Tips for properly cleaning your iPhone headphones

What you need to clean your headphones

Pollution is visible to the naked eye. In addition, sound quality and volume deteriorate. The easiest and most cost-effective way to solve the problem is to clean your iPhone earwax from earwax yourself.

Airpods have a laconic, convenient shape and produce clear sound. Speakers with metal meshes that protect internal parts from yellow-brown secretion. The headset needs to be cleaned from time to time.

The mesh becomes clogged with a layer of sulfur, the white wire takes on a gray-dirty tint. For cleaning procedures you will need:

• hydrogen peroxide (H2O2);
• cotton pads or napkins;
• toothpicks;
• cotton buds.

Progress of the procedure

The peroxide solution does an excellent job of removing sulfur and other dirt stuck to the airphones, the speaker meshes and the wire itself, quickly dissolving it. We act in stages:

1. Disconnect the headphones from the iPhone.
2. After moistening a cotton pad in H2O2, squeezing out the excess liquid, we wipe the meshes on the speakers.
3. After 1-2 minutes, moisten the cotton swab with peroxide and treat the mesh again.
4. Use toothpicks as needed (carefully!).
5. Having completed the procedure, wipe the headset with discs.
6. Leave to dry. Some people prefer to use a hairdryer. To do this, select a gentle mode for the minimum time of blowing with warm air.

This method guarantees the removal of contaminants and ensures a look like new “airpods”.

Hydrogen peroxide works best for removing earwax. If unavailable, replace it with alcohol (ethyl, boric) or vodka.

How to properly clean your case

The manufacturer recommends cleaning the charging case using a microfiber cloth that can be moistened with isopropyl alcohol . Once cleaning is complete, it is important to ensure that no liquid gets into the charging ports.

There are other proven ways to clean your AirPods case.

Case dirty

Cleaning the case with vinegar solution

You need to mix vinegar with water in a 1:1 ratio, and moisten cotton swabs with the resulting solution and wipe the stained areas. It is very important to wring out or blot the stick first; under no circumstances should liquid penetrate inside the charging case. Instead of a stick, you can soak a soft toothbrush in the vinegar solution and brush with it, also remembering to wring it out first.

Cleaning the case with PVC tape

This method is good for getting rid of accumulated dust, dirt and lint. You need to cut the electrical tape into pieces and paste over the dirty areas. Where there are indentations and grooves (for example, along the contour of the connection between the lid and the case), you need to press the tape as tightly as possible using a toothpick. Now the tape can be peeled off, and most of the dirt will come off with it.

Cleaning the case with PVC tape

Cleaning the wire

Not only the speakers, but also the wires need periodic cleaning. With daily use, they quickly become dirty, turn yellow, dust collects on the cords, and stains appear.

Cleaning the wires is similar to cleaning the speakers. That is, using the same hydrogen peroxide. For perfect condition and appearance, it is enough to constantly wipe the wires with this solution.

It is recommended to perform this procedure once a month. It’s good for the headset and for the ears, from a hygiene point of view.

You can also bleach the cord with nail polish remover or alcohol.

How to clean the wire from headphones?

• The easiest and most affordable way is using wet wipes.
• You can wipe it with a cotton swab, dipping it in alcohol and nail polish remover. But use them with caution. These liquids can dissolve thin insulating material. We use nail polish remover exclusively for rubberized wires, since acetone additives can damage the painted plastic surface.
• It is problematic to wipe off strongly ingrained blackness. In this case, a silicone sponge helps a lot.

How to clean iPhone headphones

Every self-respecting smartphone manufacturer equips the box with its gadget with branded headphones. Often these devices are not of excellent quality, and users, especially demanding audiophiles, have to separately purchase a more suitable model. But the most popular brand in the world went a different route. These headphones are so high quality that rarely anyone has the desire to exchange them for something else.

After all, if the sound quality has noticeably deteriorated, but you want to correct the situation with minimal loss of finances, because new original EarPods are not cheap. Until the appearance of EarPods last year, iPhones and iPads were equipped with the more familiar Apple Earphones with a large round mesh on the speaker. Naturally, it is more profitable for her for the user to purchase a new product to replace the broken one, rather than repair it. That's why Apple Earphones are tightly soldered.

