How to dye pants black using folk remedies

Share on social media networks:

Over time, any thing loses its color, this especially often happens with black products, the color of which, with constant exposure to sunlight and detergents, becomes pale gray and dull. And your image in such a thing is no longer so presentable and beautiful. Of course, when faced with such a situation, you can buy new pants, but this is a complete waste of money, and it is not always possible to immediately find a suitable model. It’s easier to try to revive the fabric and give it its former brightness. To do this, you just need to know how to dye pants black at home. This is exactly what this article will discuss.

What do you need to dye black trousers?

To dye black trousers in the washing machine you will need:

washing powder;
fabric dye;
disposable gloves;
glass bowl
metal spoon
coarse salt
vinegar
chlorine bleach.

It should be noted that you can only dye things in a washing machine if it has a top loader; the prepared paint, along with a large amount of water, must be poured into the washing machine.

If dyeing trousers is done manually, then you will need:

black paint;
disposable gloves;
ordinary water;
color fixer.

Coloring - process and instructions

Straighten out the creases in your jeans

After washing jeans, leave them wet to drain. Before immersing jeans in dye, twist them by hand to remove excess moisture. Straighten the fabric and remove all creases in the fabric, otherwise the dye will spread unevenly and you will get a “cooked” effect.

Straighten out the creases in your jeans

Place the jeans in a pan and stir them

Place the lined jeans into a pan of colored water. Using a long-handled spoon, stir them for 30 minutes, or until they are as black as you like.

When you stir the jeans into the pan, move them away from you and towards you, and then up and down, so that the dye is evenly absorbed into the fabric fibers. Do not allow the pants to twist, otherwise the jeans will become stained.

Place the jeans in a pan and stir them

Remove clothes from pan

If you like the black color you get, remove the pan from the gas. Remove the item from the pan. Rinse the jeans thoroughly until the water runs clear. Rinse them in warm water in a basin, gradually turn the water colder until it washes away all the excess blackness.

Some dyes are sold immediately with a special fixative for dye on denim so that it does not wash out and become faded. The composition can be coated on jeans immediately after dyeing.

Remove clothes from pan

Wash your pants by hand

Hand wash your jeans in a basin. It's better to use liquid detergent. Rinse with cold water. If you are lazy, you can load the item with any towel you don't mind into the washing machine. The towel will absorb excess paint when washing.

Wash your pants by hand

Dry the freshly dyed item naturally

Don't wring out your jeans or blow dry them to see the results of your efforts faster. Dry the product on the balcony or drying rack; It is permissible to dry it in the machine drum, if you have such a function, along with an old towel.

Dry the freshly dyed item naturally

In what cases may it be necessary to dye jeans?

Clothes, unfortunately, wear out over time and lose shape and color. Despite its strength, denim material can wear out and its shade can fade. To give your jeans a fresher look, you can dye them. Black paint will also help hide stubborn stains.

Dyeing denim will also help if you don’t like the color of the purchased item over time. With the help of home dyeing, you can give your jeans fashionable shades and patterns: “varenka”, stains, patterns.

Repainting old things will also allow you to always be in trend and follow fashion trends without unnecessary expenses. Or maybe you've decided to completely update your wardrobe, and the color of your jeans doesn't match your new clothes. In order not to spend money on buying new trousers, it is easier to repaint them.

You will need it

– fabric dyes;
– ammonia;
- salt;
– bleach:
– gauze;
- Bowl;
– wood tongs or stick;
– large capacity.

Determine what fabric the pants are made of. Some materials are difficult to color. For example, nylon, lavsan, nitron and some other artificial fabrics do not dye well. It’s great if you still have the label with the ingredients written on it. Often, garments are made from mixed fabrics, and it is important to know which fibers are more numerous, natural or artificial.

Weigh your pants. This is important in order to find the amount of dye - the proportion in relation to the weight of the laundry is usually indicated on the labels. You need to weigh dry pants. In the latter case, the mass can be found approximately.

If there is a need to paint new pants, the product must be washed beforehand to get rid of antistatic agents or other impregnations. It is also useful to soak the trousers in a solution of ammonia and then rinse. For the solution you need 50 g of 25% ammonia per 10 liters of water.

