How to remove grease stains from different types of doors: useful tips, reviews

How to remove greasy and dirty stains from interior doors - proven means and methods

General, periodic or unscheduled cleaning is part of our everyday life, and there is no escape from it. Most of the measures provided for in such cases are carried out using long-established, traditional technologies. However, not everyone knows how to effectively remove grease stains from laminated doors. In fact, if you look at it in detail, all the techniques implemented at home are quite simple.

When starting to remove stains, you need to take into account that doors made of PVC, chipboard or plywood are more “gentle” in terms of care. As a rule, they are the ones that are laminated, and this protective and decorative layer is easily damaged by abrasives, especially if it is a paper-based film. Therefore, when washing such interior doors, extreme attention and accuracy is required.

Sponge or soft napkins. One will not be enough to remove grease stains.
Warm water.
Cleaning products - soda, alcohol, essence (lemon or vinegar), household solvents, laundry soap. They are used depending on the origin of the stains, including fatty ones. After all, the latter may not be the only ones on the canvas, box, or trim. Therefore, when deciding what to wash wooden doors with (plastic or otherwise), this must be taken into account; It’s unlikely that anyone will be happy with the prospect of putting them in order in several “passes.”

Operating procedure

Determination of the nature and extent of pollution

The door may not necessarily be stained with drops of grease. Traces and dirty spots appear on it even after repeated touching with seemingly clean hands. But the secretions of the sweat glands still remain. As a rule, in the place where the handle is located. Gradually, dust adheres to this area, and the lamination begins to darken. Such a preliminary examination will allow you to determine exactly what and how to remove grease stains from doors covered with laminate.

Preparation of the solution

Depending on the degree of contamination, one of the following options is selected:

soapy;
vinegar (10%);
lemon essence (same concentration).

Surface preparation

To simplify the process of removing fat, the base must be freed from adhering dust and dirt. The housewife decides how to wash the door herself, focusing on the material of the door and the type of lamination. As a rule, the same soap solution is sufficient. But here you need to know a sense of proportion. It’s one thing if the canvas is made of plastic - in relation to the liquid (if it is not aggressive), this material is inert. But if you have to wash a wooden door, you should be careful; the canvas is immediately “dried”, that is, wiped dry with a soft cloth.

Fat removal

To do this, you will need a weakly concentrated solution (1 to 10) of citric acid or vinegar. Alternatively, alcohol. The product is carefully applied with a moistened cloth to the stain. Recommended exposure is about 2.5 - 3 minutes (with an average degree of contamination).
Rinse off the solution along with fat fragments with clean warm water.
Wiping the door with a dry cloth.

It is not recommended to keep the solution for more than 5 minutes. Any of the drugs used is to some extent aggressive, and can damage it with prolonged contact with the protective layer. The same fully applies to the question of how to care for doors with lamination. In this regard, they are much “gentler” than their metal or glass counterparts.
When caring for wooden doors and removing various stains from them, it is advisable to dry the treated area with a hairdryer. This is safer and faster than wiping the surface with a cloth.

If you choose the right method for removing grease stains, then there will be no traces left on the laminated door. It is advisable to clarify this issue before purchasing it. Furniture showroom managers are well versed in this and will definitely give some sensible advice.

Removing grease from glass doors

Our apartments often use glass doors. And on their smooth surface, greasy stains remain especially often and stand out quite strongly. If it is ordinary glass, then there should not be a problem. Just wipe with a damp or alcohol-soaked soft (so as not to leave scratches) cloth and everything will go away. However, sandblasted frosted glass is a completely different matter and is much more difficult to remove grease from. In this case, several methods are usually used:

Soap and ammonia based products;
Baking soda, which we will use to scrub away grease stains using a soft sponge;
Alcohol or glass cleaner containing alcohol;
Ammonia mixed with water in a ratio of 1 to 10.