Of course, it is not recommended to disassemble them, but if the iPhone headphones need to be cleaned, at a minimum, then you can carefully open them at your own peril and risk. Craftsmen have posted similar experiments on the Internet.

They took out the mesh, cleaned it and inserted it into place, carefully gluing the seams with super glue. Still, we do not recommend carrying out such risky procedures. To clean the headphones of the first generations of Apple products from sulfur and dirt, all you need is a napkin or cotton swab thoroughly moistened with hydrogen peroxide and a dry cotton swab.

Earphones should be laid with the mesh side down on a peroxide-soaked surface. Let him lie in this position for 10-15 minutes, preferably more. After this, you can walk over the surface with a cotton swab, not pressing in the remaining dirt, but carefully collecting it. The entire plastic surface of the earphone must also be wiped with a cotton swab or napkin soaked in peroxide but wrung out.

After this, the headset will be as good as new. Every year there are fewer and fewer Earphone users, because progress does not stand still. Not much time has passed since the release of the iPhone 7, and the network has not yet been filled with questions about how to clean the AirPods wireless headphones from the new iPhone.

They probably haven't gotten dirty yet. So at the moment the most popular headset is EarPods. Wireless headphones for the latest iPhone models can be cleaned using the same principle as EarPods. As in the previous version, these headphones have a non-separable drop design. How are they different? EarPods do not have one large common speaker, as in most of their usual counterparts. On the headphone body there are two holes of different sizes, central and side, one smaller, the other slightly larger and wider.

As a result, they become clogged and dirty much faster, so they will have to be cleaned regularly. So, to clean your Apple headphones from wax and dust as safely as possible, you will need:. All these attributes can easily be found in any apartment. If you don't have peroxide, you can find it at your nearest pharmacy. In extreme cases, you can use alcohol, regular ethyl or boric alcohol, for example, and even vodka.

Alcohol disinfects and kills germs well, but peroxide works better with sulfur. First stage. First you need to carefully walk a toothpick along the contour of the grate: both central and side. If you do this carefully and correctly, the chance of sulfur particles getting inside will be minimal. You should start with a toothpick, since a cotton swab is larger in volume and is much more likely to get dirt under the grate. Cleaning pots is not an easy task. We advise you to find out how to wash a stainless steel pan.

Read: how to get rid of the smell of dampness in your apartment. Second phase. It should be moist, not wet. Under no circumstances should liquid be allowed to drip from it.

To do this, it is recommended to blot the stick with a napkin. You need to choose a place for the procedure that is as lit as possible in order to see the smallest details and not miss anything.

The third stage is wiping the diffusers of the grilles. Again, it is important to do everything very carefully and not press too hard. For a better effect, you can rotate the stick in your fingers, performing rotational movements. Just in case, it is better to turn the earphone with the speaker down, so that if there is still a lot of liquid on the stick, a drop will not get inside. Fourth stage. Repeat the procedure with the second earphone. It is the dirtiness of the grille on the speaker that primarily affects the sound quality.

This is if there is no mechanical damage to the EarPods themselves. Many users complained about deterioration in the performance of one of the headphones, loss of bass, etc., but after proper cleaning, all these problems disappeared. But it's not just diffusers that need regular hygiene. If the headset is used actively, stains may also appear on the wires, dust and dirt, even pieces of food may stick, and they may also turn yellow. How to clean white Apple headphones so they look like new again?

It's simple. A cotton swab and a napkin are moistened with the same alcohol or peroxide, and all insulated elements are wiped. Of course, you don't need to touch the plug. There are a lot of extreme options for cleaning your headset online. Some claim that they washed it in a washing machine, and after that the headphones not only remained working, but all problems with sound were resolved.

Others dipped them completely in the same peroxide so that the sulfur was corroded, even if it went deep under the grate. And again, there are many positive reviews about this procedure. Exactly the same as the method using a toothbrush. If you use headphones constantly, it is recommended to clean them at least once a month. Particularly desperate users even tore out the mesh directly in order to clean the iPhone headphones as thoroughly as possible.

