How to turn on the Atlant washing machine video recipe step by step with photos

Washing machine installation

Unpack the electrical device and unscrew the shipping bolts. Their location is at the rear of the machine. Plastic plugs must be inserted into the resulting holes.

Now you can install the machine on a hard surface (no need to put anything under the device). Next, you need to adjust the legs so that the machine stands stable; to do this, you need to unscrew them to fix the desired height.

Preparing for launch

All modern models of washing machines differ little from each other in terms of launch. Before turning on the washing machine, check whether there is a power cord and whether the device is grounded. If everything is normal, then you can load laundry into the drum.

Each washing machine drum has its own weight category for which it is designed. Be careful, overloading may cause the crosspiece to fail. Most modern models have a function that notifies you if you have put more clothes than necessary.

After loading things, close the door. If you have a vertical drum, first close the door, and then the hatch. In a horizontal drum, close only the door.

The packaging of the powder should indicate the dose that needs to be poured into the compartment. It is important to stick to the dose, because if you pour in the powder, foam will appear, and if you do not add enough of it, the clothes may not be washed at all. To make sure you don't make a mistake, use a special measuring cup.

The powder tray has three sections:

left – main department,
medium – intended for air conditioning,
right – preliminary.

Powder tray
Basically, the compartments are located like this: on the left - for the main wash, next to it - for rinsing and pre-washing.

Now we need to supply the car with water. Most washing appliances are connected directly to the water supply, but some models have separate tanks. After completing this action, we connect the device to the network.

Next, you select the washing mode. The operating mode is selected by pressing the corresponding buttons. It is worth considering that they are determined taking into account the type of washing and the fabric that they plan to wash.

Selecting a washing mode

At this stage of time, there are the following types of washing:

gentle wash,
children's clothing,
quick wash,
washing everyday clothes.

As for fabrics, there are separate modes for the following types of fabrics:

Types of modes:

Special mode : This function is mainly found in new models; it disinfects and protects white items with steam and helps remove stains. It should be described in more detail in your machine manual.
Delicate wash : Slow wash and low wash speed. It’s good in that it prevents things from looking worn out, but it doesn’t wash very thoroughly. Suitable for delicate items.
Light spin : First a quick wash, then a slow wash.
Normal : quick rinse and equally quick spin.

Temperature detection

Temperature ranges from 30 to 95 degrees. Here are some recommendations for choosing a mode:

The temperature is selected depending on how dirty the clothes are. If you just need to refresh, then choose 30-40 degrees.
Synthetics wash perfectly in conditions of 40-60 degrees.
Bed and bath linen and accessories require the highest temperature.

Spin intensity

The intensity is determined by the number of revolutions per minute. Naturally, the more efficient the spin is, the less water there is in things; when you take almost dry clothes out of the washing machine .

Don’t forget that fabrics that require more care should be washed at a lower intensity. It is generally better to wash silk and chiffon without the spin function.

Washing program

Next we need to set the washing program. The differences between models are quite high with this function. Be sure to take into account the temperature conditions; if you do not turn it on carefully, you can damage things.

All information should be described in detail in your instructions. Expensive models are equipped with touch sensors, while simpler ones have a regular wheel. Now let’s start, to do this we find the “Start” button and press it.

When the washing process comes to an end, depending on your device, it will give a signal or a sound, or the button will flash that the wash has come to an end. We disconnect the device from the power supply, open the door and take out things.

Starting the machine

Having selected the desired option, adjust the temperature and spin speed if necessary .
If the desired mode is not found, then the parameters are set manually using the rotary selector on the machine panel. Modern models of Samsung washing machines allow you to control washing through a mobile application. The owner selects a mode on the phone and starts the process.

If powdered detergent is used for washing, it is poured into the second compartment of the container. In different models it may be designated as “II”, “B” or “2”. For pre-washing, the powder is placed simultaneously in the first and second compartments.

First start

The first wash can be a test wash to check your washing machine for leaks. This will allow you to check if everything is connected correctly. If you suddenly find a leak, stop it immediately.

