The most fashionable and favorite accessory for any person is a wristwatch. Wearing a watch every day leads to rapid contamination of the watch itself from hand skin secretions, dust from clothing and street fumes.
Cleaning the watch mechanism should be entrusted to a master, but the bracelet can be put in order yourself.
A leather strap is cleaned with a soapy solution; to do this, pour liquid soap into a small container, a few drops of ammonia and dilute with warm water. A cotton pad is moistened in this solution and the surface of the strap is wiped on both sides. The soap is washed off with a damp, clean cloth, blotted with a cotton cloth and the strap is allowed to dry.
A more contaminated strap can be cleaned using a paste of soda and water. Apply the mixture to contaminated areas of the leather bracelet and leave for an hour. Then gently clean with a cotton pad, wipe with a damp cloth and again allow to dry. To prevent the skin from becoming hard after drying, rub a few drops of glycerin into it.
Light leather bracelets are cleaned with egg white diluted in a glass of milk. A cotton swab is moistened with this composition and the surface of the strap is treated. This method allows you not only to clean off dirt, but also to preserve the color of the bracelet.
Fabric bracelets are cleaned with a toothbrush in warm water and dishwashing liquid. After rubbing the dirty areas, rinse the strap under running water, pat dry with a towel, and then dry on a flat surface.
A silver bracelet can be cleaned with a mixture of ammonia and soda. Apply the prepared mixture to the metal and wait 30 minutes, then wipe with a damp cloth and polish with a microfiber cloth. There is no need to rub the mixture into the bracelet; soda can scratch the metal.
As a result of daily wear, the bracelet naturally becomes dirty. You can, of course, replace it with a new one. You can also spend a little time and put it in order yourself or go to a watch workshop.
Cleaning a regular metal bracelet
The most gentle way to clean a bracelet is to use vinegar and soda. They are mixed in equal proportions to the consistency of thick sour cream. Using a brush with the applied mixture, carefully clean the surface of the bracelet, connecting elements and clasp. If the bracelet has stones, you should choose a softer brush.
For the next method of sedum, you need to purchase foil. It is placed at the bottom of any container. Place a bracelet on top and sprinkle with a small amount of soda. This is all poured with hot water and left for 15-20 minutes. Then the bracelet should be washed and dried with a soft cloth.
To prevent the bracelet from becoming too dirty, you should periodically clean it with warm water and dishwashing detergent. It is especially effective to carry out such procedures in the hot season.
Cleaning leather and fabric straps
For high-quality cleaning, you need to mix a small amount of liquid soap with warm water. Adding a few drops of ammonia to the solution also gives a good effect. Using a cloth, wipe the strap well with the resulting solution. After finishing the treatment, remove soap residues using a damp cloth.
If your white leather bracelet has lost its original appearance, do not despair. Using one egg white diluted in a glass of milk, you can restore its color, while also cleaning the strap from dirt.
A fabric bracelet can be cleaned well with warm water and dishwashing liquid. If the bracelet is heavily soiled, an old toothbrush will also come in handy.
Cleaning a bracelet made of precious materials
If you have a silver watch, you can also tidy it up at home. Prepare a mixture of toothpaste (without abrasive particles), ammonia and baking soda. Apply it with a brush to the bracelet and leave for half an hour. Then, without scratching the bracelet, carefully remove the mixture with a napkin and polish with a soft cloth.
A natural gold bracelet can be restored to shine using regular cosmetic powder. Use a soft cloth with powder applied to polish the product. If powder is not available, it can be replaced with baby powder or crushed chalk chips.
An accessory such as a watch does not become obsolete and continues to be one of the most popular jewelry that has a useful option. We don't usually separate them into parts, but the movement and strap have different lifespans. If the first one can work properly for many years, then belts or bracelets last only 3-4 years. Then you will need to buy a watch bracelet that matches the mechanism. You can do this profitably in Correa’s online store.
To make a new strap last longer, you need to periodically clean it from dust and dirt. Long-term contact with the skin of the hands leaves particles of skin, sweat and other pollutants on the watch. Different materials require different cleaning products and methods.
Most often, leather (natural and artificial) and metal are used for bracelets.
There are several ways to clean a leather strap. The first is with a special means. They are sold in household chemicals or shoe stores. Home remedies are also suitable for use if you don’t have time to go shopping:
- Mix 500 ml of water, a couple of drops of shampoo and 1 tbsp. a spoonful of ammonia. Wipe the surface with this mixture and wipe dry.