Choose the right color. It’s best, of course, to turn light-colored pants into black, but it’s also possible to do the opposite. True, in order to get a lighter tone than it was at first, the product needs to be bleached. This can be done with any kind of bleach; fortunately, the choice of them in hardware stores is quite large.

The method of working with dyes is usually indicated on the packaging. The following is more widespread. Pour the required amount of dye into a bowl. Add warm water to the powder evenly and stir. You should get a homogeneous paste. Add still warm water to the bowl (0.5 liters per package of powder) and mix well again. Strain the dye through 2 layers of gauze and pour into a container designed for dyeing trousers.

Add warm water to the container. Its volume should be approximately 10 times the volume of the tissue. Dip your pants into the solution so that they are completely submerged in water. Make sure that when boiling, pieces of fabric do not rise above the surface. In this case, you will really need wood tongs or even just a long stick that can be used to press down your pants. Boil the pants over low heat for about 20 minutes. The temperature of the water you add to the container should be approximately 45°C.

We suggest you read How to remove rust from metal at home

Take out your pants. Prepare a solution of table salt - 2 tbsp. for 2 liters of water. Pour the solution into the container in which the coloring is made. Place your pants in there again and simmer over low heat for another 10 minutes. Then remove the container from the heat and let the pants sit in the solution for about another half hour. After which all you have to do is rinse them properly.

Types of dyes

Industrial production means:

powder compositions: paint is available in dry form, in powder form;
Ready-to-use liquid products are specially developed pigments intended for dyeing fabrics.

Pay attention to: How to paint the ceiling in the bathroom?

Use available tools:

refilling printer cartridges (black);
natural coffe;
tobacco ash.

These options are not recommended for improving the color of expensive items, since there is a high probability that the trousers will be irreparably damaged. There is no guarantee of a good result in this case.

How to choose paint

Recommendations:

Composition: Before purchasing, you need to pay attention to whether the components of the product are listed on the label.
In the production of counterfeit paints and compositions that are produced in artisanal conditions, important information is often missing, including the types of main components. In addition, the composition allows you to determine how high-quality and effective the chosen product is. Thus, it is recommended to purchase a helmet that does not contain lavsan and niton. These components can ruin the item because they contribute to its uneven coloring.
Material type. The label indicates for which fabrics the composition is intended. If the wrong product is used, the material may be colored unevenly or may result in a color that is not what was expected, such as a lighter color. There is another danger: the material will be colored, but after the first wash it will begin to fade a lot.
Type of paint. The compositions differ in structure, which determines their properties. The choice is made taking into account the method of application of the pigment. This is due to the fact that each type of paint is designed to paint products under given conditions. When the requirements for the procedure are not met, the quality of the painting deteriorates.
Application of universal compositions. In the absence of information about the type of material, it is permissible to use a product that is suitable for dyeing cotton, linen, wool, silk, and viscose fabrics. In this case, the color can be preserved for a shorter period than in the case when a highly specialized composition is selected.
Best before date. It is not recommended to use products that have lost their properties.

Pay attention to: How to paint heels at home

How to Work With Black Denim Pants

The most reliable way for those who are going to dye trousers is to purchase specialized fabric preparations. Such means can give the material black, blue, cyan tones. If you do not have the opportunity to purchase the drug, you can dye your jeans black with hair dye at home. The method is interesting, but it is better to resort to its use in extreme cases. The procedure flow looks like this:

Buy some paint. When choosing, pay attention to its shade. Try not to make mistakes, otherwise you will most likely not be able to get the desired tone. Just in case, if your panties are too big, buy a couple of packs.
Dilute the drug in water. Determine the amount of water “by eye” so that you can subsequently completely immerse your pants in it. Leave the item in the solution for an hour and a half.
As soon as the deadline expires, rinse your pants. First, immerse in clean water, then add soda and salt.
Dry the new item and evaluate the result.

Important! You can dye your jeans with hair dye, but remember that the result can be the most unexpected.

How to dye black trousers in the washing machine?

