complete instructions for use.

How to disassemble the battery?

ijust 2 users are interested in the question of how to disassemble the device.

first of all, you need to screw the tankomizer to the battery block (one base will be quite enough, there is no need to use glass),
then you need to use a gas wrench to grab the base of the tankomizer, pre-clamping the battery block,
slowly and very carefully remove the tankomizer (you need to pull it in different directions),
Next, the protective cover of the battery block is removed and access to the internal contents of the device is opened.

What is required to disassemble an e-cigarette?

Before disassembling an electronic cigarette, you need to find out on what principle this device works and what spare parts it consists of.

To disassemble such a device for the purpose of repair, you need to understand in detail how these parts work.

Atomizer

An atomizer (clinomizer, steam generator, evaporator) is a device responsible for generating vapor from a smoking liquid. The atomizer consists of a wick and a wire wound on it in the shape of a spiral.

The latter can be made of kanthal, nichrome or stainless steel.

The wick is located in a ceramic bowl equipped with holes for air and fastening its contacts. The wick is closed on top by a bridge, which protects the wick from damage and supplies smoking liquid to it.

The bridge and bowl are wrapped in a metal sponge, through which the vaping liquid is transferred from the cartridge to the atomizer. Vaporization begins during the puff.

An electronic current is supplied to the incandescent wire, due to which it is instantly heated to the maximum temperature. At the same time, the smoking liquid in the cartridge boils and turns into steam, which, in fact, is inhaled by the vaper.

This component is a plastic mouthpiece equipped with a capsule soaked in a liquid mixture for vaping.

Simply put, the cartridge contains smoking liquid.

Battery pack

In e-cigarettes, the battery pack can be made in two forms:

Mechanical. It is activated by supplying current by pressing a button, which must be held until the end of the tightening.
Auto. Equipped with an LED, due to which, in fact, the blinking of smoldering is simulated. In addition, the battery is also equipped with a pressure sensor, through which the steam generator is turned on when the steamer takes a puff.

Now that we have understood the “insides” of electronic cigarettes, we can begin to consider the question of how to disassemble an electronic cigarette.

To implement this task you will need the following set of tools:

small tweezers;
pliers;
a plastic tube of smaller diameter compared to the device itself;
needle;
thin drill;
a small hammer with a rubber tip.

How to disassemble the Eleaf Ijust

This question is asked by almost all users of this device who have encountered the above problems. Such a device is easy to disassemble, which vapers themselves can do. If the button in the Ijust gets stuck, you must adhere to the following algorithms:

remove the rubber band connecting the cartridge and the power source;
By twisting or bending the connection of these parts, slowly stretch them away from each other. This process is monotonous and slow. Do not make sudden movements so as not to pull out the part. This is how you can break an e-cigarette;
pull out the connector that secures the battery pack and atomizer;
unscrew the evaporator;
Now having access to the battery pack, perform repairs on it.

Prevention of contamination and damage

Care and regular cleaning of your e-cigarette can extend its lifespan. In order for the device to delight you with aromatic smoke for a long time and with high quality, follow a few simple rules:

Read the instructions before changing parts of the device.
Purchase refill fluids, as well as other components, only from trusted places. The seller must have the appropriate license for the product.
Clean your cigarette regularly—every two to three months. It is also recommended to clean the cartridge every time before changing the flavor of the liquid so that different flavors do not mix.
Do not add too much liquid for refilling.
While smoking, do not take too deep breaths to prevent the device from overheating, otherwise the vaporizer in the e-cigarette may need to be replaced.
Do not use your e-cigarette in cold weather.
Keep the device charged as much as possible.

As you can see, caring for an electronic cigarette is not that difficult. It is enough to use a few simple tips, and a regularly serviced electronic gadget will not create problems.

We hope that our article helped you get answers to many questions - how to clean the vaporizer, how to handle different types of e-cigarettes, how to care for your device.

The process of dismantling the clergy

At first glance, it seems that such a device is assembled so tightly that it is not possible to disassemble it. However, as they say, “if you really want it, you can fly into space.” Therefore, a little theory, patience and voila, the clear is sorted.

Important! It is strictly forbidden to put a lot of effort when disassembling the clearomizer. Such manipulations will lead to its breakdown. So, the process of disassembling the clear is as follows:

So, the process of clearing the clear looks like this:

First of all, we disassemble the drip. We need to unscrew it from the steam generator. Yes, this can take a lot of time. But don’t rush: gradually, slowly unscrew the drip so as not to damage it, as well as the body of the clear itself.