- Soak a cotton pad or cloth in lemon juice and wipe.
- A mixture of a glass of milk and one egg white will help restore the whiteness of a white leather bracelet. A cloth or cotton pad is moistened with this liquid and the product is wiped, returning it to both purity and brightness of color.
Sometimes gasoline or alcohol is used for cleaning, but these substances are unsafe. Especially for eco-leather. Therefore, if you are not sure that this is a natural material, it is better to refuse such products.
Regular glycerin will help restore your skin's former shine. You just need to wipe the belt with a sponge or cloth soaked in liquid. Softness, smoothness and shine are guaranteed.
Cleaning metal bracelets at home is also possible. If it can be disconnected, then the following solutions are used for cleaning:
- Water with shampoo. They are immersed in the liquid for 30 minutes, then the links are cleaned with an old toothbrush or cotton swabs. Afterwards, rinse under running water and wipe dry.
- Roll up a bowl of aluminum foil. Place the bracelet in it, add baking soda and add hot water. After 20 minutes, wash and wipe dry.
If you have a silver watch, then you can use toothpaste without abrasive particles for cleaning. You need to leave it for 30 minutes, carefully walk over the surface with a soft toothbrush and remove it. Polish with a soft cloth, preferably natural wool. Regular powder from a woman's cosmetic bag will help restore the shine to a gold bracelet. It is applied to soft material and the surface is polished. Baby talc is also suitable.
Belts made of plastic, silicone and rubber are the least capricious when it comes to cleaning. You can simply wash them with soap and water and they are good as new again. Fabric models can be easily cleaned with regular dishwashing detergent.
Read also:
Every gardener and gardener knows how important it is to use fertilizers and plant nutrients. Thanks to the use of special tools, productivity can increase significantly. At the same time, the plants themselves grow healthy and are less susceptible to disease. But to get the most effective results, it is very important to use natural fertilizers. Which contain natural ingredients. If they use...
The hour of basic, universal beauty treatments and beauty salons for people has already passed. No, of course, those who run such salons themselves, but most of the current people give precedence to the so-called barbershops. This perukarni de serve inclusively the special human status, and maistry - barbery, it is evident not only in haircuts on the head, but also in haircuts with unsafe razors, and haircuts with…
Hepatitis C is one of the most common diseases of our century. According to the World Health Organization, 56% of the world's population suffers from this disease. One of the common types of this disease is alcoholic hepatitis. It is also called free will disease because it develops due to excessive alcohol consumption. Alcoholic hepatitis develops as a result of sequential…
A diagnosis of hepatitis C radically changes a person’s life - from thinking to lifestyle. However, one should not fall into despair, since modern medicine has made great strides forward, and therefore a person has every chance of stopping the development of the disease or even completely defeating it. Not long ago, effective medications for hepatitis were developed, which you can find out about here https://sof-dak.c...
A steel bracelet gets dirty much less than a leather or braid bracelet. But sooner or later it still loses its presentation and requires minimal care. Paint may get on the bracelet, or the “hollows” of the bracelet may simply darken due to the accumulation of grease and dirt. Such little things terribly spoil the appearance of an expensive watch of a prestigious brand, and it’s very easy to fix it!
How to tidy up a leather strap?
Leather straps are popular. Caring for them will not be difficult if you do it regularly.
As with a metal bracelet, a soap solution will do the trick. To enhance the effect, you can add a little ammonia. This mixture should be applied to a cotton pad and used to clean the accessory. Then it should be washed off - it is convenient to use wet wipes for this - and dried with a towel. After which it is recommended to lubricate the product with a small amount of olive oil. This measure will help soften the skin and protect it.
To clean a white leather watch bracelet, you can use egg and milk. To do this, stir the protein in a glass of drink, after which the strap is treated with a cotton swab. In this way, two goals are achieved: impurities are removed and the original radiant appearance is restored.
A bracelet made of fabric must also be maintained in order. It is easy to care for: you need to wash it in water with soap or any other detergent added, and clean particularly dirty areas with a toothbrush.
How to clean a steel watch bracelet?
It all depends on the type of pollution. If paint
- use solvent or kerosene: wipe the stain with a cloth soaked in solvent until it disappears, and then wipe with a damp cloth to remove the smell of kerosene.