Dyeing trousers in the washing machine is easy. The paint packaging details the painting steps, but if the instructions are in Chinese, English or another language, then it is unlikely to be useful. Let's look at the detailed dyeing of black trousers in the washing machine. To do this you need to do the following:

Before painting black trousers, you need to wash them in washing powder, using a stain remover, but under no circumstances use fabric softener. After washing, you can proceed to dyeing.

Put on rubber gloves and pour two to three packets of dye into a glass bowl. Then pour the dye with hot water - at least 2 glasses of water per 1 package of dye. Mix well with a metal spoon so that the paint is completely dissolved in the water. Then add 1 cup of coarse salt and mix well again.

The dye for dyeing black trousers must be completely dissolved in water.

Fill a basin with hot water, add a mixture of dye, salt and water, also add 1 glass of vinegar and 1 tablespoon of washing powder, mix thoroughly and pour the finished mixture into the washing machine.

We invite you to familiarize yourself with what determines the shelf life of meat and how long it is, depending on its type?

Observe the concentration of dye, salt, vinegar and washing powder

Place wet jeans in the washing machine and set the wash cycle to no more than 30 minutes. When the wash is finished, take out the pants and rinse several times until the water runs clear and hang to dry.

To dye trousers in the washing machine, it is better to use a top load machine

Using a washing machine to dye black trousers can achieve long-lasting color and uniform dyeing.

What do you need to dye black trousers and jeans?

To dye your pants black using a washing machine, you will need:

washing powder;
washing machine;
fabric dye;
vinegar;
disposable gloves;
glass bowl;
coarse salt;
metal spoon;
chlorine bleach.

Important! It is allowed to dye things in a washing machine only if they have a top load, because the prepared paint, as well as a large amount of water, must be poured into the washing machine.

If trousers and jeans are dyed by hand, then you will need:

black paint;
a pair of hands;
disposable gloves;
color fixer;
ordinary water.

How to dye black trousers using a washing machine?

Dyeing trousers black at home using a washing machine is not difficult. The packaging containing the paint should describe in detail the painting sequence, but if the instructions are written in Chinese, English or another language that you do not understand, it is unlikely to be useful to you. Let's take a look at detailed dyeing of black trousers in the washing machine. To do this, follow these steps:

Before you start dyeing your trousers black, you need to wash them in washing powder, remembering to use a stain remover, and in no case with fabric softener. When the washing is finished, you can proceed to dyeing the trousers themselves.
Put on rubber gloves, and then pour 2 or 3 packages of dye into a glass bowl. Pour the dye with hot water, at least 2 tbsp. water for dye packaging. Mix everything thoroughly with a metal spoon so that the paint is completely dissolved from hot water and external influences. After this, add 1 tbsp. coarse salt and mix thoroughly again.
Fill a basin with hot water, add a solution that consists of dye, salt, water, and also add 1 tbsp. ordinary vinegar and 1 tbsp. l. washing powder, mix everything thoroughly and pour the prepared solution into the washing machine.
Be sure to observe the concentration of dye, vinegar, salt, and washing powder
Place the wet trousers inside the washing machine and set the wash cycle to no more than half an hour. When the wash is finished, carefully remove the pants and then rinse several times until the water runs clear. After this, hang to dry.

Important! Using a washing machine to dye black trousers, you can achieve long-lasting color as well as even dyeing if the above rules are followed.

How to hand dye black pants?

Dyeing clothes by hand is rightfully considered the oldest method, which can either give things a rich color or completely ruin them. For proper painting, perform the following steps, strictly following the sequence:

Buy paint that is designed for hand-dying things.
Dilute it with water, stir thoroughly and pour into a large container.
Place the trousers there and leave in this position for a while - approximately 20-30 minutes.
After preparing the paint solution, place your pants in a container of water.
Next, transfer the pants and dyeing liquid to a fire-safe dyeing vessel.
Constantly turn the pants over using a clamp or a large metal spoon.
For greater effect, simmer the item over low heat. This whole procedure should last no more than 30-40 minutes.
After boiling, rinse the trousers in acidified or salt water, do not forget to add 1 tbsp. l. vinegar because this will help set the color.
Then dry thoroughly.

If you are starting the process of painting things for the first time, first paint something that will not be of particular value to you. And if you managed to get a good result, the technology has become clear to you down to the smallest detail, proceed to restore the shade of your pants for constant wear.

