How to polish watch glass: tips and tricks

Watch

• How to polish watch glass with toothpaste?
• Glass polishing with GOI paste

Over time, the dial of any watch becomes covered with plaque and small scratches. If you do not find any severe damage or chips on it, then you can remove scratches on the watch glass yourself. After treatment, your watch will shine like new and will delight you as before.

Men's watch on a leather belt, OKAMI (price on the link)

How to polish watch glass with toothpaste?

You can get rid of minor scratches and abrasions of glass using the most ordinary toothpaste . To do this, take a small amount of paste and a soft cloth. So, let's get started:

1. Squeeze a pea-sized amount of toothpaste onto cotton wool or a cotton pad.
2. Rub the product into the base using gentle circular movements.
3. It takes 10 seconds to complete the job.
4. Using a damp cloth, wipe the watch glass and areas contaminated as a result of treatment.

To work, take a soft, but not lint-free rag; the toothpaste should not contain coarse inclusions or strong flavors.

A traditional white paste of soft consistency is sufficient.

Polishing watch glass from scratches with your own hands will not give the desired results if deep chips have formed on the surface. In this case, it is better to take the device to a workshop.

It is not advisable to press hard on the glass or quickly move a cloth over the surface. Brittle material can simply crack from the applied effort. If you were unable to clean the glass surface the first time, you can repeat the procedure up to 4 times.

Glass polishing with GOI paste

You can clean deep scratches on glass using GOI paste. If possible, it is advisable to remove the glass itself from the base and carry out more thorough processing . A small amount of paste is applied to a soft, damp piece of cloth, gently spread over the surface of the fabric, and only then begin cleaning.

GOI paste for cleaning watch glasses

Gently rub the product over the glass using circular movements, not forgetting to grab each area. Please note that the unprocessed pieces will appear cloudy after cleaning. You can complete the process with soft toothpaste. Remove any residue remaining on the surface of the glass with a gentle damp cloth and wipe with mineral oil . Most scratches will disappear after this cleaning.

If you are faced with the task of not only cleaning, but also polishing glass, take GOI paste of 3 types:

• GOI No. 1,
• GOI No. 2,
• GOI No. 3.

The number designation indicates the granularity level of the substance .

That is, GOI No. 3 removes large scratches, GOI No. 2 erases minor damage, and GOI No. 1 polishes the glass surface

How to polish a watch case at home

(I’m asking a stupid question) How to polish a watch

stainless steel watches, not particularly expensive, but there is a lot associated with them, the once mirror polishing is now rapidly approaching stonewash, the brain tells me that the right solution is GOI, and it also tells me that GOI is needed for fine polishing, but where can I get it? maybe there are alternatives?

The glass will deteriorate when polishing the case, maybe it’s better not to?

and here’s the whole point, how not to spoil the glass? I think GOI for fine polishing was originally intended for polishing optics, but it’s still spectacle-quality

quote: Originally posted by Twisted Firestarter:

quote: Originally posted by Twisted Firestarter:

and here is all the salt, how not to spoil the glass?

As a human being, polishing must be done in analysis. Accordingly - to the service.

You glue off all the excess and calmly polish the GOI. Evenly, neatly. I've polished more than one watch and never had any problems.

quote: Originally posted by Twisted Firestarter:

but where can I get it? maybe there are alternatives?

polishing pastes can be purchased at jewelry stores; Dialux used to be sold there

analogue of GOI paste

Alternatively, take it to a watchmaker to carefully free the case from the mechanism, and then send the case for electroplating.

Soviet watches did not use glass, but some kind of plastic. So it was polished with toothpaste, rubbed vigorously with a cotton cloth. Do you have glass or plastic there?

I would also trust the professionals. Right now, any watch, if you value it, will restore it, make a new glass, even a sapphire. If they are not expensive, it is easier to buy new ones.

I sharpen knives, polish watches. experience hasso. dear. ))))))))))))))

IMHO, if the watch is expensive and the resource is available, go to the “Precise Move” workshop at Nagornaya metro station. If the problem is rubbed mineral glass, I advise you to try Polywatch paste. It is bought “there”. The thing is good and proven (personally). It looks like this:

There is no need to rub it with anything. This is patina. Nothing can restore it later.

ok, comrades, this weekend I’ll try to polish it by sealing the glass, it seems like the hands used to grow from the right place

quote: Originally posted by Mikha Gai:

I sharpen knives, polish watches. experience hasso. dear. ))

true jack of all trades))

quote: Originally posted by Zuzamod:

Soviet watches did not use glass, but some kind of plastic. So it was polished with toothpaste, rubbed vigorously with a cotton cloth. Do you have glass or plastic there?

plexiglass can also be polished well with GOI paste. MANUALLY!

I wouldn’t experiment with a watch that is dear to my heart. Better yet, go to a good watch shop.