If the experiment is successful, then you can wash your clothes. This point is important because a leak can damage your device.

Tips that will be useful after purchasing a washing machine:

If, after starting, your machine begins to make strange sounds, do not do anything yourself. Call the service, you should rightfully receive repairs under warranty or replace the defective one.
The housing requires frequent wiping; use products that do not contain chlorine.
The rubber seal becomes a source of dirt and must also be cleaned.
Hand-held powders are absolutely not suitable for washing in an automatic washing machine; this powder may not only fail to wash the laundry, but also cause damage.
You cannot overload the drum; read the instructions for the limit of your device.
Check clothes for missing items before putting them in the machine.
As soon as the wash is finished, do not rush to close the door, let it air out. If this is not done, an unpleasant odor and even mold may appear.
Descale frequently.

Remaining powder in the compartment can also cause damage to the washing machine, so you should:

Use a water softener that is specifically sold for this purpose.
Be sure to wash the container after each wash.
After washing, you need to let the tray dry inside; do not immediately close the door.
Clean trays.
The powder must be of high quality.
If you resort to concentrates, then do not forget to rinse the machine.

For high-quality washing you will need the following components:

A universal powder that is suitable for various types of laundry.
Powder containing bleach.
There are various products for colored fabrics in stores.
A product with a biological additive will remove the most difficult stains.
Special powders that allow you to wash in cold water.
Synthetic products.
Reagents that allow you to wash white clothes.

Preparing the machine

Before starting the washing machine for the first time, it is necessary to carry out a number of preparatory measures:

Check the connection quality. The rubber pipe is mounted to the outlet of the water supply, and the drain hose to the siphon or sewer.
Remove the transport bolts (located on the rear panel of the household appliance). A signal that this action item has been ignored will be the body vibrating during operation.

The holes from the transportation bolts must be closed with special plugs (included with the washing machine).

Remove the protective film from the information display and the tape from the powder container and hatch.
Check the washer drum for foreign objects.
Place the washing machine on a perfectly flat and hard surface (the service life of the household appliance depends on the quality of this step). To do this, twist the legs of the washer to the desired height, and then fix it with a wrench.

You can check whether the washing machine is positioned correctly by pressing one by one on the corners of the body. On a flat, hard surface, the washing machine does not wobble and is difficult to move.

How to prepare clothes for washing?

Clothes must have a label with instructions for washing. Always look at this information so as not to spoil things because something cannot be washed in hot water, or cannot be washed with bleach, or in general can only be washed by hand. Do not put items labeled with labels such as dry cleaning in the washing machine.

Organize items by color. Because one color can stain all your clothes. Sort into dark and light colors and denim items. Sort clothes into heavy and light ones. This will help the fabric look new for a long time. Heavy fabric includes jackets, fur coats, various bath accessories, sweaters, and cotton products.

To protect delicate clothing, it can be placed in the washing tray. But choose everything strictly according to color, maybe with a light fabric.

Separate clothes according to their stains; some heavy stains require separate preparation, such as greasy stains. Please note that at high temperatures, some stains are very difficult to remove, so it is highly undesirable to use it.

The Atlant washing machine began production in 2003. The company specializes only in assembly. The company purchases components from well-known foreign manufacturers of washing equipment. This article will tell you how to use the Atlant washing machine.

Advantages and disadvantages of washing units

The Atlant washing machine has both positive and negative sides. The positive aspects include the following:

the washing machine has a moderate cost;
The Atlant washing machine is adapted to work in conditions of low-quality electricity and water supply;
In terms of reliability, the Atlant washing machine is not inferior to popular models from global companies;
The quality of washing is not inferior to the best foreign analogues. According to the existing classification, the Atlant washing machine is produced only in class “A”;
The Atlant washing machine is multifunctional. The software provides many functions allowing you to perform washing of any complexity;
The Atlant washing machine is designed for various categories of users. It has a very simple control scheme. The display and indication allow you to control the work process. The program menu is Russified;
During operation, the Atlant washing machine does not create increased noise. It is not ideal, but sufficient so as not to disturb the comfort of the apartment’s inhabitants;
Most models are economical. First of all, this applies to energy consumption indicators. However, not every Atlant washing machine is economical, and when purchasing, you need to be careful when choosing a model;
Models are produced that can be placed in small apartments. The depth of such machines does not exceed 32 cm;
the machine is easy to operate and can last for many years without repair;
the machine is protected against unauthorized access by children;
easy to repair, spare parts can be found in many shopping centers;
The machine has a function that starts working automatically when the drum is loaded. It is used to determine the weight of the loaded laundry.