How to dye black jeans

To restore color to black jeans, various methods are used depending on the composition of the fibers and the available trouser dye. When purchasing a dye, you need to pay attention to the instructions for use.

If the denim contains lycra, the temperature during dyeing should not exceed 40 °C.

The result of the work will depend on careful adherence to the specified rules and calculation of the required amount of product, for which the trousers (dry) must be weighed using a floor scale or steelyard.

Immediately before you dye black jeans at home, they should be wet, lightly wrung out and turned inside out.

How and how to dye denim black?

Now many will ask the question, why complicate everything if it’s easier to go and buy new trousers of any color and size? However, it is not a fact that they will fit perfectly and become your favorite.

But small flaws can be hidden under paint. By changing their color, you can revive your jeans and make them look like new.

Give new life to old jeans

How to dye jeans black? I have identified 3 main ways to change the color. Let's look at each case separately.

Method 1. Special paints

You can purchase special powder paints online or at a hardware store. With their help you can dye an item in the washing machine. All you need to do is follow the instructions on the package.

This is what a bag of paint looks like

If you purchased a foreign-made composition, then proceed as follows:

We prepare the jeans, turn them inside out, and check the optimal washing temperature on the label.
Then we put them in the washing machine and pour the powder on top.
Start the selected washing mode.

Instead of washing powder, add dye

After this, rinse them in warm water with the addition of vinegar, it will help fix the color.
Then wash it in the usual way with powder.

There are paints that do not pour into the drum, but are placed directly with the packaging in the washing machine. Read the instructions carefully!

Read the instructions on the package before use

Method 2. Hair dye

How to dye black jeans at home if you can’t buy special dye? For such purposes, regular hair dye is useful.

Be careful with shades! And if the jeans are large, then buy 2 packs of paint.

You can dye your jeans with hair dye

We dilute the paint in warm water so that the trousers are completely covered with the solution.
Leave everything for 1 hour.
We take them out and rinse them first in plain water, and then add salt and vinegar.

This work is best done with gloves.

Method 3. Fabric paint

My favorite method remains! Now I will tell you how to dye black jeans at home using fabric paints. This method differs from the previous ones in that you have to tinker a little.

The photo shows fabric paint

If you purchased this paint, do the following:

dilute in water (proportions in the instructions for the composition), it is better to use a bucket or deep container;
place our jeans into the prepared mixture;
put it all on the fire and boil for 1-1.5 hours;
constantly stir the pants so that they are colored evenly and without streaks;
After this, rinse in salt or vinegar water to fix the pigment.

Rinse your jeans well to ensure there are no streaks left.

other methods

I’ll tell you about rare and interesting ways to change or update the black color on clothes. To update the color, you can soak the item in coffee, tobacco or black ink.

Coffee or tobacco . Prepare the solution yourself:

dilute 50 grams of ground coffee or 15 grams of tobacco in 1 liter of water;
soak black trousers for half an hour, the water should be cool.

Coffee is a natural colorant

Felt pens . Of course, we will not directly decorate our jeans with them! We take the felt-tip pen, break it and put it in water so that it changes color. And the paint is ready!

Blue, black, light blue - choose any one for yourself!

How to choose the right dye for black trousers?

In order to paint black trousers well at home, you need to purchase high-quality paint. It can be bought both in an online store and in any other where this product is sold. The paint packaging should contain detailed instructions for its use.

In addition, it must be indicated for which material the product is suitable. It should be noted that if the fabric of black trousers contains nitron or lavsan, then there is a high probability that the paint will not saturate or dye the trousers, but will only ruin them.

If you don’t know what material your trousers are made of, then it’s better to take a universal paint that can be used to paint cotton, linen, viscose, wool and silk fabrics. Before purchasing, you need to decide how you will dye your black trousers, since there are special powder dyes for use in washing machines or for hand-dying.

Dye for dyeing black trousers

The paint for painting black trousers must be of high quality, so it is better to buy it in specialized stores.