Next, remove the sealing ring from the unscrewed drip. After this, if necessary, we clean these elements with a napkin (just not a damp one with a fragrance!).

The next step is to remove the heating element itself, in other words, all the “internals”. Let's say right away that it is almost impossible to unscrew them. There is only one option to remove all the contents from the clear body - squeeze it out. To do this, we take a drill, a screwdriver attachment, or something like that, so that the tool fits into the “socket” of the clergy

So, insert a suitable tool into the hole of the clearomizer and slowly, very carefully, tap it with a hammer. Literally 5-10 gentle blows and the wick will fall out from the opposite side of the evaporator. After this, remove the leakage protection (this is a small cap that is located directly on the heating rod). There is a small hole inside the metal rod

It contains a heating coil. If it is necessary to replace this structural element, certain difficulties may also arise. You can replace the spiral using a screwdriver or other pointed object. But first you need to squeeze the rubber seal out of the metal rod. This is done very simply. Using a toothpick, remove the rubber sealing ring-insulator, which is located at the top of the metal rod. Then we take a suitable tool (screwdriver, etc.) and carefully, so as not to damage the rod, try to remove the heating element.

That, in fact, is the whole process of disassembling the clearomizer. The same principle applies to the assembly of the clergy. Following these simple recommendations, even a novice vaper can easily disassemble his electronic device, in particular the clearomizer.

I would like to note that more expensive models of electronic devices equipped with clearomizers have special latches that make it easy to disassemble and reassemble this structural element. Therefore, if you do not want to suffer for a long time, then give preference to more expensive vape models with clears. Well, there, the choice is always yours.

What do you think about this? How do you organize the maintenance of the clearomizer on your e-cigarette?

Why doesn't the atomizer unscrew?

First, let’s clarify the problem: the atomizer cannot be unscrewed from the mod or the lid cannot be removed to add e-liquid.

In the first case, there may be several reasons:

the atomizer did not get onto the connector thread;

under the influence of high temperatures, the design of the device expanded, and the mod fit tightly to the atom;

The atomizer was not removed from the mod for a long time and diffusion occurred.

The last reason is too unlikely, since the diffusion of metals takes years. However, if you haven’t bought a device for three or four years, then anything is possible. In this case, it’s easier to buy a new vape, because even wire cutters won’t help.

Is it possible to assemble a vape yourself?

Vaporists are confident that the purchased device will cost less than regular purchases of tobacco products

However, taking into account trade margins, it becomes clear that not everyone can afford an electronic cigarette. And experienced steamers are trying to make such a device themselves.

In such a matter, the choice of materials and the necessary tools with which to create a homemade electronic cigarette is important. If the assembly is done correctly, then during operation you can avoid negative manifestations in the form of burn spots on the face, damage to the respiratory system

A smoking mixture is created using the same principle, only here some knowledge of chemistry will be required. And if you don’t have the necessary experience, it is recommended to purchase a finished product and fill it with the factory mixture.

Why and when is cleaning necessary?

Electronic cigarettes, unlike pipes and hookahs, have a more harmless and even somewhat environmentally friendly appearance. The vapor generated through this gadget does not have an unpleasant odor, as is the case with traditional tobacco cigarettes. It does not settle on the surfaces surrounding the steamer with a nasty yellowish coating.

Moreover, in some cases, e-mails help get rid of nicotine addiction, which is very encouraging. Even ash and coals do not remain during electronic vaping. Then the question involuntarily arises, what should such a device be cleaned of?

Inside the vape there is a heating coil, which, in contact with the vaping mixture, gradually becomes covered with soot.

And this, in turn, causes some not entirely positive changes in the vaping process:

changes in the taste and smell of the generated steam;
difficulty in steam generation;
leakage of refilling liquid, contact with the battery and, as a result, breakdown of the power source;
reduction in the service life of the atomizer and the electronics itself.

Knowing how to rinse out old liquid from an electronic cigarette is also worthwhile for those who like to experiment with liquids for refilling a vape.

If changing the steam liquid was not accompanied by washing the cartridge, then this is fraught with a change in the taste of the newly filled refill, or rather, their mixing with the previously used liquid. Hence the incomprehensible and unpleasant taste and aroma of the released steam.

If you don’t count the number of puffs you take (in principle, few vapers do this), then you need to focus on the following signs:

general difficulty in the vaping process;
a sharp and noticeable reduction in the volume of generated steam;
the appearance of a burning taste and other foreign aromas and tastes;
atomizer leakage (as one of the reasons).

