How to starch a cap at home?

Starch

Almost every fashionista has such a stylish headdress as a cap or baseball cap. During wear, the item may become deformed, only the visor remains in the same condition. Therefore, the question “How to starch a hat and straighten a cap after washing?” is relevant.

If after washing the product has lost its shape, you can use potato starch. It can be replaced with corn or rice.

There are three degrees of starching:

Low (1 tsp per 1 liter of water) is used for a panama hat or beach hat. The headdress will keep its shape until the first rain. It should not be worn on wet hair after visiting the sea, otherwise it will immediately become deformed. Children's hats with brims can be treated in this starching solution.
Medium (1 tbsp per 1 liter of water) is suitable for caps and beach hats. If you use such a solution, the product will hold its shape better and longer.
A high (2 tablespoons per 1 liter of water) degree of starch is suitable if you need to straighten a military cap or knitted panama hat. This method will give the product the correct shape for a long time. If a woman has knitted a hat and wants to stiffen it, use this method.

First you need to get rid of the stains. After the woman has washed the headdress, it is dried and, if necessary, one of the methods is used.

How to return a product to its original appearance - step-by-step guide:

Having prepared the solution, it needs to cool to room temperature, then lower the things one by one. A cap and baseball cap are dipped into the solution without a visor.
Allow to soak in the starch a little, 5–10 minutes is enough.
Then take it out and gently squeeze out the excess liquid with your hand.

The hat was processed, a cap, a baseball cap or a Panama hat - it doesn’t matter. Any headgear needs to be straightened after this procedure.

The starched cap must be carefully smoothed with your hands and put on a jar of a suitable size. This way it will be possible to restore its shape and the product will not lose it the first time it is worn.

A hat with a wide brim will need to be smoothed and pressed tightly. After drying, the field must be ironed.

Do not remove the cap from the jar until it is completely dry. Then the starched item will delight you with its appearance for a long time.

How to smooth out a wrinkled cap

To ensure that the baseball cap does not lose its shape after washing, you need to know how to straighten it correctly. To do this, you will need to put the headdress on a suitable object and leave it in this position until it dries completely. Such a frame can be: a ball, a balloon, a pan, or an inverted three-liter glass jar. To prevent damage to the visor, place the cap in any deep dish or pan lid. Thus, the baseball cap can not only be returned to its original appearance, but also smoothed out.

Using simple rules, restoring and maintaining a baseball cap in proper condition is not difficult. With proper cleaning and drying, your item will always look like new; these methods will extend the life of any hat!

PVA glue

If there is no starch in the house, the store is already closed, and you need a hat in the morning, don’t panic. There is a way out. Use regular PVA glue.

This method is suitable for both knitted items and caps and baseball caps.

Restoring the headdress:

The glue is diluted with water in a 1:1 ratio. The amount of water depends on the quality of the glue.
The headdress is placed in a container and allowed to soak a little. The procedure takes 10–15 minutes.
Then the excess liquid is squeezed out and the cap is sent to dry.
They dry it by placing it on a three-liter bottle or a special blank, straightening the brim.
The edges are ironed if they are wide and the material allows (look at the label).

Wearing a hat in the rain is not recommended. If moisture gets on the product, it will ruin all the results of your work.

This method is only suitable for light-colored and crocheted hats.

If a woman has previously starched in this way, she should remember that PVA glue cannot be used on dark hats. There may be streaks left that will become noticeable after drying.

How to straighten out the army (military)?

Ironing an army cap allows you to straighten the fabric, which will make the item look aesthetically pleasing and neat.

The soft fabric allows you to stretch it over the tapered edge of the ironing board . Turning it so as to iron the item from all sides, it is ironed using steam.

To prevent a freshly ironed item from becoming wrinkled, it is advisable to give it time to cool and only then put it on.

Another way to restore the shape of an army cap is in the video:

Beer

The military beret is shaped using regular light beer. It is poured into a basin and the headdress is placed there.

After 30 minutes, the beret is wrung out from the remaining beer and put on, having previously been smoothed. Already on the head they give it a shape and walk like this for another half hour.

This is a slightly strange way to regain shape, but very effective.

After half an hour, the beret is placed on the shelf until it is completely dry.

What is a beat?

Initially, the cap holds its shape well, but may lose it after the first wash, so beating is a popular restoration method. The process involves the use of various tools and compounds to restore the rigidity of the structure. Beating the cap can be done using starch, an ordinary iron, sweet water and other substances.

The techniques are not complicated, so any of them can be used at home. As a rule, the soft part of the headdress is deformed; the visor rarely changes shape. Processing the material takes from 30 minutes to several hours (depending on the chosen method). All straightening methods are accessible, the main thing is to follow the sequence of actions, only then the knowledge of how to knock off an army cap will bring a positive result.

