How to clean an iron from scale: inside and outside, solutions, products, self-cleaning, reviews

Features of descaling iron

You can clean your iron from scale in many ways - with specialized powerful products or household household substances. But in any case, when carrying out the procedure, you should adhere to important rules:

The device should be cleaned regularly, at the first sign of scale appearing on its soles. The thinner the layer of lime deposits, the easier it will be to clean the device.
In order to clean the sole of the device, you must use liquid solutions or gels. It is strictly not recommended to rub the sole with abrasive powders; microscopic scratches will remain on it.
It is forbidden to clean dirt from the surface with a knife; the blade will also leave numerous abrasions, due to which the quality of ironing will noticeably deteriorate.
You can only remove scale from the cold base of the device; if the Teflon or metal coating is still warm, attempts to clean the surface will only lead to the formation of new dirt that is difficult to remove.
After cleaning, the iron should be washed very thoroughly with a clean, damp sponge and allowed to dry completely. If you plug in an appliance with a wet soleplate or cleaning agent residue lingering on it, this will damage the iron itself.

Important! Even if significant scale has accumulated on the device, you should first use gentle methods to clean it. Only if they do not produce results can we move on to more drastic measures.

Aspirin and dish soap

Aspirin or acetylsalicylic acid, it turns out, is successfully used not only for medicinal purposes, but also as a means for descaling household appliances.

Prepare a package of aspirin tablets, crush them to a powder and pour into a small container.
Add a few drops of dishwashing detergent to the powder. You can use liquid soap instead.
Add a little water, stir everything well.
Pour the resulting mixture into a water container and use as in previous recipes.

If cleaning is not very successful, repeat the procedure. Finally, rinse the iron system thoroughly with water.

How to clean the inside of an iron from scale using traditional methods

If the iron is equipped with a steam generator, then it is only a matter of time before scale appears inside it. Steam is formed during the boiling process of water in a special tank, and even if the water is of very high quality, over time it will still leave a solid residue on the walls of the tank. You can clean the iron steamer from scale without disassembling the device; just pour a special product into the steam generator that dissolves deposits well.

How to remove scale from an iron with vinegar

An excellent household product for cleaning scale is table vinegar with a concentration of 9%. The solution allows you to cope even with old deposits and helps clean minor formations.

You can descale your iron at home using vinegar as follows:

Half a glass of table vinegar is diluted with an equal amount of filtered water.
The solution is poured into the steam generator tank, approximately 1/3 of the capacity; there is no need to fill the container completely.
The iron is placed vertically, plugged into an outlet, and then the maximum power of the device is set to strongly heat the sole.
The device is kept in this mode for about 10 minutes.

After the time has passed, you need to place a basin under the sole of the device and press the steam button. After all the vinegar water has drained out, you will need to fill the container with ordinary clean water and repeat the entire procedure from the beginning, this is necessary to remove any remaining vinegar from the reservoir.

The cleaned iron is unplugged from the outlet and wait until the sole has cooled completely. After this, wipe it with a dry cloth and do not use the device for some more time; you need to wait until the water even inside is completely dry.

How to remove scale from an iron with citric acid

Another effective solvent for cleaning the internal system is citric acid. Due to its caustic composition, it perfectly dissolves solid deposits and helps prevent device damage or deterioration in performance:

To clean the iron with citric acid, you need to pour 25 g of powder into a glass of hot water and stir thoroughly.
After this, the liquid is poured into the reservoir without filling it to the top, the device is plugged into an outlet and installed vertically.
At maximum power, the device is heated for 10 minutes, and then steam and liquid are released from the reservoir into a substitute container.

After all the lemon solution has flowed out, the tank will need to be filled with filtered clean water and repeat the procedure again. If you do not do this, acid residues may linger in the tank, and then the clothes will be damaged during the next ironing session.

Soda, citric and acetic acid

If significant scale deposits have accumulated on the walls of the iron container, you can use comprehensive cleaning.

For the procedure, prepare soda, citric and acetic acid. This cleaning will take a lot of time.

First, prepare a soda solution: dissolve a tablespoon of soda in a glass of warm filtered water. Pour the solution into a water reservoir and turn on the iron for 20 minutes at the optimal temperature.
Then activate the steaming mode by pressing the button, placing a basin under the device. The soda solution with steam and pieces of lime deposits will come out through the holes in the sole.
Then do the same using a solution of citric acid. To do this, dissolve 25 grams of acid in a cup of water.
Finish cleaning with acetic acid. To do this, mix acetic acid and water in equal proportions in a glass of water. After cleaning the iron three times, all that remains is to rinse the electrical system with water.