As soon as these signs are detected, the evaporator should be immediately cleaned of any carbon deposits that have formed. If we are talking about flushing the steam generator from the old liquid, then everything is clear - we steamed the refill, wanted to change the taste, we flush the atomizer.

Important! If you do not organize timely cleaning of the evaporator, both from carbon deposits that have formed and after old refilling, this will not only negatively affect the quality of vaping, but can also cause breakdown of the steam generator and the electronic cigarette itself.

Ideally, it is better to entrust a grandiose “bathing” when the vape steam generator is very dirty to professionals, which will avoid problems in the event of an incorrect procedure for cleaning the gadget. But with the right approach, you can cope with such a task on your own.

Disadvantages of use

There are several negative aspects to note when using travel bottles:

It is impossible to understand when to refill a perfume atomizer if the model does not have a special transparent window that allows you to monitor the amount of liquid. You risk being left without your favorite scent at the wrong time.
If the original bottle came with a spray bottle, then there is a risk of spilling the perfume, since self-filling options are not suitable here.
You should not skimp on quality - if the plastic is not durable and cheap, then the case can crack even from a small impact. We remind you that it is not possible to replace parts in automatic containers. Before purchasing, we advise you to familiarize yourself with the manufacturer, characteristics and reviews of other buyers.

In addition, many users often simply do not trust such accessories. Some say that they cannot protect perfume from spilling, and also do not retain the aroma well, contributing to its weathering. Others say that the original bottle is very important for preserving the composition in its original form: if the original container is red, then this is not a design, but a necessary factor for proper storage of the perfume. In any other case it will simply collapse.

Vape design

The device is considered an alternative to tobacco products. The product is designed to convert a special liquid with flavors and nicotine into vapor, which is inhaled by the smoker.

Based on their functional features, such products are divided into several types:

box mods have a control board, in addition, the steamer can control the process;
mechanical mods - no electronic system.

In addition, vapes differ in size and type of atom.

Any brand of device has a mod consisting of specific components:

battery (mechanical or automatic);
cartridge for the mixture;
evaporation compartment (atomizer);
There are models that have additional elements that help control the flow of the flavored mixture.

The vape atomizer is represented by a small cylindrical container.
Inside there is an evaporation system responsible for converting the mixture from steam. This system consists of a spiral wound around a wick and a group of contacts. The steam generator may vary in coil thickness. The wick is placed in a special cup with holes for contacts and air flow. On top, the element is protected from possible damage by a bridge through which the smoking liquid passes. The cup and bridge are wrapped in a metal sponge, through which the liquid from the cartridge enters the steam generator. With each puff, a process of steam formation occurs.

What it is

This perfume assistant looks like a miniature container, which consists of a spray bottle or applicator and a flask. A small but stylish item, it has a laconic design and is the size of a lipstick. The economical sprayer is specially designed for applying fragrance in small portions.

The first copy appeared back in 1878 at an exhibition in Paris and immediately attracted the attention of famous perfumers and most women. The sprayer in these models was a bulb connected to the neck with a flexible tube. In 1926, their production became widespread, and the design acquired a modern look - it became even easier to draw and fill the atomizer with perfume.

As a rule, the device has a standard shape and is divided in appearance only by color and design; it may have accompanying accessories, for example, a leather case. Opaque options are made in a wide variety of colors, look bright and attractive, and also always have a glass area on the body - this way you can monitor the level of liquid inside and, if necessary, update it in a timely manner. Transparent ones are also decorated with various decorative elements. There are really expensive models, for example, exclusive vintage samples or made of crystal or Murano glass. Of course, it is impossible to purchase these in a regular chain store; they should be ordered on specialized websites.

How to remove stuck drip tip

You can find out the exact cause of the malfunction of the electronic cigarette only by disassembling it. Only after studying all the details and the operating principle will you be able to find the breakdown and quickly fix it. To disassemble the device you will need a special small key or tweezers.

The algorithm for removing stuck drip is as follows:

Using a wrench or tweezers, disconnect the battery tank and mouthpiece from the device.
We unscrew the metal part of the body from the flask and wipe it thoroughly with a dry napkin or cotton cloth.
We remove the bridge and we have access to the coil. There, using tweezers, we extract the cotton wool.

The algorithm of actions is very simple. It is worth remembering that all parts must be removed carefully so as not to touch or damage others. After removing the stuck drip tip, thoroughly wipe the device and replace it with a new one.