But all this is done at your own peril and risk. No one can guarantee that after cleaning, especially such extreme cleaning, the headset will work.

We recommend that you find out why an air ionizer is needed. Read: how to choose a mop with a spin. Find out what to do if your washing machine doesn't work. To summarize, it should be noted that cleaning headphones at home is very easy.

The procedure will take no more than 10 minutes. The main thing is to do everything carefully, slowly, and not try extreme methods. If you do it regularly, you can enjoy good sound for a very long time.

How and with what to clean Apple EarPods from iPhone? About cleanliness Caring for equipment. Ksenia Lapskaya. Sergey Shatalov. Anna Andreeva. Did not find an answer to your question? Ask our writers: Ask a question.

How to clean your EarPods

An important point you need to know about cleaning Apple EarPods is that it is strictly forbidden to wash them under running water, as this can permanently damage the design of the headphones. In addition, do not use sharp objects or any abrasive materials.

To wipe the headphones, you will need a dry, soft, lint-free cloth, as well as cotton swabs. Before proceeding with the cleaning process, make sure that there are no traces of moisture in the holes.

Using a dry cotton swab/brush, you can gently clean the microphone and speaker grilles. Dirt accumulated in the joints and on the edges of the mesh can be very carefully removed with a toothpick. After the procedure, do not forget to wipe the device with a dry microfiber cloth.

For comfortable use of headphones, you also need to clean the Lightning connector, for which you should use the same dry and soft brush.

What to do with the original Apple headphones - they turned yellow

Login via. On AliExpress we offer thousands of varieties of products of all brands and specifications, for every taste and size. If you want to buy a mototestor diamak diamak2 mototester 2 and similar products, we offer you a choice of items, among which you are sure to find options to suit your taste. If specific characteristics tell you more than obscure names, perhaps the following information is for you: for the entire volume of products found for your query “mototestor diamak diamak2 mototester 2”, Material can vary over a very wide range, there are Polyester, Other, COTTON , and which ones there are not yet. Buyer Protection.

The main disadvantage of Apple devices is the photo fact

Every self-respecting smartphone manufacturer equips the box with its gadget with branded headphones. Often these devices are not of excellent quality, and users, especially demanding audiophiles, have to separately purchase a more suitable model. But the most popular brand in the world went a different route. These headphones are so high quality that rarely anyone has the desire to exchange them for something else. After all, if the sound quality has noticeably deteriorated, but you want to correct the situation with minimal loss of finances, because new original EarPods are not cheap. Until the appearance of EarPods last year, iPhones and iPads were equipped with the more familiar Apple Earphones with a large round mesh on the speaker. Naturally, it is more profitable for her for the user to purchase a new product to replace the broken one, rather than repair it.

Caring for your headset

It is the dirtiness of the grille on the speaker that primarily affects the sound quality. This is if there is no mechanical damage to the EarPods themselves. Many users complained about deterioration in the performance of one of the headphones, loss of bass, etc., but after proper cleaning, all these problems disappeared.

But it's not just diffusers that need regular hygiene. If the headset is used actively, stains may also appear on the wires, dust and dirt, even pieces of food may stick, and they may also turn yellow. How to clean white Apple headphones so they look like new again? It's simple. A cotton swab and a napkin are moistened with the same alcohol or peroxide, and all insulated elements are wiped. Of course, you don't need to touch the plug.

Important! With systematic care and respect, any headphones will last a long time.

Unusual but dangerous methods

There are a lot of extreme options for cleaning your headset online. Some claim that they washed it in a washing machine, and after that the headphones not only remained working, but all problems with sound were resolved. Others dipped them completely in the same peroxide so that the sulfur was corroded, even if it went deep under the grate. And again, there are many positive reviews about this procedure. Exactly the same as the method using a toothbrush.

Advice! If you use headphones constantly, it is recommended to clean them at least once a month.