How to clean the outside of an iron from scale using traditional methods

The listed methods allow you to effectively clean scale in the internal system of an iron with a steam generator. However, solid deposits also settle on the outer parts of the device - on the sole and in the holes through which hot steam escapes. To clean the soleplate of your iron from scale, you can also use household products using proven algorithms.

How to remove scale from an iron with soda

Baking soda is an effective cleaning agent; it is used not only in cooking, but also when it is necessary to clean old dirt on household appliances. Soda perfectly dissolves limescale and scale, and when diluted with water it becomes very soft and does not leave scratches on hard surfaces.

You can clean your iron using powder like this:

1 small spoon of soda is diluted in a large spoon of water;
mix the ingredients thoroughly until the paste becomes completely homogeneous;
Soda is applied to a cotton swab or disk and the sole is treated with gentle circular movements.

Recommended reading: How to remove double-sided tape from glass and marks from it

To achieve the best effect, it is advisable to leave the soda on the sole of the device for 15-20 minutes. After this, wipe the iron with a clean damp sponge and then with a dry soft cloth. Throughout the entire procedure, the device must be completely cold; in this case, heating it is prohibited.

Attention! To prevent the soda from harming the sole of the device, you need to distribute it over the surface very carefully and do not rub it in, but rather spread the mixture. It is important that the soda slurry is soft and without any hard inclusions.

How to descale an iron with salt

Regular salt is a good solvent and cleaning agent. It can also be used to clean your iron, although the procedure will be slightly different from the traditional one:

To remove scale from the outer surface of the device, salt is poured in an even layer onto a sheet of thick paper.
Place gauze on top, folded in a couple of layers, and smooth it out properly to create a smooth surface.
After this, the iron is heated and the hot sole is moved with light movements over gauze with a salt “backing” for several minutes.

Salt, when heated, even through gauze, affects deposits on the surface of the device and allows you to get rid of scale. A video on how to descale an iron confirms that it is not recommended to press the device tightly against gauze, much less treat it with salt without additional protection; hard crystals will leave scratches on the sole of the device.

Another option for using salt is to prepare a caustic solution using vinegar:

Salt powder and table vinegar are mixed in equal proportions and wait until the salt is completely dissolved.
Then soak a cotton swab or soft brush in the solution and carefully treat the surface of the device.
At the last stage, the iron is washed with a damp sponge and wiped dry with a clean cloth.

You can clean the holes in the iron from scale separately using a cotton swab.

How to descale a steam iron with laundry soap

Deposits on a steam iron can be cleaned using laundry soap, which perfectly dissolves complex contaminants, including scale. There are two ways to clean the device:

grate a bar of soap on a fine grater and generously sprinkle the base of the household appliance with the resulting shavings;
Simply rub the sole of the device with soap until it forms a thin layer.

In both cases, the iron treated with soap must be plugged in, set to the minimum heating temperature and wait until the laundry soap softens.

The structure of scale under the influence of hot soap will become less stable. After the base of the device has cooled, you will need to clean it carefully, but forcefully, with a soft cloth. Then the iron is washed several times with a damp, clean sponge, the holes on the sole are properly treated with toothpicks or cotton swabs, and the surface of the device is wiped dry with a cloth.

How to clean an iron from burnt-on scale with toothpaste

Toothpaste is a fairly effective cleaning agent that can be used to clean an iron with scale holes. It is used like this:

a small amount of paste is applied to a cotton swab or a soft-bristle brush;
distribute the cleaning agent evenly over the surface of the device, paying special attention to the steam holes;
plug it in, warm it up properly, and iron a piece of unnecessary cotton fabric together with the paste.

After this, you need to turn off the iron, wait for it to cool down and clean the lower part of the device with soapy water. You will also need to rinse off the soap with a dampened sponge; remove the remaining paste from the holes using a cotton swab. The cleanly washed iron is wiped dry with a soft cloth.

Advice! After cleaning, it is not recommended to immediately iron valuable clothing. First, you should walk a clean sole over a regular rag and make sure that the device is washed thoroughly and does not leave marks on the fabric.