The machine does not work well during the spin cycle. The waste liquid is discharged according to the class “D” standard, and this is one of the lowest indicators. The laundry does not dry completely. In addition, in some models the spin process causes significant vibrations of the entire body. This often leads to the unauthorized movement of the unit from its previous installation point;
motors are used only of the commutator type. They are inferior in durability and efficiency to inverter models. And this leads to additional energy consumption;
The machine does not have a foam sensor. This can lead to flooding and a number of other breakdowns;
design flaws. For example, opening a hatch causes water to splash onto the floor. Due to insufficient density, debris may get trapped between the drum and the fins.

In addition, the car has other minor but unpleasant shortcomings.

Step-by-step washing instructions

The preparations are complete, you can safely start starting the Samsung washing machine for the first time:

Close the hatch door (a characteristic click indicates that the lock has been activated and the machine is ready to start washing).
A minimum amount of washing powder is poured into a special receiver (it is important that the product is intended for automatic washing machines).
Set the program with the longest washing time, the water heating temperature is 60°C. There is no need to disable the “spin” option. The washing machine must go through the entire cycle so that you can fully evaluate the performance of the household appliance.
As soon as the washing cycle is completed, the hatch door is opened and left for ventilation (such actions will help avoid the appearance of a musty smell).

Operating modes

You have to wash various things, even those that require delicate handling when removing dirt manually. The software allows you to work with things made from various fabrics, wool and even leather.

Setting a particular function indicates the following types of washing:

cotton. This could be bed linen, towels and other everyday items. Water temperature can range from 60 to 95 degrees. It depends on the density of the fabric and the model of the item. The duration of the process ranges from 90-150 minutes;
synthetic fabrics. They are subject to deformation and shedding. Therefore, the software function sets the water temperature not exceeding 60 degrees. The process time is set within 110 minutes, and the spin is set to intense;
delicate. This mode allows you to process items made of silk, wool, cashmere and other fabrics. The process occurs at a water temperature of 40 degrees and lasts within 55-60 minutes. The drum rotates slowly and the spin is turned off;
preliminary. This mode is used when there is heavy contamination. To do this, the machine performs a pre-wash first and then a main wash. Before starting this function, it is necessary to pour powder into the second compartment of the dispenser;
intense. The operation of this function is accompanied by a liquid temperature of 95 degrees and a working process time of 120 minutes. It is used in cases where there is dirt, sand or very old stains on things;
fast. This treatment removes unpleasant odors and minor stains. It resembles a simple rinse. The process occurs at a water temperature of 30-40 degrees for 15-40 minutes;
baby clothes. This mode is used to process delicate baby items (diapers, baby vests, onesies). This consumes a large amount of water. This is designed to completely rinse off any remaining detergent. The time for removing powder residues is about 1.5 hours;
sports things. The process of this mode allows you to process all types of sportswear, including various models of training suits. In addition, even many models of sports shoes can be washed;
combined. This mode allows you to wash items without pre-sorting. The main thing is that among them there are no clothes that can fade;
night In order not to disturb the silence of the night, the mode provides for turning off all types of alarms and reducing noise during spinning;
"Biophase" mode. Very often, organic and protein stains left by wine, creams, blood, herbs and other substances can appear on clothing. It is very difficult to remove such stains. They can be removed in combination with powder and the appropriate enzyme in the “Biophase” mode;
easy ironing. This feature turns on a low spin cycle, so your clothes come out somewhat damp. This condition of clothes makes ironing easier;
rinsing. This mode cleans clothes from residual soap suds. Detergents are removed not only from the surface, but also from the internal structure of fabrics;
spin The disadvantages of this regime have already been noted. Therefore, in order for the laundry to come out as dry as possible, there is an option to turn on a second spin, which lasts within 5 minutes.