We also recommend

Is collecting money for treatment a scam or a necessity?
Classifications and criteria used in the implementation of medical and social examination of citizens - Rossiyskaya Gazeta
The meaning of emoticons, written symbols, their decoding, designation and types of emoticons
How to find out what a particular Emoji means
All about apitherapy: what kind of technique is it, who is it suitable for, who is it performed by and does it have contraindications for use?
Apitherapy - treatment with bee stings

What you need to know before cleaning

When starting to clean interior doors, you need to consider some points:

Do not start cleaning door coverings without testing the selected cleaning product. To do this, you need to use an inconspicuous area. If there are no negative consequences, then you can begin to thoroughly wash the surface.
Do not use any kind of hard brushes, steel wool or scrapers. They will certainly lead to the integrity of the coating being compromised. Once the stain is removed, it will be necessary to repaint or replace the entire door.
Do not use the following strong reagents when cleaning: 96% alcohol, pure, undiluted acetone, acids and solvents.
Do not leave the cleaning agent, or water, on the surface to be cleaned for a long time to avoid unpleasant consequences such as swelling or lightening of the area.

Methods for cleaning doors made of various materials

Before you begin removing grease stains from the surface of interior doors, you need to clarify what material they are made of. Cleaning methods depend on this.

Chipboard and MDF (verified by the editors)

Method 1: citric acid or vinegar cleans chipboard and MDF surfaces well. Prepare a solution of 2 tbsp. l. lemon (or table vinegar) in a glass of water and use a soft sponge or cotton pad to clean problem areas.

Method 2: make a soda solution (take 3 tablespoons of product per 200 ml of water). The dirt is washed off with a soft sponge soaked in it, and then wiped dry with a clean rag.

Method 3: prepare a solution of water and dishwashing gel and foam thoroughly. This foam is applied to greasy blots and left for 5 minutes. After this, the remaining dirt is washed off with water and wiped with a dry cloth. This method is suitable even for white products.

After cleaning using any of the above methods, be sure to polish the surface using soft flannel.

Verified by the editors: MDF doors have greasy, old stains. Previously, alcohol-based glass and surface cleaners were used for cleaning. The result of cleansing is 10 out of 100.

A solution with citric acid was tested on one of the doors . The photo shows 100% removal of stains from the door. But it wasn't easy. The procedure had to be repeated several times with pressure. Cleaning an entire door in this way is very difficult, time-consuming and troublesome.

result after cleaning stains with citric acid solution

The next test is cleaning with soda solution . Stains from doors are washed quickly, without any effort. After cleaning, you need to wash off the whitish stains. The only drawback is that the drops fall on the floor, which will need to be washed immediately. And this may not be part of the plans of those who are used to doing general cleaning partially. Which is even correct, so it’s worth laying something down.

Popular door cleaning methods

Surface cleaning depends on the quality of the material. For MDF and chipboard, which are common in our regions, the following methods are suitable:

Method 1

Vinegar or citric acid is suitable for cleaning such surfaces. It is necessary to prepare the following solution. For a glass of water, add 2 tablespoons of lemon or the same amount of vinegar. Wet a sponge or cotton pad with the resulting solution and wipe the problem area with it.

Method 2

It is necessary to prepare a soda solution, observing the proportions of 200 ml of water and 3 tablespoons of soda. Moisten the resulting liquid with a sponge and wipe off the dirt. After this, wipe the problem area with a dry cloth.

Method 3

Prepare a solution from dishwashing gel and water. Then lather it and apply it to the greasy stain for 5 minutes. Dirt is easily removed and wiped dry. This method is ideal for white products. Regardless of which cleaning method is chosen, it is necessary to wipe the door thoroughly after washing. For this, use soft flannel. It makes it easy to polish the surface.

For MDF doors, you can choose an alcohol-based glass cleaner. They perfectly remove greasy stains. You can also use folk remedies, but you will have to make an effort to clean it.