How to clean the soleplate of an iron from scale with vinegar

Teflon or ceramic irons can be successfully descaled using table vinegar with a concentration of 9%. If we are talking about cleaning the outer surface of the appliance, vinegar should not be poured into the steam tank; external cleaning will be sufficient:

Vinegar is mixed with water in equal quantities to reduce the concentration of the product.
Moisten a sponge or rag in the resulting solution and wipe the cold surface of the device thoroughly.
Then leave the iron for 5 minutes, and then wipe the soleplate again with a vinegar solution and try to clean the holes with cotton swabs.

The cleaned device must be wiped several times with a cloth soaked in plain clean water. If traces of vinegar remain on the surface of the device, the device may leave stains on clothing the next time you iron it.

To clean the device, you should only use a vinegar solution diluted with water, and even then, you should wear rubber gloves to protect your skin. It is advisable to cover your face with a mask, since vinegar vapors are quite caustic and can cause harm if inhaled.

How to properly descale an iron with hydrogen peroxide

An excellent cleaning solution is simple hydrogen peroxide, which is found in almost any home medicine cabinet. The antiseptic solution has pronounced cleansing properties and copes well with dense scale on household appliances.

In order to clean the iron, you just need to pour hydrogen peroxide on a cotton pad and rub the cold sole of the device thoroughly, and treat the steam holes with a cotton swab. You need to continue processing until the scale is gone and the surface is completely clean.

After this, the iron is plugged in, warmed up, and the unnecessary clean fabric is ironed. When the sole of the device has cooled, wash it with a weak soap solution and clean water, then wipe the device dry with a soft cloth.

How to clean scale from the soleplate of an iron with acetone

If you decide to clean the iron for the first time in a long time, and the scale deposits on its lower surface are very dense, you can use strong household solvents. For example, acetone or nail polish remover containing this substance has a good effect.

We recommend reading: How to sew up a hole in jeans between your legs: repairing pants at home

You need to soak a soft rag or cotton pad in the solvent, and then rub the sole of the device for several minutes until the scale comes off completely. Then the iron must be washed very thoroughly with a damp sponge and wiped dry.

Before use, the device must be tested on an unnecessary rag. This will ensure that the acetone is completely washed off and will not leave unwanted marks on the clothes during the ironing process.

A mixture of citric acid, soda and vinegar

To prepare the mixture you will need citric acid, soda and vinegar.

Prepare a small container. Pour 2 tablespoons of citric acid, 2 tablespoons of baking soda and 1 tablespoon of vinegar into it. Mix all ingredients thoroughly.
The iron does not need to be heated before the cleaning process.
Soak a rag generously in the product and spread it on a plastic bag.
Place the iron, sole down, on a cloth and leave for an hour.
After this, use a sponge to clean the softened burnt residue from the ironing surface.
Use toothpicks or cotton swabs to clean the steam holes.

After cleaning, wash the soleplate of the iron with clean water and wipe with a dry cloth.

How to clean a steam iron from scale using specialized products

Even powerful home remedies do not always help remove old and stubborn scale. If traditional methods have not brought any effect, and the base of the device is still covered with lime deposits and carbon deposits, it makes sense to resort to powerful commercial products.

Antiscale

The cheap powder has a very aggressive composition and is perfect for descaling any household appliances. To clean the iron, you need to dilute the powder in clean hot water according to the instructions on the package, then soak a rag in the iron scale solution and thoroughly treat the surface of the device.

After this, the surface is washed several times with a wet sponge and wiped dry, and before use, test ironing of an unnecessary piece of fabric is carried out. Antiscale solution for irons can also be used to remove scale from the walls of a water tank; in this case, the liquid is poured into the tank, the iron is heated as much as possible, and then turned off and left for half an hour.

Liquid Topper

A modern liquid descaler for cleaning the inside of an iron helps clean even the most difficult deposits. In the proportion specified by the manufacturer, the chemical solution is diluted with water and then poured into the steam generator or the surface of the device is properly wiped.

In the first case, the iron will need to be heated to maximum values, left for 2 hours, then heated again and released water and steam over the prepared container, having first unplugged the device from the outlet.

Important! When using caustic liquids to descale an iron, the procedure should be carried out with rubber gloves and under no circumstances should you inhale the solution vapors.