Step by step guide

If the test wash was successful, we can start using the machine. In order for the purchased item to serve for a long time, you need to follow some recommendations.

Loading laundry

It is important not to overload the drum, observing the specified weight when choosing different modes. If the maximum load is considered to be 5 kg, then this applies only to the main mode. When washing synthetics, we put 2 times less clothes in the drum. When washing woolen products, make sure that their weight does not exceed 1 kg. We also take into account that underloading has a detrimental effect on the operation of the machine.

Before putting things into the drum, we sort things by fabric type and color. White clothes are usually washed at higher temperatures, so if a colored item gets into such a wash, it will fade on its own and ruin the rest of the laundry.

If there are pockets, be sure to check them for foreign objects. We fasten all zippers, otherwise open teeth will tear things during washing.

Mode selection

Typically, an automatic machine has a standard set of programs.

“Cotton” is the main and frequently used mode. It involves setting the maximum possible temperature - 95°C. When selecting this program, we can additionally set a pre-wash or soak mode for heavily soiled laundry. We take into account that this mode is the longest.

“Synthetics” is an equally common washing program in washing machines. When selected, heating will not exceed 60°C. The spin is performed with the same intensity as in the “cotton” mode.

“Manual mode” is configured for washing delicate fabrics. Heating when choosing this program is 30-40°C. Spinning occurs at lower speeds.

“Wool” - this program is not found in all models of washing machines. In this mode, the water is heated slightly, and there is no spin at all.

“Quick wash” or “express” is also not available in all models. We use this program only for lightly soiled clothes. The mode lasts no more than half an hour. It is designed for low heat (30-40°C) and high spin speeds.

Filling containers

Open the tray and pour powder into the corresponding compartment, add conditioner or other detergents. We select detergents according to the type of fabric: separately for white, for wool, for delicate fabrics, children's items.

Starting the wash

After the laundry is loaded and the desired program is installed, close the machine door. We connect it to the power supply, open the valve from where water flows into the drum. Now you need to start the washing machine and press the start button.

After waiting for the washing to finish, open the door and unload the laundry. Try not to leave damp laundry in the drum for too long. Next, disconnect the machine from the electricity, shut off the flow of water into the hose, wipe the drum with a dry cloth, and rinse the powder container.

Preparing for work

After a general introduction, it’s time to answer the question - how to use the Atlant washing machine.

Connection

In order for the unit to last longer, it is necessary, first of all, to study the procedure for preparing it for operation. First you need to properly connect to the electrical network, water supply and sewerage.

connection to the electrical network. First you need to make sure that the network parameters meet the current standard. First of all, this relates to the voltage level. If it differs from the passport conditions, then you need to think about installing a stabilizer. Otherwise, the machine may quickly fail. If the machine is connected via an extension cord, then you should remember that it must withstand power in the range of 2500-3000 W;
connection to the water supply network. Everything is simple here. Typically a plumbing tee is used for this. You just need to take into account that a cleaning filter and faucet must be installed along the flow of water. The length of the water hose does not matter;
sewer connection. To drain water, you can use two options: temporary or permanent connection. For temporary drainage, use a bathtub, sink or washbasin. For this, a special hose is used, the end of which resembles a hook. In this case, the height of rise of drain water should be within 60-90 cm.

Stages of starting a washing machine (Indesit IWUB 4105 (CIS)F062916)

1. If the question arises: “how to turn on the Indesit IWUC 4105 (CIS) F062918 washing machine,” then you need to start by connecting the plug to the electrical network into a two-pole socket with a grounding contact.

2. Open the hatch door of the Indesit IWUC 4105 (CIS) F062918 washing machine, load the recommended amount of laundry through the hatch into the drum, then close the hatch door tightly.