How to remove grease stains from a laminated door

Laminated interior doors removing oil stains how to remove greasy stains from doors

In order to increase its service life, any product must be properly cared for. And interior doors require special care. Care products for interior doors depend on the material from which they are made. Laminated doors are based on a plywood board or chipboard, with a pattern on top, usually on a paper base, and laminated with a special film. The main rule in care is the preservation of the top, laminated layer. But even on such doors stains of various origins can form, which spoil the appearance and which are best removed.

To remove stains from a laminated door you will need (and it is best to always have on hand):

Several soft napkins or a small sponge
Solutions of household solvents (ammonia, acetone)
Alcohol
Vinegar or lemon essence
Laundry soap
Soda

Stains on a laminated surface can be removed in the following ways:

First of all, it is necessary to determine the origin of the stain.
Before you begin removal, remove dust from the surface of the door leaf (you can use a damp cloth).
Using a cloth moistened with a mild detergent, you can remove stains from juice, wine, and chocolate. The napkin is applied on top of the stain for three to five minutes, and then wiped with a soft, dry cloth.
Household solvents can be used to remove stains from nail polish, cigarettes, lipstick, markers, felt-tip pens or pencils. A sponge moistened with any solvent (acetone, white spirit, etc.) is kept on the stain for a short time, and then wiped with a soft, dry cloth.
If coffee stains appear on the surface of a laminated door, they can be removed with alcohol or ammonia solution. If the coffee stain was not removed immediately, and it has already dried out, then you can prepare a special solution (three teaspoons of baking soda per two hundred grams of water). Gently wipe the stain with a sponge or cloth soaked in the solution, dry with a hairdryer, and wipe with a soft, dry cloth.
Stains left by wax or chewing gum are most easily removed. The area of contamination is thoroughly dried and cleaned with a small scraper. The operation to remove such stains must be carried out with extreme caution so as not to damage the surface.
If acid stains appear on the surface of a laminated door, they can be removed with a cloth soaked in a solution of vinegar or lemon essence. Similarly, a napkin is applied to the stain, and after three to five minutes it is thoroughly wiped with a soft, dry napkin.
Complex stains caused by paint or shoe polish can be removed with special products designed for this purpose. Such products can be purchased at any hardware store.

A product for removing stains from laminated interior doors

When removing stains of any origin from a laminated door, you should remember that a damp cloth cannot be kept on the surface of the door for more than five minutes, and then you must immediately wipe it with a soft cloth and after one to two minutes wipe it with a damp sponge (moistened in plain water). This will avoid possible deformation of the top laminated surface. But if you still can’t remove the stain, you shouldn’t immediately think about replacing the entire door. Currently, there are special pencils for masking stains on laminated surfaces. You can purchase such a pencil at a hardware store and choose the color and tone to match the color of the door. You can also cover the stain with a special color-matched film. It is not recommended to clean stains on a laminated door with abrasive cleaners, as this may damage the surface.

How much does it cost to call a measurer and change the glass in an interior door reviews

Instructions on how to care for laminated doors, tips on how to remove stains from laminated doors, how to clean greasy stains on a door

Removing greasy stains from laminated doors

The laminated door is based on chipboard, or even plastic, which is covered with a paper layer with a pattern, on top of which a film is placed. The latter does not have the same strength as metal, so the ideal solution in this case would be treatment with alcohol, vinegar or citric acid. All you need to do is wipe the stained surface with a cloth soaked in the liquid described above, then wait a couple of minutes and wipe everything off with a wet cloth. It is better not to delay this, since leaving such components on the laminated surface for more than five minutes, you risk causing damage to the coating.

How to easily remove grease stains from doors made of chipboard, MDF and veneer

MDF panels, from which modern interior and entrance doors are usually made, often become dirty with the appearance of greasy stains. To maintain the ethics and beauty of such doors, many housewives have to use various improvised means to remove such stains. Moreover, depending on the type of surface coating, use appropriate cleaning agents. In this review, we will take a closer look at how to remove greasy stains from MDF doors, maintaining a natural appearance and without spoiling the surface layer.

Why do greasy stains appear on door coverings?