Instructions for unscrewing the tank

If the tank does not unscrew, then the problem is solved by performing the following manipulations:

Stop the base without applying any force, as the glass may crack and will not be suitable for further use. Make this with some thin object that will fit into the air vent. This way you will fix the body;
Using rubber gloves or a thin rubber mat, unscrew the evaporator, glass or drip tip so that your fingers do not roll over the body of the device;
Wrap the glass in a couple of layers with electrical tape or adhesive tape so that the glass is not deformed with pliers if you are unable to remove the clearomizer by hand;
Use a wet cloth/thin stream from the tap to rinse the joints and clean the threads. If there are no liquid residues on the fasteners, then everything was done correctly. It is better not to refuel the e-cigar while unwinding the tank;
Unscrew the remaining parts and wash them thoroughly;
Install the glass several times, clean parts will not leak.

What causes the drip tip to heat up and how to avoid it

Most often, the drip tip heats up due to neglect of operating rules. Frequently pressing the button degrades battery performance. This causes the device to overheat. As a result, the vaper feels a bitter taste when smoking.

The drip heats up for the following reasons:

Incorrect vaping.
Prolonged misuse.
Weakly impregnated wick.
Battery failure.

If the device is constantly turned on/off, smokes improperly and overheats, it will begin to get very hot. This situation can only be corrected by burning. But only if you have done this before. If you have no experience in this, then it is better to buy a new spiral.

Other options for unscrewing the tank

Thanks to special substances, it is possible to disconnect the atomizer from the base or the tank from the evaporator. In the process of active vaping, so-called gars are formed inside. Because of them, the components of the liquid boil, which settle tightly on the thread and do not solidify.

WD-40 is a substance that is sold at hardware stores. This composition must be dripped onto the thread through the air duct or hole for vaping the puff. Then you need to wait 5-10 minutes for the plaque to dissolve. Then rinse the vape to remove any remaining WD-40. The mobility of parts is guaranteed to increase.

Glass is the most vulnerable element of e-cigarettes. Owners of rare devices purchased from AliExpress or other foreign online stores have long been convinced of this. Components for new devices are rare in stationary vape shops.

It is impossible to repair cracked glass. In addition, with constant unscrewing/twisting, the crack only increases in volume. To avoid the cost of purchasing a new electronic device, it is more rational to clean your device after every 2-3 refills.

How to disassemble an electronic cigarette step by step instructions

Many people already know how an e-cigarette differs from a regular one. This is an alternative to smoking that does not cause such significant harm to the health of the smoker and the environment. The essence of an electronic cigarette is that it emits vapor containing nicotine - combustion products and harmful chemical compounds do not enter the lungs, as is the case with a tobacco cigarette.

What you need

Most modern ES models are very easy to disassemble and unscrew into pieces due to the thread, but there are also those where special tools are indispensable.

To disassemble your e-cigar, prepare the following tools:

small tweezers;
a plastic tube with a smaller diameter compared to your e-cigarette;
hammer, possibly with a rubber tip;
pliers;
thin drill;
soldering iron:
needle.

Before you get started, you need to understand the ES mechanism itself.

As a rule, it consists of the following parts:

cartridge for smoking liquid (or clearomizer);
battery;
atomizer (a device responsible for evaporating vape liquid).

In most cases, it is the last component that fails. If the atomizer is replaceable, then the malfunction can be eliminated by installing a new evaporator. You can also check its serviceability yourself.

Having all the necessary tools, a little time and patience, we will tell you how to disassemble an electronic cigarette:

Take tweezers and use them to carefully remove the central contact and unsolder the wire. Disconnect the cartridge

Then you need to bend the battery away from the atomizer. Do this very carefully, with smooth movements - bend and unbend the cigarette at the junction of these two components. It is necessary to continue these manipulations until there is a gap between the thread and the ES body. If possible, remove the housing. Do this extremely carefully so as not to damage the fragile connector wires. At this stage, you can also replace the battery if someone does not know how to disassemble the battery of an electronic cigarette. If you only removed the outer part of the case, put it back on and continue bending this device. If a thread appears, you need to insert a plastic tube from the side of the cartridge and knock out the “insides” of the atomizer with a hammer. Just don't need to put a lot of effort into it. Next you need to remove the lower plastic washer. Remove the existing wires - if they are glued, then use a needle to carefully clean the glued areas. The wires that are completely glued will have to be torn off with pliers, and the holes filled with glue will have to be cleaned with a drill. There are circles at the bottom of the metal tape that need to be removed. The tape is wrapped around the bridge, so remove it by unwinding the tape and removing it completely from the glass; Remove the coil by pulling the wires from the battery. In the case where the spiral is severely damaged, you can pull it out with tweezers from the cartridge side.