Particularly desperate users even tore out the mesh directly in order to clean the iPhone headphones as thoroughly as possible. But all this is done at your own peril and risk. No one can guarantee that after cleaning, especially such extreme cleaning, the headset will work.

To summarize, it should be noted that cleaning headphones at home is very easy. The procedure will take no more than 10 minutes. The main thing is to do everything carefully, slowly, and not try extreme methods. If you do it regularly, you can enjoy good sound for a very long time.

How to clean wax from headphones? The more often you wear such a miracle of modern technology, the sooner you notice that the sound changes over time: it becomes quieter, the quality is no longer the same as it was before, the bass noticeably decreases. There are two obvious reasons for this: the wires are damaged or the speakers are clogged. If headphones remain in your ears for most of their life, they become clogged faster. What can be a source of pollution? Of course you!

The ear tirelessly produces earwax, which ends up in the ear canal. This viscous, viscous substance has a yellowish tint. It is this waste product that gets clogged into the speakers, making the sound so bad. A few simple and practical tips will allow you to give them a second life, and you will save on buying new ones.

How to bleach the wire from iPhone headphones. How and what to clean Apple EarPods from iPhone

The iPhone 5, released this year, received significant changes not only in design. Apple has ditched the old charging port and over-ear headphones used in the iPhone 4 and iPod. The new model comes complete with ergonomic EarPods with a non-separable case. Over time, even with careful handling, the speaker mesh gets dirty and then users think about how to clean their iPhone headphones. Wired EarPods come in two versions: with a standard 3.5 mm connector and a Lightning contactor.

Is it possible to disassemble EarPods?

The first question that many people have is: is it possible to disassemble iPhone headphones?
It is possible, but it is not recommended to do this unless absolutely necessary. The engineers of the company from Silicon Valley did a good job, making durable headphones that are highly resistant to mechanical stress and moisture. They deprived their housing of various latches, so if you disassemble them, then when reassembling you will have to use glue to securely fasten the spare parts of the housing.

To disassemble the headphone control panel, you will need a guitar pick. Either from the side of the “+” button or from the side of the “-” button, using a pick, you need to carefully crawl under the remote control body and carefully remove its top cover. After this, the entire structure with all the boards will open to your eyes.

In order to disassemble the headphones themselves, you will need a small scalpel. By carefully running it along the seam, the headphones will separate into two parts. In one of them there will be a speaker with the rest of the components, in the other there is a mesh through which the sound comes.

As mentioned above, for reassembly you will need an adhesive moment. A thin layer will need to be applied to the seams of the body parts and carefully glued together. After this, it is recommended to leave the headphones in several parts so that the parts are securely fastened together. How the headphones will be protected from moisture and dirt in the future depends on the accuracy of reassembly.

How to clean white headphones

This is evidenced by the prestigious international Red Dot Award for best design, which the company received this year. The cable meets the latest trends in electronics design and is made in today's popular shade of rose gold. The accessory will look good with both the newest models of Apple gadgets and those that have been on the market for several years. This solves the main problem of chargers with a Lightning connector - creases and, as a result, rapid failure of the cable. Even with daily use, the wire will last a long time, the manufacturer claims. Its length is 90 cm, so gadgets can be charged even from the back seat of the car.

As an avid iPhone, iPad and Mac user, he knows all their pros and cons. However, there is a flip side to the coin: after a year and a half, the iPhone cable became unusable. Within six months, stretch marks appear on the new cord. MacBook chargers are a separate pain, he writes.

It has long been known that headphones are one of the best carriers of health-threatening diseases. They harbor ear fungus, as well as staphylococci, streptococci and influenza. Headphones live in unknown pockets, so they quickly lose their appearance. The same EarPods turn first into gray and then into yellow.

But I have a solution. For myself, I have long chosen 5 cheap items that can be bought at the pharmacy. They will help wash any type of headphones from both microorganisms and common dirt.

How to clean Airpods at home

The preventative measures recommended by the manufacturer are, according to many users, ineffective. And cleaning with isopropyl alcohol is unsafe for health. This substance is toxic and flammable.