Mostly, grease stains are localized in the area where the door handle is located, since this is where we most often touch with our hands. As you know from biology courses, the skin of our hands tends to secrete sweat-fat segments. When it comes into contact with the surface of the door, those same transparent sweat marks remain on it, onto which over time many dust particles settle and turn into real dirty spots. This problem is especially common among young housewives with small children and pets.

But it is also worth noting that greasy stains on the surface of interior doors appear as a result of contact with a variety of biological or chemical liquid substances that have a certain percentage of fat content.

Safe methods for cleaning MDF doors from greasy stains

Every woman strives to maintain 100% perfect cleanliness and external beauty of all surfaces in the house, therefore, in order to most effectively remove traces of grease from a wooden surface, it is recommended to first accurately determine the type of coating. Then start selecting the most effective cleaning product.

Advice: before you start cleaning the door from various contaminants, it is recommended to conduct a trial test for the interaction of the door with the selected cleaning agent in an inconspicuous area. If no reaction occurs during a test application of the cleaning product, use the selected ingredient to clean the main area of contamination.

Also remember that it is not recommended to remove stubborn stains using the following substances:

pure alcohol;
undiluted acetone;
all types of solvents;
using acids.

Moreover, the use of special metal and hard sponges to remove dirt is also strictly prohibited, since the use of the listed equipment will lead not only to the removal of greasy stains, but also the protective surface layer, leaving a layer of solid wood unprotected. As a result of such cleaning, you will either have to completely repaint the entire door or replace it altogether.

Let's take a closer look at how to remove a greasy stain from MDF with a laminated, veneered and painted surface layer.

Cleaning laminated doors

First of all, let's look at how to clean laminated MDF panels. First of all, it is worth noting that such doors have a special protective coating in the form of a thin film, which makes them much easier to care for:

To effectively remove greasy marks from laminate flooring, you should first prepare an alcohol solution by mixing pure alcohol with water in a ratio of 1:9, where 9 parts are water and 1 part is alcohol. Next, you need to moisten a small piece of cloth or napkin in the prepared mixture and, applying it to the area of contamination, try to fix it for 5-6 minutes, after which wipe the treated area with a clean, dry towel.

It is important to remember that laminated surfaces should not be cleaned using abrasives, various alkalis and acids.

You can wash grease stains from a laminated surface using 72% laundry soap. But first, prepare a strong soap solution from it. To clean the door, you should first quickly wipe all affected areas with soapy water using a foam sponge or melamine cloth, then wash off all soap stains from the treated areas with clean water and wipe the entire surface of the door dry with a paper towel. Carry out procedures using a soap solution and clean water very quickly so that the door does not have time to absorb a large amount of liquid and swell.
You can remove greasy stains from laminate flooring using a special pencil, which can be purchased at any household chemicals store.
And also on the shelves of modern supermarkets and household stores there is a huge selection of paste-like chemicals designed specifically for removing greasy marks and other types of stubborn stains.

Cleaning the veneer surface of MDF doors

If you have installed new MDF doors with a veneered surface in your apartment, then to prevent the appearance of various abrasions, hand-grease marks and other stains on it, it is recommended to cover them with polish immediately after installation.

But if such a nuisance happens, and greasy marks still appear, then we will consider in more detail how to remove these contaminants in order to preserve the original appearance of the veneer coating.

Our ancestors also used one unique way to remove various contaminants from any surface - using a potato cut in half. To accomplish this you will need the following additional ingredients:

the potato itself, cut in half;
a small amount of baby powder (or body talcum powder);
clean cloth or napkins.

Before removing a greasy mark from a veneered surface, you should:

Depending on the amount of dirt on the surface of the door, take one or two halves of cut potatoes and apply them to the marks themselves, using a little effort, thoroughly rub the entire area of the dirt until potato juice appears.
The whole thing should be left in this form for 10–12 minutes, until all the juice is completely dry.
After thorough drying, white starch should remain on the surface of the door, which should be removed with a clean, dry cloth or napkins.
If, after removing the starch, white marks remain on the veneer, then taking a clean towel or napkin, apply a small amount of baby powder to it and carefully wipe off the remaining stains.