General recommendations

Dyeing things is not an easy procedure that requires accuracy and skill. And given that dyes and solutions can be dangerous for both fabric and skin, compliance with safety rules is simply necessary:

Work with paint only with thick rubber gloves. They reliably protect the skin of your hands.
Carefully study the composition of the dye and the instructions for its use.
Find the label on the product and see what icons and legends are shown on it. This will make it easier for you to navigate acceptable and undesirable actions in relation to fabric.
Determine what material you are dealing with. This will allow you to independently adjust the amount of dye. Natural fabrics can be dyed faster and with better quality than fabrics mixed with synthetic threads.
When diluting the solution, consider the original color of the clothing. If the pants are white or beige, then as a result of the procedure they will not turn black. You can only count on a dark gray shade. But if the trousers or jeans are initially gray or brown, then in this case the chances of getting a rich black color are much greater.

Before painting

There are a few things to consider before painting things:

Analyze all the pros and cons of the procedure . This is a risky business, and the result may not live up to expectations.
Consider the composition of the fabric . It is easy to change the color of natural fabrics. But if synthetic threads are present, the color may turn out to be paler.

The density and composition of the material affect the final result

Consider the original color of the clothing . If white is dyed black, the result will be gray or dark gray. But not black! It is better to choose tones that are close in combination.
Be sure to carry out the work wearing gloves.

Rubber gloves will protect the skin of your hands

Follow the recommendations indicated on the dye . The instructions will explain the necessary proportions and procedure.

Preparation

Before changing or updating the color, a denim item must be prepared:

Wash. Check for grease stains. When washing, do not use rinse aids, they can complicate the painting process.
Cut off all labels . In most cases, labels on jeans also become stained and therefore deteriorate. After the process they can be re-sewn.

Cut the label

If necessary, bleach . If your jeans are not blue, you will have to use bleach.
We are preparing a place to work . We clear the surface, cover it with newspapers so that the dyes do not get on objects nearby.

Proper preparation is 75% success!

Whitening

To improve the dyeing result, it is better to bleach a denim product. For this:

We dilute water and bleach in a 1:1 ratio . It is best to use a deep container, such as a bucket or basin. If the jeans are light, then a weaker solution is made.

Whiteness is an excellent bleach

Place the denim product in a container and leave for 1-2 hours . Every 20 minutes it is necessary to change the position of the thing, that is, stir.
After bleaching, you need to rinse your clothes again.

The jeans should not be pure white, they will most likely have a yellowish tint. Don't worry, the black pigment will cover everything!

Suitable materials

You can paint any wardrobe item yourself using special paints.

There is a wide variety of colors available on the modern market. With such a spectrum, everyone can choose the shade they need.

Fans of experiments identify several methods suitable for painting a product.

The most popular is dyeing in a washing machine. However, paint may remain on the drum walls. This will lead to damage to other wardrobe items.
Instead of a washing machine, you can use the manual method. For this purpose, enamel dishes are suitable, which are placed on low heat. The main thing when painting is to follow the manufacturer's recommendations.

Useful tips

For those people who don't often dye items from their wardrobe, the helpful tips and tricks listed below can come in handy.

If you have to paint a product for the first time, it is better to practice on an old unnecessary thing that you don’t mind throwing away if it fails.
To accurately determine the required amount of dye, the textiles must be weighed.
If the item to be repainted is intended to be remade, then it should be torn into pieces in advance.
Uneven coloring of synthetic fabric can be corrected by immersing the product in a hot soapy solution.
Items dyed black should be washed separately from other clothes. The fact is that they can fade and ruin all the other things in the drum.

We suggest you read: Cleaning a washing machine with vinegar

Dyeing your favorite clothes black, done at home, will not only return the items to a bright, rich color, but will also save time and money. The main thing is to buy paint from trusted manufacturers, follow the instructions and listen to the advice of experienced housewives.

Dyeing technology

Dyeing by hand and using a washing machine is different, so we will analyze each technology separately. The algorithm for manual coloring will be as follows:

Dilute the black dye with water according to the instructions on the package, then pour the solution into a large container.
Place the trousers in a bowl of dye and leave for 30 minutes. You can adjust the exposure time of the paint on the fabric yourself depending on the color you want to get as a result.
After the required time has passed, transfer the product to a container of water and leave for 3-5 minutes.
At this time, pour the coloring solution into an enamel pan or bucket and place it on the fire.
Next, put your pants back into the paint, wait until it boils, stirring and turning over occasionally.
Boil the product in the paint for no longer than 40 minutes.
Then take out the jeans and place them in cool water with a little salt and vinegar (1-2 tbsp each). This will help set the color.
Coloring is complete. Now all that remains is to wring out the item and dry it.