3. Open the tray and place the measured amount of powder and additives into it.

4. By pressing the ON/OFF button, turn on the Indesit IWUC 4105 (CIS) F062918 washing machine. All indicators will light up for a few seconds, then go out, leaving only one START/PAUSE indicator blinking.

5. To select a program, you need to set the PROGRAM handle to the appropriate position.

6. Washing temperature and speed can be set using the handle.

7. If desired, it is possible to enable additional functions.

8. Start the program using the START/PAUSE button, the indicator next to the START/PAUSE button will turn green.

9. To change the set washing cycle, switch the Indesit IWUC 4105 (CIS) F062918 washing machine to standby mode by pressing the START/PAUSE button and select a new cycle using the handle.

10. After the program has completed, the indicator on the Indesit IWUC 4105 (CIS) F062918 washing machine will light up.

11. As soon as the HATCH LOCK indicator goes out, you can open the hatch door and remove the laundry from the drum.

12. The hatch door must be left half open to dry the drum from moisture.

13. After washing, you must turn off the Indesit IWUC 4105 (CIS) F062918 washing machine by pressing the ON/OFF button.

As a result, we figured out how to turn on the Indesit IWUC 4105 (CIS) F062918 washing machine.

Read in full: Manual for washing machine IWUC 4105 (CIS) F062918 Indesit. Specifications…

Exploitation

In order for the Atlant washing machine to work as long as possible, it is necessary to follow the operating rules. They are simple, but the service life of the unit depends on them.

Cleaning

This procedure must be carried out regularly. It is advisable to carry out cleaning after completing each work process. To clean it safely, you should first disconnect it from the electrical network and close the water supply tap. Then thoroughly wipe all external surfaces. It is necessary to handle plastic and rubber parts only with a damp soft cloth. The contour seal can only be cleaned with a dry, soft cloth.

It is necessary to inspect the door seal, and if dirt has accumulated on it, this should also be removed. Then remove the dispenser tray and rinse its outer and inner parts under running warm water.

Carefully inspect the drum, and if there are rust stains left on it, transferred from clothing, they must be removed with means for cleaning stainless steel items. Do not use aggressive chemicals or abrasives for cleaning.

Cleaning filters in the water intake system

The machine has two filters: one in the supply hose, the other in the connecting pipe. They should be cleaned annually. It is necessary to rinse with a stream of running water using a brush.

Cleaning the pump filter

It is designed to protect the water path and pump from lint and threads torn from clothing. There may also be loose small objects in the drum, such as buttons or coins. The frequency of cleaning should be once every six months. In addition, the filter should be cleaned after each wash of fluffy items. To do this, you must first drain the water from the pump. Then remove the filter, remove debris from it and rinse with running water.

Some useful tips:

To prevent the machine from running away from its place during operation, and especially during spinning, it is recommended to place a rubber mat under it;
It is advisable not to use the maximum temperature mode. At high temperatures, scale may form. Especially if the water supply is of poor quality. To heat the water to the maximum temperature (90 degrees), additional time is needed. Considering that the power of the heating elements is 2500 W, during this time the contacts become very hot, which can lead to their overheating and, as a result, breakage. Frequent operation at elevated temperatures can also damage the relay in the heating element control circuit;
for the purpose of ventilation, after finishing washing, it is recommended to leave the loading hatch and the container for detergents open for a while;
Use only well-tested detergents.

Advantages and disadvantages of washing units

The Atlant washing machine has both positive and negative sides. The positive aspects include the following:

the washing machine has a moderate cost;
The Atlant washing machine is adapted to work in conditions of low-quality electricity and water supply;
In terms of reliability, the Atlant washing machine is not inferior to popular models from global companies;
The quality of washing is not inferior to the best foreign analogues. According to the existing classification, the Atlant washing machine is produced only in class “A”;
The Atlant washing machine is multifunctional. The software provides many functions allowing you to perform washing of any complexity;
The Atlant washing machine is designed for various categories of users. It has a very simple control scheme. The display and indication allow you to control the work process. The program menu is Russified;
During operation, the Atlant washing machine does not create increased noise. It is not ideal, but sufficient so as not to disturb the comfort of the apartment’s inhabitants;
Most models are economical. First of all, this applies to energy consumption indicators. However, not every Atlant washing machine is economical, and when purchasing, you need to be careful when choosing a model;
Models are produced that can be placed in small apartments. The depth of such machines does not exceed 32 cm;
the machine is easy to operate and can last for many years without repair;
the machine is protected against unauthorized access by children;
easy to repair, spare parts can be found in many shopping centers;
The machine has a function that starts working automatically when the drum is loaded. It is used to determine the weight of the loaded laundry.