In this way, you can disassemble standard devices and not rack your brains about how to disassemble the ego t electronic cigarette. To assemble the ES, perform these manipulations in reverse order.

How to get to the button and change it

In order to get to the button of the electronic cigarette, you must:

Remove the rubber part of the electronic cigarette;
Rotate the junction of the battery and the container with liquid;
Pull out the connection connector;
Twist the evaporator;
Remove the board and electronics;
Get to the button and fix problems associated with it.

It is important to do all this on a flat, clean surface, as there are common cases when some of the components and devices are simply lost

How to properly disassemble an atomizer?

In order to correctly and without consequences disassemble the atomizer of an electronic cigarette, you must perform the following steps:

In order to separate the inner component of the cigarette from the outer body, it is necessary to roll the steam generator on a hard surface, slightly pressing it on top;
After this, you need to pick up the top edge of the cigarette and remove the contents. If the tenacity is poor, you need to use tools;
Next, you need to use a screwdriver and carefully separate the top plates, and then pull out the wick;
The last step is cleaning the atomizer. After this, you need to repeat the sequence in reverse order to assemble the cigarette.

An important point: this work must be done carefully, since the steam generator contains a lot of small parts and components that can be lost when disassembling the electronic cigarette.

Conclusion

Thanks to its relatively simple design, anyone can take the ijust s apart and put it all back together. In this case, it is necessary to act and carry out all procedures carefully, without any sudden movements or pressure.

In order not to disassemble or repair ijust s too often, you need to remember about preventive measures, the main one of which is to use only high-quality fluid. Using poor quality fluid may cause your ijust s to malfunction.

How to disassemble an atomizer

Let's look at how to “dismember” an atomizer for cleaning using the eGo-T device as an example.

First you need to separate the insides of the atomizer from its body. You won’t be able to figure it out so easily the first time, but you have to try. To do this, sometimes it is enough to roll it several times on a hard surface, pressing it on top, for example, with plywood. Then, hooking it by the top edge, remove the insides. Remove the rubber sealing ring and separate the top plate. This is done using a screwdriver. There is a wick inside. In order not to cause harm, when removing it, you need to push, not pull. After this, the atomizer can be washed and cleaned.

In other models, the evaporator design may differ, but, in principle, all atomizers are designed similarly. They have a body, seals and what actually allows the liquid to evaporate, that is, a heating element.

The main thing is that disassembly must be carried out extremely carefully. This concerns the atomizer primarily due to the abundance of small parts.

Before you begin disassembling, it is important to know your e-cigarette well. That is, imagine where and what it has and what it is called, so as not to confuse the battery with an atomizer. And so as not to try to tear off something that cannot be disassembled.

Which atomizer is better to choose?

In order for the accessory to please you 100%, you need to pay attention to the following parameters:

required volume;
the material in which the product is made;
refueling method.

You should not order dubious purchases on aliexpress; pay attention to the official websites of trusted brands. Otherwise, you risk finding an aromatic “flood” in your purse. In order not to overpay, it is better to order a reliable mechanical model with a screw-on lid than an automatic one of dubious quality.

We also recommend giving preference to glass. In plastic flasks, as users note, perfumes can change their smell after a few months. To avoid such trouble, you need to choose options with a small milliliter.

In conclusion, we recommend watching the video “Atomizer for perfume: how to fill the flask with perfume water.”

Battery repair

Any power source has a certain maximum number of charge-discharge cycles, after which there is no longer a need for repairs.
And if the unit is new, then the faults should be eliminated. The battery in a vape consists of specific elements:

power supply;
buttons;
connector;
fees.

More expensive models may have USB connectors, voltage regulators and additional boards.

The structure, which seems solid in appearance, is disassembled as follows:

the connector part is removed (it is either unscrewed using a threaded connection, or pulled out using pliers previously wrapped in a soft rag);
you should pull without effort, slightly loosening it;
after that the remaining parts are obtained;
if there is an additional board, then open the bottom plug;
Now you can troubleshoot.

To facilitate the pulling process, pry off the top with a sharp knife or screwdriver. Work is carried out carefully so as not to damage the battery pack.