Home craftsmen have tried officially unrecommended cleaning products on Earpods and other “ear” models. We are talking about hydrogen peroxide and medical alcohol. This procedure should be used at your own risk. In this case, precautions must be taken.

Important. To prevent damage to the gadget's lithium-ion batteries, do not allow cleaning liquid to get inside the earbuds and case.

To carry out the procedure, you should prepare the following available materials:

• cotton pads and sticks;
• napkin or piece of soft toilet paper;
• toothpicks;
• a brush or toothbrush with soft bristles;
• 3% solution of the above product;
• medical alcohol;
• mini vacuum cleaner for cleaning computer equipment.

1. Dip the earbuds, with the speakers facing down, into the cleaning solution for a few seconds, so that only the meshes are wetted with the solution. The dive must be extremely careful. The liquid is not allowed to penetrate deeper.
2. Take out the “ears” and blot with a napkin. Using a toothpick, carefully remove the softened wax deposits from the mesh.
3. Wipe the speaker and microphone meshes as gently as possible with dry cotton swabs.
4. Wipe the body and legs with a cotton pad moistened with the product.
5. Using a mini vacuum cleaner, remove any dust that has settled in the holes.

Ear sticks

For some reason, many sites on the Internet write that sulfur and other relatively large debris from hard-to-reach areas of the headphones should be removed using toothpicks. I think this is complete nonsense. Using a toothpick can damage the membrane and other parts of the headphones, so I recommend either being as careful as possible when doing this, or giving preference to ear sticks.

Ear sticks are even quite suitable for removing wax from the inside of EarPods or AirPods where the protective mesh is located. And their soft “tips” will help avoid damage.

Ear sticks are suitable for any hard-to-reach and internal parts of earbuds, in-ear and on-ear headphones. If the dirt is old and dried, you need to moisten them in one of the solutions that I will talk about later.

How to remove earwax?

If you have AirPods Pro, remove the silicone tips and rinse them in warm water. If regular AirPods (or if sulfur and other sticky dirt is stuck to the grille), then first try removing it with a dry cotton swab. If this method does not help, then you can lightly moisten the stick with liquid to soften the ear deposits.

If the dirt cannot be cleaned out, then take a toothpick - carefully pry off the deposits with it, then go through the mesh with a cotton swab. You can try to twist the toothpick or stick in a circle, but without strong pressure - this may not clean, but will drive the dirt even deeper.

Cotton pads

Cotton pads are useful for removing dirt from the outer parts of any headphones or wiping them dry after using liquid products from the pharmacy.

Cotton pads are great for cleaning headphone wires. For example, if your EarPods are not yet yellow, but are already gray, you can simply wet a cotton pad with water, squeeze it out as much as possible, and wipe all their outer parts. This can help.

Cotton pads are also good for cleaning the ear pads of large over-ear headphones. Depending on the type of contamination, you can do this either simply slightly damp or soaked in one of the pharmaceutical liquids.

After any, let’s say, wet procedure with cotton pads, it is important to wipe the headphones dry.

Clean with ear sticks!

In some sources you can find information that toothpicks are the best way to clean headphones! Indeed, they are convenient for cleaning dirt from the most difficult to reach areas, but there is a high probability of damaging the membrane. Therefore, if your choice falls on toothpicks, then be extremely careful, but we still recommend using ear sticks!

Sticks are perfect for removing wax from the inside of the headphones, where the protective mesh is located. The softness of the “tips” will ensure the absence of any damage.

They are suitable for cleaning all types of headphones in all hard-to-reach places. If the dirt has dried, you can additionally use special solutions, which will be discussed below.

Hydrogen peroxide

My experience shows that hydrogen peroxide does a good job of removing all contaminants ingrained into the body. For the internal parts there are other more effective means, but for the external parts (wires, arms, body) I only use peroxide.

If the headphones are white and have already turned not even gray, but yellow, I moisten them with peroxide using cotton pads and leave them wet for 10-20 minutes. After that, I wipe them first with a slightly damp and then with a dry cotton pad. In most cases this is more than enough.

It's even easier with black ones. In principle, dirt is practically invisible on them, and after peroxide they will even shine.