To remove grease and dirt
use means:
- Dish detergent, laundry soap or shampoo. Remove the bracelet from the watch and leave it in the solution for 20 minutes. Soaked and softened dirt can now be easily removed with a soft cloth or toothbrush. After wiping, the watch should also be wiped with a damp cloth and polished dry.
- A good way to remove dried-on greasy dirt from the small holes of a woven bracelet is to leave it in a solution of baking soda and water for 20 minutes. The soda will dissolve the grease, and dirty stains can be washed under running water. After the procedure, the watch should be wiped dry.
- A 1:1 mixture of baking soda and vinegar is a fairly strong product suitable for any metals: stainless steel, silver and gold, among others. Moisten a toothbrush in the product and clean out dirt from the bracelet. No need to soak.
- Another working solution is a mixture of ammonia and vodka in half. The bracelet is soaked for 5 minutes, or wiped with a toothbrush.
How to wear All-Black and Total White watches?
White and black are the dominant colors in ceramic wristwatches. The Total Wight and All-Black models are especially popular. This is an all white and all black watch. These colors are sophisticated classics, universal for people of any age and style.
A white ceramic watch is a catchy but discreet accessory. Ideal for warm weather and minimal clothing. Looks great on a tanned hand. But even in cold weather, such a watch will become a stylish detail for a business suit or evening dress. A good move is playing in contrast. White watches go with dark, rich shades of clothing. And it doesn't have to be black. Combine white with dark green, deep blue or burgundy.
An all-black watch is the object of desire for many fashionistas. For a long time, such watches were considered a luxury. They were made only by luxury brands. But modern technologies, including innovative ceramics, have made it possible to make All-Black watches in more affordable models. Such watches are not striking, but they will definitely be remembered.
Watch brands also create wristwatches in delicate pastel shades. Models in gray and blue shades are especially popular. Combined ceramics plus metal in silver and gold shades look special on the hand.
Choose according to your taste. If for some reason you are still nervous about buying a fully ceramic watch, you can always buy a partially ceramic one. For example, a watch with a ceramic bracelet, with a ceramic coating or with a ceramic case. In style they can be anything from sports to classics.
Here are a few models from the TIMEBAR store.
Things to remember
You cannot soak the bracelet for a long time: not every coating will react happily to this. It may change color or fade.
Also, do not clean the bracelet with abrasive agents: undissolved soda, sand, etc. This can scratch or erase the bracelet's protective coating.
If the watch is expensive and you are afraid to take risks, then it is better to take the watch to a service center: the dirt will be treated with an ultrasonic cleaner, and the stains will be safely removed. In addition, it can be difficult to remove the bracelet from the watch yourself, and soaking the bracelet together with the watch is strictly forbidden.
Despite the fact that gold itself is not prone to oxidation and, accordingly, changes in color and texture, jewelry made from it can darken and become coated over time - this is due to the presence of various additives in the metal. In addition, jewelry worn on the body gets dirty simply during use. To return them to a shiny appearance in every sense, it is necessary to periodically clean the surface. How and with what to clean a gold bracelet or earrings will be discussed in this article.
How to clean a gold bracelet at home
What should you not clean at home?
The resistance of gold as such to various chemically active substances does not apply to inserts in jewelry: precious and semi-precious stones, enamel, mother-of-pearl, and other metals. Therefore, it is better to have combined products professionally cleaned - this significantly reduces the risk of damage to the item. In addition, if the surface has become dull not from dirt, but from scratches or abrasions, it is better to think not about how to clean a gold bracelet at home, but to take the product to a jewelry workshop for polishing.
How to slow down the tarnishing process of silver?
In order not to fool yourself about how to clean a silver chain at home, you should prevent it from quickly darkening. In order for the chain to remain shiny for a long time, you should adhere to a few basic rules.
18.01.2018
2
42
Nowadays it is easy to purchase costume jewelry that is indistinguishable from genuine expensive jewelry. The only disadvantage of the purchase is that it quickly deteriorates and loses its original beauty. How to clean jewelry from darkening at home? There are many ways and they all require a careful approach. With these proven methods, you'll be able to treasure your most beautiful earrings, rings and pendants for a long time.
Jewelry is usually made from copper, glass, stones, and plastic. If they make jewelry for silver, they use different alloys; if they make jewelry for gold, they use coated metal. Before you start cleaning, it is important to determine what the accessory is made of. Each material has its own method. One is negatively affected by moisture, the other by abrasives.