Advice: after the cleaning procedure, the veneer should be carefully polished with a thin layer.

Cleaning painted MDF surfaces

Almost all painted wooden surfaces have another unique property - a varnish coating, which creates additional protection for the paint and gives a beautiful shine. Therefore, when caring for such a door, it is not recommended to use abrasive cleaning agents, which can damage the protective layer, lead to dulling of the treated area and the disappearance of the previous shine. Let's take a closer look at how to wash painted doors in order to preserve all the beauty of their appearance:

The first thing that is recommended to use is a baking soda solution, which should be prepared from equal proportions of baking soda and mouthwash. Moisten a clean cloth in the prepared mixture and treat all dirty areas, then wipe everything dry with a clean towel.
You can also clean a painted door using a strong soap solution prepared on the basis of 72% liquid soap, after which the entire treated surface of the door should be thoroughly rinsed with clean water and wiped dry with a towel.

Cleaning a painted MDF door from grease stains

Most MDF structures are coated with a special protective varnish, so the use of abrasives is strictly prohibited.

To remove grease, make a one-to-one solution of baking soda and mouthwash. Wipe the problem area with a cloth soaked in the solution. Finally, thoroughly dry the canvas with a dry cloth.

Grease stains on a painted MDF door

You can use the previously described method using a soap solution. It is important at the end to thoroughly wash the surface of the interior structure with clean water and wipe it dry.

In order not to spoil the product, maintain its neat appearance and maintain cleanliness in the house, it is important to learn how to properly remove various stains. Therefore, before eliminating the problem that has arisen in the form of grease, decide on the type of surface and coating of your door and only then start cleaning it.

Interior and entrance doors are often dirty with greasy stains. Moreover, depending on the surface, there are very, very many ways to remove such stains. In this article we will try to consider the most popular of them, depending on the type of material of the door leaf or platband.

Since we usually touch doors with our hands, fat is often transferred from the surface of the skin to the surface of the door. And for this, the hands themselves do not have to be oily, since our skin secretes oil on its own. At first glance, such marks may not even be visible, but over time, grease creates real dirty spots, as dust actively settles on it. Also, greasy stains can be caused by doors coming into contact with various liquids, both biological and chemicals.

How to clean grease stains from MDF and chipboard panels?

There are four ways to remove grease stains from the surfaces of chipboard, MDF and laminated chipboard:

Using a solvent: moisten a foam sponge in this product, carefully rub this substance into the grease stains for 4-5 minutes. After which the treated area should be thoroughly wiped with a dry towel.
Using a natural remedy in the form of citric acid, which should be diluted in the amount of two tablespoons in 200 ml of water and, using a cotton pad, wash the affected areas of the door surface for 3-4 minutes.
Using baking soda: dilute 3 tablespoons of this product in a glass of water and remove all dirt with a cloth soaked in the resulting mixture, then wipe dry all treated areas.
To use detergent: dilute 3 tablespoons of dishwashing detergent in half a glass of water and lather thoroughly. Then apply the resulting foam to the greasy stains and leave it all for 4-5 minutes. Then rinse the panel with a cloth with clean water and wipe with a dry towel.

To learn how to clean doors made from PVC panels, watch the following video:

Dear visitor! If you know other methods on how to remove stains, please leave your experience in the comments.

How to remove grease stains from MDF doors

Every home needs to be kept clean and tidy, but sometimes even experienced housewives need help. One of these situations is when greasy stains appear on the doors. In most cases, greasy stains appear around the handles. This happens especially often when the house is filled with children and pets. We will look at how to remove greasy stains from MDF interior doors without resorting to replacing them or the help of specialists in this article.

Initially, you need to determine what kind of coverage:

laminated
veneered
or painted

Advice! Before you start cleaning, it is recommended to test in an inconspicuous area; it is best to test on the lower end of the door leaf.