The procedure for dyeing pants in a washing machine is as follows:

Wash the pants you want to dye as normal.
Pour 2-3 packages of the finished dye into a glass container and fill them with hot water. Mix thoroughly using a metal spoon.
Add 1 cup of salt to the solution and stir again until it is completely dissolved.
Fill a basin with warm water and pour a mixture of dye and salt into it. Stir.
Add 1 glass of vinegar and 2-3 tbsp to the resulting solution. washing powder or liquid detergent. Beat until foam forms and pour into the machine.
Place clean, damp pants in the washing machine and set for 20-30 minutes.
Despite the fact that the automatic washing mode involves rinsing, nevertheless, at the end of the program, you must additionally rinse the clothes manually.

There are several ways to dye your trousers at home. Choose the one that suits you best and give old things a new life.

How to prepare jeans for dyeing

Before dyeing an item, it is necessary to bleach it so that the substance dyes the fibers more densely.

Step one - wash your jeans

To ensure that there are no components left on the pants that you intend to repaint that could interfere with the chemical reaction, you need to wash them thoroughly. Place the pants in the washing machine and wash them in a normal cycle according to the instructions on the label.

You shouldn't dry your jeans. They must be kept damp before bleaching or painting. If your jeans are gray or blue, then you do not need to bleach them; you can simply wash them and skip all the further steps in the instructions before dyeing.

wash jeans

Step two - heat the water

To bleach jeans in rich shades - red or orange, you need to create a solid base so that the black dye adheres more densely. Fill a large stainless steel pan with enough water to hold the item. Place the pan over moderate heat and bring the liquid to a boil.

Do not immerse jeans in water until it has warmed up. The water should heat until small bubbles appear, but not boil. Make sure in advance that water will not come out of the dish when you immerse your pants in it.

Do not use aluminum pans or non-stick cookware for painting. You can use an enamel container - for example, a basin.

Step two - heat the water

Step three - mix bleach in water

Jeans can be bleached with ordinary bleach, but it is better to use a special composition for bleaching the material before painting - it works as gently as possible. As soon as the water begins to boil, pour the bleaching component into it according to the instructions on the pack, and stir until completely dissolved.

Wear rubber gloves when handling chemicals to protect your hands from harsh chemicals. You can buy bleaching agents in the same places where clothing dyes are sold. If possible, it is better to use chemicals of the same brand for maximum effect.

When working with chemicals, be sure to open the windows in the room - air should circulate.

Step three - mix bleach in water

Step Four – Dip the Jeans in Water

Once the bleaching liquid or powder has dissolved, add the pants to the pan and stir with a metal spatula, stirring constantly. Reduce the heat and keep the item on the stove for about half an hour or until the color visually “disappears.”

Monitor the condition of the water so that the mixture does not boil. If you notice that the water will soon begin to boil, remove the pan from the gas for a while.

Don't expect your jeans to turn completely white - they will take on the black color perfectly, even if they remain grayish or faded yellow.

Step Four – Dip the Jeans in Water

Step Five: Pour the solution out of the pan

When you achieve the result, turn on the burner. Read the bleaching agent label to determine if it can be poured down the drain or if some other method of disposal is required.

Give the jeans five minutes for the solution to cool slightly, and then pour it down the toilet so that only the item itself remains in the container.

Step Five: Pour the solution out of the pan

Step six - rinse your pants and wring them out

Wear gloves. Remove the jeans from the pan and rinse them twice - in very hot water and in lukewarm water - and then wring them out. Do not use cool pressure as this will leave streaks on the fabric from the folds of your clothing.

Step six - rinse your pants and wring them out

Step seven - wash your jeans again

After two rinses, put the pants in the washing machine and wash them again with powder as usual. This will remove traces of chemicals and prepare the item for painting.

Do not dry your jeans after washing. They must be damp to paint.