Zero, then the goyim. I restored the commander’s notes in the mirror like this)

Why are you planning to polish it?

pry the rim with a knife, polish it, walk along the back of the lid

You won’t find GOI, only buy the finest “diamond paste” at the auto store

How to polish watch glass?

The glass of a new accessory always looks flawless. However, after a while, various kinds of scratches and irregularities begin to appear on it. This affects not only the appearance of the product, but also makes it difficult for the user to see the dial. In this article we will tell you in detail how to polish the glass on a watch.

Basic methods of polishing watch glass

There are many ways to eliminate unwanted streaks on your watch, and you can do them yourself.

Important! The methods that will be described below are universal, that is, they can be used on any type of glass. Only depending on each material you will have to show a different level of effort and accuracy.

This method is suitable for polishing watch glass at home if it only has small scratches. To implement it we will need the following materials:

• Fine-grit sandpaper. It can be replaced with GOI paste No. 1.
• Soap or abrasive tooth powder (paste can be used).
• Smooth surface for subsequent work.
• Soft cloth (preferably microfiber).
• Some water.

To perform this procedure, you must follow the following algorithm:

1. Remove the glass from the body, then wipe it thoroughly with a prepared rag, thereby removing all dirt from the surface.
2. Place the treated glass on a flat surface.
3. Next, you can moisten the glass with water and begin polishing with the material of your choice. The movements should be wave-like and repeated with equal pressure on the surface.

Important! During the entire procedure, you need to repeat forward movements, wetting the glass with water. In this way, the surface is brought to a matte state without any flaws.

1. Apply the required amount of powder, pre-moistened in water (you can use paste or soap), onto the freshly sanded surface. Using a microfiber cloth, continue polishing using the same movements as when polishing with sandpaper.

Important! After a couple of minutes, you will already be able to see the first results of your work, but you should not stop there. This polishing should last 10-20 minutes.

1. To complete the procedure, the polished part is inserted back into the device body.

In this case, polishing the glass on the watch will be classified as medium-depth scratches. So, here's what we need for further work:

• GOI paste numbers 1, 2 and 3.
• Leather (can be replaced with felt).
• Soap, abrasive tooth powder or paste.
• Water.
• Smooth and even surface for further work.
• Microfiber cloth.

To remove this type of scratches on glass, follow these steps:

1. First of all, you need to remove the glass from the watch case and gently wipe it with a microfiber cloth.
2. Apply a little GOI paste No. 3 to a microfiber cloth that has been previously soaked in water and begin to polish the glass on the watch using wave-like movements. When noticeable scratches have been removed, you need to replace the material used with the second number and follow the same procedure. Lastly, GOI number one is used to remove microscratches. In the end, the glass turns out perfectly matte without any flaws.
3. When the glass is dry, you should apply tooth powder (or any of the three options of your choice) to it and continue to do the same steps with a rag soaked in water. This step should take approximately 15 minutes to complete.
4. Wipe the treated surface from any remnants of used material and insert the glass back into the body.

This method is ideal for deep stripes. To polish the glass on a watch at home, you will need the following things:

• GOI paste No. 1-4.
• Medium to fine grit sandpaper.
• A piece of leather or felt.
• Soap, abrasive tooth powder or paste.
• A small amount of water.
• Smooth smooth surface.

To further remove scratches, proceed as follows:

1. Remove the glass from the case and thoroughly wipe it from possible dust or other contaminants.
2. Begin the process using medium-grit sandpaper, making a wave-like motion over the part.
3. Incorporate GOI composition No. 4 into the case - it will help smooth out and remove the deepest and largest irregularities.
4. To remove the next deepest scratches, you need to use GOI materials numbered 2 and 3, and then fine-grained sandpaper.
5. Lastly, use paste number 1 - it is this that will help achieve a perfectly matte glass state and smooth out microscopic scratches.
6. Now the frosted glass needs to be given a glossy shine. To do this, you need to polish it using soap and tooth powder.

Important! The movements should be the same as when polishing with previous materials, and the time of this procedure should be approximately 10-15 minutes.

1. Upon completion of the procedure, you should put the glass back into the movement case and enjoy a clear view of the dial.

Sapphire crystal polishing

This material requires the greatest care on the part of the craftsman, because it is the hardest and most fragile at the same time. That is why we consider this material separately.

In order to polish sapphire crystals, it is necessary to replace the GOI paste with diamond paste. The operating algorithm remains the same, depending on the depth of the scratches. The only thing you need to do is to be extremely careful during the entire procedure so as not to accidentally damage the surface completely.

In this article, we told you about three universal ways to polish watch glass to prevent scratches. To avoid frequent resort to them, it is recommended to treat your wrist accessory very carefully.