Important! When removing difficult stains, the use of aggressive substances is prohibited: undiluted alcohol, acetone, solvent, various acids. Among other things, the use of hard and metal sponges is also prohibited. During cleaning, these components not only remove grease contamination, but also remove the protective coating down to the whole wood, which leads to either a complete repainting of the entire door leaf or its replacement.

Safe methods for cleaning MDF doors from greasy stains

Every housewife dreams of 100% cleanliness and preservation of appearance when removing greasy stains from interior doors. After determining the type of coating, you can begin the cleaning process.

Cleaning laminated doors

MDF doors with laminated coating have a special property - the presence of a protective film coating, which, in turn, makes them easier to care for.

To remove greasy stains, you can use an alcohol solution (diluted alcohol with water, in a ratio of 1 to 9). Soak a cloth in an alcohol solution and fix it on the stained area for five minutes, then wipe the treated area with a dry cloth.

Advice! When caring for laminated flooring, it is not recommended to use abrasives, as well as various acids and alkalis.

You can also remove greasy marks from laminate flooring using a solution of liquid laundry soap. After wiping the door with soapy water, you need to wash the surface of the door with clean water. All manipulations using liquids must be carried out very quickly to prevent excessive moisture absorption into the inner layers of the door covering.
Among other things, on the shelves of modern stores there is a huge selection of various pastes designed specifically for caring for laminated surfaces. You can also remove greasy marks with a special pencil for laminate flooring.

Cleaning the veneer surface of MDF doors

When installing new doors with a veneered surface, it is recommended to immediately coat them with a layer of polish - this will help protect the coating from the formation of greasy fingerprints, various contaminants, and also from abrasions.

How to remove greasy stains from a veneer surface without using various detergents and chemicals?

There is a very old proven method for removing fat from various surfaces using potatoes. For this you will need:

one raw potato
talc or baby powder
clean napkins

The potato needs to be cut into two halves.
Apply half a potato to the problem area using the cut point, and thoroughly rub the spots until potato juice forms on them.
Leave for 10-15 minutes until the juice from the potatoes dries.
Remove any remaining starch using a dry cloth.
If white stains remain, then you need to apply a small amount of powder or talcum powder to a clean napkin or soft cloth and wipe off the remaining stains.

Attention!

After cleaning, it is recommended to apply a layer of polish.

Cleaning painted MDF surfaces

Basically, all painted interior doors are covered with a protective varnish layer. Therefore, when caring for them, it is necessary to remember that the use of various abrasive detergents can lead to damage to the protective coating and the disappearance of the previous shine. The safest ways to clean a varnished surface:

Baking soda diluted in mouthwash, preferably in equal proportions. Wash the problem area with a cloth soaked in the prepared solution, then wipe with a dry cloth.
You can also use a soap solution prepared using laundry soap. After wiping the greasy stain with soapy water, the door must be rinsed with clean water.

When cleaning interior doors from grease stains, you must remember that the correctly chosen method and foresight will help get rid of the problem without additional surprises that may appear in the form of white spots on a colored surface.

Dear visitor! If you know other methods on how to remove stains, please leave your experience in the comments.

pyatenet.ru

Operating procedure

Even touching the door with seemingly clean hands can leave dirt behind over time. Therefore, interior doors, especially to the kitchen, should be washed at least once a month.

Greasy marks must be removed immediately, as dust sticks to the grease, the stain becomes larger, and the doors begin to deteriorate.

Surface preparation

First you need to get rid of stains of dirt and dust. This will greatly facilitate the process of removing oily marks. As a rule, in this case it is enough to simply wash the canvas with warm soapy water and a cloth. But when washing the canvas, the water should be removed immediately so that the door does not deteriorate. After washing, the doors are dried with a rag and wiped dry.

When the surface is ready to remove greasy marks, choose a cleanser and get to work.

Useful tips

The cleaning solution should not be left on for more than 5 minutes. Any of the products used can damage the MDF if exposed for long periods of time - leaving light spots or other unattractive marks on it.