The magic of peroxide

How to disassemble EarPods for cleaning if the mesh is not removable? It is advisable not to do this, since you are unlikely to be able to put it back. But this does not mean that the headphones cannot be cleaned. For this method, you will need a Q-tip and hydrogen peroxide. Detailed instructions:

After this, the headphones can already be used. But it is advisable to turn them over with the mesh side down and let them dry. This method can be unsafe if not done carefully. Therefore, there is another option, but more complex.

Formic alcohol

Formic alcohol can also be used for external use, but it is more caustic (as knowledgeable people explained to me) than peroxide, so I do not risk doing this. If the headphones are not of very high quality, you can simply damage them and ruin the entire appearance.

But it’s great for internal parts if you can’t just wipe off the dirt with a dry ear stick. For example, in AirPods and EarPods I usually wipe the mesh this way if too much sulfur has accumulated in it and it’s already like a stone.

You can also use formic alcohol to make baths for in-ear headphones. Remove the nozzles from them, pour just a little alcohol (1 mm in height) into the soda caps and attach them with clothespins so that the inner mesh is in alcohol. So they should soak for about 5 minutes.

After all these procedures, I do not wipe the headphones dry; this is not necessary.

How to clean your AirPods case from dirt

After prolonged use, in addition to the headphones themselves, the charging box may also become dirty. It can and should also be removed from all kinds of contaminants. If you have no idea how to properly clean the AirPods and AirPods Pro case, then follow this procedure:

• Check that there are no traces of moisture in the charging box;
• Wipe the case with a dry, soft, lint-free cloth;
• If this procedure is not enough to remove dirt, you can first carefully moisten the cloth in isopropyl alcohol;
• Immediately after cleaning, it is extremely important to ensure that no moisture gets into the charging ports.

This is the basic and most effective way to clean your AirPods case, but it's not the only way. For example, you can also use a vinegar solution. You will need to mix vinegar and water in a 1:1 ratio. In the resulting solution, you need to moisten a cotton swab or a toothbrush with soft bristles and clean the case. Don't forget to get rid of excess moisture with a napkin.

To the question “How to clean the AirPods case?” There is another answer: “Using PVC electrical tape.” It helps rid the box of dust, lint and dirt. To clean using this method, cut the electrical tape into small pieces and then paste them over the dirty areas. In areas with indentations, you can press the tape more tightly using toothpicks. After peeling off the pieces of PVC tape, you will get rid of most of the dirt.

Chlorhexidine

Chlorhexidine is my latest find, recently recommended to me by friends who sell hearing aids.

They recommend that their clients regularly wipe these devices with it. There are no components in it that can damage the headphones, but the antimicrobial effects are simply excellent: it will kill staphylococci, streptococci and other rubbish.

Along with it, I use ear sticks and cotton pads. The first are for internal use, and the second are for external use. Everything is fine and I’m not afraid to give headphones to friends who have their own illnesses. It’s generally cool to always have such a thing with you - for example, in a car first aid kit.

Guys, I’ve been using almost all of this for a long time and about liquids I tried to communicate with specialists who are in the know. But you still do all this at your own peril and risk, keep this in mind. However, it's better to try cleaning very dirty headphones than to throw them away altogether. What do you use?

(4.17 out of 5, rated: 6)

How to clean headphones, headphone mesh from iPhone, Earpods, Samsung, Beats, white earwax?

You will need a small handy set:

1. Toothpicks and ear sticks - 3 pcs.
2. A little alcohol or vodka
3. Napkin

Progress:

How to clean headphones with a toothpick

• Using a toothpick, carefully clean all the dirt from the headphone mesh. The work is labor-intensive, but there are no other options.
• Using cotton swabs slightly moistened with alcohol, wipe the surface of the mesh. Make sure that no liquid gets inside, it can damage the speakers.
• Then soak a clean cotton wool with alcohol and wipe the speaker grille
• We do everything very carefully to remove as much as possible all existing contaminants.
• The work takes no more than 15 minutes. If you do everything correctly and carefully, the equipment quickly takes on an attractive appearance.