The machine does not work well during the spin cycle. The waste liquid is discharged according to the class “D” standard, and this is one of the lowest indicators. The laundry does not dry completely. In addition, in some models the spin process causes significant vibrations of the entire body. This often leads to the unauthorized movement of the unit from its previous installation point;
motors are used only of the commutator type. They are inferior in durability and efficiency to inverter models. And this leads to additional energy consumption;
The machine does not have a foam sensor. This can lead to flooding and a number of other breakdowns;
design flaws. For example, opening a hatch causes water to splash onto the floor. Due to insufficient density, debris may get trapped between the drum and the fins.

In addition, the car has other minor but unpleasant shortcomings.

What should you pay attention to?

When starting up a Samsung washing machine for the first time, it is very important to monitor the entire washing cycle in order to identify problems in time.

Normal operation of the washing machine requires:

slow rotation of the drum during washing, accelerated during spinning;

heating the water in the drum seven minutes after switching on;

absence of leaks and extraneous sounds;

spinning and draining water without delay.

You should be wary:

strange sounds
grinding and knocking
digital signals appearing on the scoreboard,
incorrect operation of the selected washing program (for example, frequent draining of water),
body rattling during the spin process.

Operating modes

You have to wash various things, even those that require delicate handling when removing dirt manually. The software allows you to work with things made from various fabrics, wool and even leather.

Setting a particular function indicates the following types of washing:

cotton. This could be bed linen, towels and other everyday items. Water temperature can range from 60 to 95 degrees. It depends on the density of the fabric and the model of the item. The duration of the process ranges from 90-150 minutes;
synthetic fabrics. They are subject to deformation and shedding. Therefore, the software function sets the water temperature not exceeding 60 degrees. The process time is set within 110 minutes, and the spin is set to intense;
delicate. This mode allows you to process items made of silk, wool, cashmere and other fabrics. The process occurs at a water temperature of 40 degrees and lasts within 55-60 minutes. The drum rotates slowly and the spin is turned off;
preliminary. This mode is used when there is heavy contamination. To do this, the machine performs a pre-wash first and then a main wash. Before starting this function, it is necessary to pour powder into the second compartment of the dispenser;
intense. The operation of this function is accompanied by a liquid temperature of 95 degrees and a working process time of 120 minutes. It is used in cases where there is dirt, sand or very old stains on things;
fast. This treatment removes unpleasant odors and minor stains. It resembles a simple rinse. The process occurs at a water temperature of 30-40 degrees for 15-40 minutes;
baby clothes. This mode is used to process delicate baby items (diapers, baby vests, onesies). This consumes a large amount of water. This is designed to completely rinse off any remaining detergent. The time for removing powder residues is about 1.5 hours;
sports things. The process of this mode allows you to process all types of sportswear, including various models of training suits. In addition, even many models of sports shoes can be washed;
combined. This mode allows you to wash items without pre-sorting. The main thing is that among them there are no clothes that can fade;
night In order not to disturb the silence of the night, the mode provides for turning off all types of alarms and reducing noise during spinning;
"Biophase" mode. Very often, organic and protein stains left by wine, creams, blood, herbs and other substances can appear on clothing. It is very difficult to remove such stains. They can be removed in combination with powder and the appropriate enzyme in the “Biophase” mode;
easy ironing. This feature turns on a low spin cycle, so your clothes come out somewhat damp. This condition of clothes makes ironing easier;
rinsing. This mode cleans clothes from residual soap suds. Detergents are removed not only from the surface, but also from the internal structure of fabrics;
spin The disadvantages of this regime have already been noted. Therefore, in order for the laundry to come out as dry as possible, there is an option to turn on a second spin, which lasts within 5 minutes.