After washing MDF doors, many housewives dry them with a hairdryer. This is much safer than wiping the canvas dry with a cloth.

When caring for MDF doors, do not use abrasive cleaners or products containing chlorine. Even washing powder can ruin the fabric. You should also not use metal scrapers or abrasive sponges, which will inevitably leave scratches on the surface.

What can harm?

These products may damage the surface:

Household chemicals containing acids and ammonia.
Gasoline products. If there is glass on the door, then rainbow stains will remain on it. Gasoline can damage a laminated surface, leaving a scorched spot on it.
Alkaline compounds.
Abrasive cleaning products.

When cleaning doors, you should first wipe it with a clean damp cloth and then with a dry one. Powders, hard brushes and scrapers can damage the surface. Metal elements and fittings can be wiped with soapy water and then dried with a soft cloth. When cleaning and removing stains on doors, do not use fluffy fabrics - it is better to give preference to soft, lint-free wipes.

Improvised products and household chemicals

There is no need to run to the store and buy expensive detergents. Sometimes unexpected products can help remove oily stains from your doors. For example, potatoes.

Raw potatoes should be cut in half and rub the dirt on the cut side. The juice should dry completely. After this, wipe the canvas with a dry cloth - all stains will go away. This method is ideal if the greasy marks are already very old. If after cleaning there are unsightly stains left, they can be removed by sprinkling with talcum powder. A little powder is applied to a napkin and wiped the treated area.

The dishwasher contains active ingredients specifically for washing away grease. It will also help to wash the MDF canvas. A spoonful of gel is dissolved in a liter of warm water and the stained area is wiped with a rag. After removing the grease, you should wipe the doors with polish so that there are no streaks left.

If the doors are not painted, then you should try cleaning them from grease with a homemade paste. To do this, white cosmetic clay is mixed in half with vinegar, and the gruel is rubbed onto the stain. When the paste dries, it is washed off with warm water. For these purposes, it is best to use white cosmetic clay, which is sold in every pharmacy and costs a penny.

Laminated doors are a little more difficult to clean. Stronger substances will help here. Can be used:

Pure table vinegar
Ammonia in its purest form
Acetone or acetone nail polish remover

A cotton swab is soaked in the selected liquid, and then the dirt is carefully wiped off. If there is a pattern on the doors, then first the chosen product must be tested from the bottom of the canvas so as not to spoil the decor. Solvents can also be used for these purposes, but they must be tested before starting work.

A great way to quickly remove grease stains from doors is with simple baking soda. Using the product is very simple: dilute 3 tbsp in 200 ml of warm water. l. soda A clean kitchen sponge is soaked in the working solution and the stained area is wiped well with it. Remains of soda are removed with a wet cloth.

A sure-fire way to quickly remove traces of grease from MDF is citric acid. To do this, you need to dilute 2 tbsp. l. acid in 200 ml of water, soak a cotton pad in the solution and carefully wipe off the greasy stain.

It happens that it is necessary to wash wooden doors covered with veneer. Veneer is a thin section of wood covered with MDF. The price of such a door is low, but it looks just great. To clean veneer sheets, do not use aggressive chemicals. In this case, a soft polish with wax is used.

You can also remove greasy stains without a trace from MDF canvas using medical alcohol or even vodka. A napkin is moistened in the substance and the dirt is wiped with it. After cleansing, the treated area should be rinsed with clean water and dried.

If you only have window cleaner on hand, you can use it to clean the MDF. A little product is sprayed directly onto the stain, and then the grease is immediately wiped off with a cloth. If you cannot remove the greasy stains the first time, then the procedure must be repeated again. Finally, the doors are wiped with polish.

Ordinary vegetable oil also works great to remove grease stains and clean doors. Soak a cotton pad in the oil and then vigorously rub the stain with it. You need to rub until foam appears. Then the treated area is wiped with a dry cloth. The next step is cleaning with vinegar solution. To prepare it, you need to dilute table vinegar with water 1:1. Those places on the doors that have been cleaned are additionally wiped with a vinegar solution. All that remains is to wipe the canvas with a dry cloth, and the door will be as good as new.