Iron cleaning pencil

An unusual cleaning product such as a special pencil helps get rid of scale. It is a solid rod in the shape of a long candle, which contains caustic acids and urea. Using the device is very easy - you need to heat the iron as much as possible, and then carefully clean its soleplate with a pencil.

Under the influence of high temperature, the pencil will begin to melt, and the acids in its composition will interact with soot and scale and weaken the structure of the contaminants. Usually 2-3 treatments are enough to restore the sole cleanliness and shine. An important advantage of the pencil is that it does not scratch the surface of the device at all.

Pills

Iron tablets that remove scale show a good effect. They must be dissolved in warm water in accordance with the instructions, then pour the solution into the device’s reservoir. Then, in the steam mode, release all the water; thanks to the iron descaling agent, the dirt will come out through the holes on the sole along with steam and liquid.

Adviсe

A few tips from experienced housewives will help solve the scale problem as quickly as possible:

If you use softened water (ordinary tap water, boiled for ten minutes with a small amount of baking soda), you will have to clean the iron less often.
The cleanliness of the anti-lime rod must be checked at least once every month and a half.
You can avoid the rapid appearance of scale deposits by pouring distilled water into the iron (sold at any gas station).
After cleaning with acetone, the device is tested on unwanted clothing. This will help prevent yellow marks from appearing during the ironing process.

The more often cleaning is carried out, the longer the life of the household appliance will be.

Find out more about ways to remove scale from household appliances here.

How to descale an iron using the self-cleaning function

Manufacturers are well aware that scale gradually forms in steam devices, which often causes the device to break down. Therefore, some modern irons are equipped with an anti-scale function in irons; if it is available, it is not necessary to resort to cleaning agents.

You can clean the device using the corresponding function as follows:

Distilled water is poured into the inner container level with the maximum mark on the tank scale.
The iron is plugged in and set to maximum heat until the device turns off automatically.
After this, the steam supply regulator is set to zero, and the device is placed over a basin or bathtub and the self-cleaning button is pressed.

Most of the liquid will pour into the substituted container; to remove the water better, you will need to shake the iron several times, then the scale particles will definitely not remain inside.

Then turn off the device, place it vertically and wait for it to cool completely, after which the tank is rinsed with clean water and the sole is wiped with a soft, dry cloth. After using the self-cleaning descaler in the iron, it is recommended not to turn on the device for 24 hours.

Further care to prevent lime deposits

Regular care and compliance with the operating rules of the iron will help prevent the appearance of scale:

It is advisable to pour filtered water into the iron, because the fewer salts contained in the liquid, the longer the device will remain clean;
Read also: How to clean an electric stove: how to clean it properly at home
at the end of ironing, the water must be drained (this will help avoid the appearance of an unpleasant musty odor and prevent the appearance of scale);
the device must be kept in an upright position at all times, with its nose up (even when turned off);
It is necessary to carefully ensure that the sole of the iron remains perfectly flat (it is almost impossible to remove scale from dents or chips).

It is best to monitor the condition of a household appliance from the moment of purchase. Early prevention of scale will preserve the original appearance of the iron for a long time.

Self-cleaning function

Currently, you can find various brands and models of irons on store shelves: the most expensive ones with all sorts of functions, and the cheapest ones with a minimum of features. Before you start using the appliance, you should read the included instruction manual. Some modern iron models have a self-cleaning function. Perhaps your iron also has this capability. This function is said to clean the steam vent area well.

Of course, if a fragment of fabric is stuck to the sole of the iron or there are old burnt deposits, then the self-cleaning function will no longer help. But if you carry out the procedure after each ironing, then there will be no problems with cleaning the working surface of the electrical appliance in the future.

Preventive measures

To ensure that the need for “general” cleaning of the iron occurs as rarely as possible, you should follow simple measures to prevent the appearance of soot and scale:

Set the correct temperature depending on the type of material. When ironing delicate materials and wool, cover items with gauze or cotton cloth.
Use purified or distilled water depending on the manufacturer's recommendations.
Activate the self-cleaning function two to three times a month.
After each use, wipe the iron with a damp towel.

Cleanliness of the iron is not only an aesthetic requirement. An appliance whose holes are blocked by scale and whose soleplate is contaminated with carbon deposits works less efficiently and damages things. You can clean it using industrial and home remedies.

It is important to act carefully and take into account the features of the working surface. Cleaning should be carried out regularly, in this case it is easier to get rid of dirt.

Share Like Share Tweet Pin