Preparing for work

After a general introduction, it’s time to answer the question - how to use the Atlant washing machine.

Connection

connection to the electrical network. First you need to make sure that the network parameters meet the current standard. First of all, this relates to the voltage level. If it differs from the passport conditions, then you need to think about installing a stabilizer. Otherwise, the machine may quickly fail. If the machine is connected via an extension cord, then you should remember that it must withstand power in the range of 2500-3000 W;
connection to the water supply network. Everything is simple here. Typically a plumbing tee is used for this. You just need to take into account that a cleaning filter and faucet must be installed along the flow of water. The length of the water hose does not matter;
sewer connection. To drain water, you can use two options: temporary or permanent connection. For temporary drainage, use a bathtub, sink or washbasin. For this, a special hose is used, the end of which resembles a hook. In this case, the height of rise of drain water should be within 60-90 cm.

For a permanent connection, a special intermediate drain siphon or the sewer siphon itself can be used. Connection diagrams are given in the operating instructions. It is very important to maintain the recommended distances when installing the drain. Otherwise, the water will not drain, or dirt from the drain hose may get inside the working housing.

Preparing the machine for washing

The quality of washing will depend on the correct choice of program and detergents. The mode is selected by turning the corresponding knob or pressing the required key. Typically, preparation for washing occurs in the following order:

load the laundry item. It should be remembered that the door must be tightly closed;
fill the appropriate dispenser cells with powder, bleach or rinse aid;
press the power button;
set the selected required operating mode;
press the “Start/Pause” button.

The work process will be reflected on the display. The software interface is written in Russian. Therefore, it is not difficult to control the workflow. The end of the work process is accompanied by an audible alarm.

A successful start, or how to properly start up a Samsung washing machine for the first time

A properly organized first launch of a Samsung washing machine is a guarantee that the household appliance will last as long as possible.
It is not enough to simply press the start button. In order for the washing machine to please you with the quality of washing, you need to prepare correctly: check the connection of the device, select the required program and temperature mode.

By strictly following the sequence of actions and following all the instructions for the first start-up, you can be sure that the desired purchase - a Samsung washing machine - will last a long time, delighting you with the cleanliness and freshness of the washed clothes.

Exploitation

In order for the Atlant washing machine to work as long as possible, it is necessary to follow the operating rules. They are simple, but the service life of the unit depends on them.

Cleaning

It is necessary to inspect the door seal, and if dirt has accumulated on it, this should also be removed. Then remove the dispenser tray and rinse its outer and inner parts under running warm water.

Cleaning filters in the water intake system

The machine has two filters: one in the supply hose, the other in the connecting pipe. They should be cleaned annually. It is necessary to rinse with a stream of running water using a brush.

Cleaning the pump filter

Some useful tips:

To prevent the machine from running away from its place during operation, and especially during spinning, it is recommended to place a rubber mat under it;
It is advisable not to use the maximum temperature mode. At high temperatures, scale may form. Especially if the water supply is of poor quality. To heat the water to the maximum temperature (90 degrees), additional time is needed. Considering that the power of the heating elements is 2500 W, during this time the contacts become very hot, which can lead to their overheating and, as a result, breakage. Frequent operation at elevated temperatures can also damage the relay in the heating element control circuit;
for the purpose of ventilation, after finishing washing, it is recommended to leave the loading hatch and the container for detergents open for a while;
Use only well-tested detergents.

Do I need to add detergent?

There are several recommendations to follow when choosing a detergent for the first launch:

If ordinary washing powder is poured into the powder receptacle, it is important that the package is marked “automatic”.

The thing is that hand washing powders are characterized by increased foaming, which can lead to damage to the household appliance. As an option, you can use a special product that effectively removes technical dirt and foreign odors - Helfer Start HLR0054.

For the first launch, one package of this tool is enough. It is poured into the powder receptacle in the main wash compartment.

For the first test wash, use a minimum amount of regular washing powder (less than half the norm).