Sometimes a simple school eraser can help with grease stains on doors. It is used as usual - the stain is wiped off. But first, it is recommended to carry out the procedure on an inconspicuous area of the door to see if the eraser will damage the door.

It doesn’t matter if yellow stains appear on your down winter jacket after an unsuccessful wash. It happens that you have to wash vomit stains from upholstered furniture or clothes, and it is very difficult to clean a mattress from red stains and the smell of urine, but there are methods. You can, Removing stains is always a long and labor-intensive process, especially if it concerns traces of food or

How to remove grease stains on doors: unpainted surface

Stains from an unpainted wooden door are removed using a mixture of clay and vinegar, which is mixed until smooth and applied to the dirt. After the mixture has completely dried, it is washed off with warm water.

To remove dirt from a polished door, it must be treated with talcum powder. If this is not available, raw potatoes cut in half will do. The door treated with talcum powder or potatoes is left for 15-20 minutes, after which it is wiped with a damp cloth.

If after such treatment stains form on the surface, you can polish the door using flour and a soft rag, pre-moistened in a small amount of sunflower oil.

If a large number of greasy stains and abrasions appear on an interior door coated with varnish, then in order to return it to its original appearance, the door must be re-opened with varnish. It's not difficult to do.

The first step is to remove the door from its hinges and place it on a pre-prepared flat surface. After the door is already in place, you need to remove all the handles, hinges and bolts.

Having completed the previous steps, you can safely proceed to removing the old varnish coating. You can do this in several ways:

Special product for removing varnish from wood (removal);
Mechanical method;
Heat treatment.

The simplest method will be the first one using a special wash. It is recommended to carry out the work in 4 stages:

Apply the remover to the surface with a brush. This must be done carefully, brushing in one direction.
Creating a compress. To enhance the washing effect, the surface must be wrapped in film. And it will be left in this state until the wash acquires a brown or dark brown color, usually this process takes from 40 minutes to 4 hours.
Removing varnish. Depending on the thickness of the varnish layer, this must be done either with a spatula or sandpaper.
Neutralization of the remover. After the work of removing the varnish is completed, its remnants should be washed off with water and vinegar.

When the door is cleaned of old varnish, and therefore of all grease, it needs to be sanded with sandpaper. And use a brush to remove all dust and debris.

This completes the preparation of the door for varnishing. You can use a wide brush to apply varnish to the door. This should be done evenly and in one direction. And depending on the required tone, layers can be applied from 1 to 3.

Greetings, readers of my blog.

Stains from water and grease, the appearance of abrasions on the surface - all these are the reasons for the loss of the presentable appearance of interior doors. Mostly, stains appear around door handles, as well as at the bottom of the door leaf at the point of contact with the feet. The problem of dirty doors becomes especially urgent with the appearance of children or pets.

If the surface of the door leaf is partially dirty, remove the stains from the door

won't be difficult. If the defects affect the entire surface, then you will have to resort to more radical methods.

Every normal housewife strives to maintain order and cleanliness in the house. But some surfaces are very sensitive to cleaning and in order not to make mistakes you should follow my recommendations:

For the manufacture of interior doors, wood is used directly or indirectly, which is resistant to high humidity. Even for simple cleaning, you should not use a very damp cloth, as this can lead to swelling of the fabric.
To remove grease stains from the door, you should not use aggressive agents such as acetone, solvent, or alcohol.
To remove stains, use a soft sponge for washing dishes, not wire brushes. The damaged surface of MDF or laminated doors cannot be restored - you will have to change the canvas.

Why do greasy stains appear on door coverings?

Basically, the surface becomes oily at the level of the waist and chest. This is due to the fact that people touch this area more often. And since the skin secretes fats along with sweat, upon contact with the surface of the door leaf they end up on the surface of the coating. If you don't wipe the door for a long time, dust and pet hair will settle. Also, stains are formed due to the contact of fatty substances on the surface.