Beating allows you to return the headdress to its original shape

Machine washable

A baseball cap made of high-quality fabric and without inserts can be washed in a washing machine. Basic recommendations:

the temperature should not be higher than 30 degrees;
use a gentle powder (for example, children's) or gel;
It is better to refuse the spin function;
a washed cap can be starched (dipped in a solution of 1 liter of water and 3 tablespoons of starch);
drying should take place in the open air, using a “blank”.

Washing powder must be chlorine-free.

For models of baseball caps with hard inserts, it is better to use a dishwasher. The technique of its operation allows you to clean the fabric effectively, but gently, without deformation. Recommendations:

use a gel detergent suitable for the machine (it effectively removes difficult stains, including grease);
the cap should be on the highest tier;
the temperature should not be higher than 30 degrees;
After washing, the headdress should be blotted with a terry towel and dried in the open air.

Restoring the headdress after washing

To ensure that the baseball cap does not lose its shape after washing, it is important to know how to properly align it. To do this, you need to put the headdress on a suitable object and leave it in this position until it dries completely.

Such a frame will be: a ball, a balloon, a saucepan or an inverted three-liter glass jar. To prevent damage to the casting, place the cap in any deep dish or pan lid. Likewise, a baseball cap can not only be returned to its original appearance, but also smoothed out.

Using simple rules, reconstructing and maintaining a baseball cap in proper form is not difficult. With proper cleaning and drying, your item will always look like new; these methods will extend the life of any hat!

Almost every fashionista has such a stylish headdress as a cap or baseball cap. During wear, the item can change its shape, only the ebb remains in the same state. Thanks to this, the question “How to starch a hat and straighten a cap after washing?” is important.

If after washing the product has lost its shape, you can use potato starch. It can be replaced with corn or rice.

There are three degrees of starching:

Low (1 tsp per 1 liter of water) is used for a panama hat or beach hat. The headdress will keep its shape until the first rain. It cannot be worn on wet hair after visiting the sea, otherwise it will immediately become deformed. Children's hats with brims can be treated in this starching solution.
Medium (1 tbsp per 1 liter of water) is suitable for caps and beach panama hats. If you use a solution of this type, the product will keep its shape better and last longer.
A high (2 tablespoons per 1 liter of water) degree of starch is suitable if you need to line a military cap or a knitted panama hat. This method will add the correct shape to the product for a long time. If a representative of the fair sex has knitted a hat and wants to stiffen it, this method is used.

First of all, you need to get rid of stains. As soon as the fair sex has washed the headdress, it is dried, and if necessary, one of the methods is used.

How to return a product to its previous appearance - a detailed guide:

Having prepared the solution, it needs to cool to home temperature, then lower the items alternately. The cap and baseball cap are dipped into the solution without tide.
Let it soak in the starch a little, 5-10 minutes is enough.
Then they take it out and carefully squeeze out the additional liquid with your hand.

The hat was processed, a cap, a baseball cap or a Panama hat - it doesn’t matter. Any headgear must be straightened after this procedure.

The starched cap must be carefully smoothed with your hands and placed on the jar of the desired size. In this way, the shape will be reconstructed and the product will not lose it the first time it is worn.

A hat with a wide brim will need to be smoothed and pressed tightly. After drying, the field should be ironed.

You cannot remove the cap from the jar until it dries completely. Then the starched item will delight you with its appearance for a long time.

If there is no starch in the house, the store is already closed, and you will need a hat in the morning, do not lose self-control. There is a way out. Use ordinary PVA glue.

This method is suitable for both knitted items and caps and baseball caps.

Restoring the headdress:

The glue is diluted with water in a 1:1 ratio. The amount of water depends on the quality of the glue.
The headdress is placed in a container and allowed to soak a little. The procedure takes 10–15 minutes.
Then the additional liquid is squeezed out and the cap is sent out to dry.
They dry it by placing it on a three-liter bottle or a specialized blank, straightening the margins.
The edges are ironed if they are wide and the material allows it (look at the tag).

Wearing a hat in the rain is not recommended. Penetration of moisture into the product will damage all results of labor.

This method is only suitable for light-colored and crocheted hats.

If a representative of the fair sex has starched with this option before, she should not forget that polyvinyl acetate glue cannot be used on dark hats. There are stains left that will become visible after drying.

The military beret is shaped using ordinary light beer. It is poured into a basin and the headdress is placed there.

After half an hour, the beret is squeezed out of the remaining beer and put on, having been smoothed in advance. Already on the head they give it a shape and walk like this for another 30 minutes.

This is a slightly incomprehensible way to restore shape, but highly effective.

After 30 minutes, the beret is placed on a shelf until it dries completely.

How to dry a cap to get its shape back

So that the shape of the headdress remains unchanged after cleaning. Some rules should be followed:

Regardless of the type of fabric, the cap should not be wrung out or deformed.
After washing, you need to leave it over the sink or bathtub for a while to let the water drain.
Then pat dry with a soft, light terry towel.
Pull the wet accessory onto a suitable blank. You can use a three-liter jar, an inverted pan, a rubber ball or a balloon.

Caps are not ironed, but it is acceptable to use a steamer.