How to polish a watch

The case of a good watch is in most cases made of metal. During operation, the metal surface receives many scratches that spoil the appearance of the watch. Scratches can be removed by polishing.

- polish or paste;

Sponsored by P&G Articles on the topic “How to polish a watch” How to polish the glass on a watch How to disassemble a quartz watch How to polish aluminum

Find out the type of metal your watch case is made of by reading the technical data sheet. You should only try to polish watches with a case made of aluminum or steel. Polishing gold-plated watches is best left to professionals, as it is a very delicate and complex job.

Other news on the topic:

Glass is used in the production of many products. Unfortunately, it is this part of the watch that suffers the most, because even with super-careful handling, irregularities form on it, scratches and chips appear. All this makes the appearance of the product unaesthetic. It is possible and even necessary to fight this.

Over time, plastic car headlights begin to become cloudy. Small scratches and chips appear on them, which will not be difficult to polish. It is useful to carry out polishing before winter, when the transparency and brightness of headlights is especially important. You will need - polish; - sponge; - water; —

Glass is a rather fragile material, so you are unlikely to be able to completely get rid of scratches (especially deep ones) without damaging the surface. A variety of methods are generally used to remove scratches, from simple polishing to grinding followed by polishing. For this

If you wear your watch every day, it will eventually accumulate oil, perfume, and lotions. If your watch is not cleaned periodically, it may cause the case to corrode and the glass to darken. So let’s arm ourselves with the necessary knowledge and get started. Sponsor of P&G placement Articles on the topic “How

Before polishing the glass, it must be sanded to remove scratches. If you don’t have a grinding machine, you can get by with an electric drill, and chemical reagents will help save time. You will need a Set of powders containing abrasive particles. Must be available

It is difficult to imagine a modern person, for whom every minute counts, without a wristwatch. Today, a wristwatch is not only a vital necessity, which allows you to find out what time it is and plan your day, but also an element of style - a watch complements the image of its owner. Choose

A wristwatch is always a valuable and very pleasant gift both for yourself and for others. In order not to darken the joy of the recipient, try to choose them very carefully. Even the smallest nuances of a watch can have a significant impact on its performance and durability. Placement Sponsor P&G

Scratches on plexiglass form over time as a result of mechanical stress. You can polish plexiglass at home, but the process is quite labor-intensive and time-consuming. Glass should not be exposed to aggressive chemicals; it will become dull and unsuitable for use.

Time leaves its mark everywhere, even on watches that are designed to keep accurate records of it. Small scratches significantly spoil the appearance and also dull the previously shining dial and case. Polishing will help restore your watch to its original appearance. You will need - paste; - cotton pads;

When using a mobile phone, scratches and abrasions inevitably appear on its display, which spoil the appearance, and the display itself becomes worse because of them. There are ways to remove scratches from your phone screen. Sponsored by P&G Articles on the topic “How to remove scratches from

Professional products for high-quality glass polishing

Glass can be polished with high quality using professional products used by craftsmen. These include:

1. Diamond paste . Fine abrasive material with a paste-like consistency. Craftsmen often call it “finishing”. The paste is used as a final sanding agent or after basic cleaning.
2. "Polarite." This material comes in different grain levels. The watch glass is cleaned with fine-grained paste.

The principle of working with professional products is the same as for toothpaste and GOI. See how your Sunlight watch shines, and yours will shine the same way after professional cleaning.

Women's watch on a metal bracelet, SL (price on the link)

Rules for cleaning glass on wristwatches

If your watch glass is scratched and you decide to clean it, follow a few simple steps for convenient and quick work:

1. Spread a piece of fabric on a horizontal, flat surface to ensure good adhesion to the device.
2. Prepare your chosen cleaning products and additional materials. Typically, you may need cotton pads, a soft cloth, ear cleaning sticks, and some warm water in a small container for wetting.
3. It will be convenient to clean the joints using a cotton swab with an abrasive agent applied to it.

Cleaning sapphire crystal

The surface of this type is quite hard, and at the same time fragile. It scratches easily, and therefore any objects damage it. To avoid damaging your watch, you should treat the product with care.

If scratches appear, then diamond paste will be required for the work. The product must be applied to the polishing wheel of the machine. All other work is performed in the same way as with natural glass. The procedure should be performed carefully, and then glass replacement will not be required.

Glass is a must-have element for mechanical wristwatches and some wall clocks. Over time, it becomes cloudy and may become covered with scratches, unevenness and chips. This degrades the appearance of the watch and may interfere with the functioning of the mechanisms.

If there are deep and serious defects, it is better to contact a specialist. And shallow cracks and minor flaws can be removed using household products at home. Let's find out how to remove scratches on a watch glass.

How to clean different types of watch glasses?

To avoid asking this question in the future, before purchasing a watch, find out which type of glass covers the dial of the movement. There are 3 main varieties :

• mineral glass,
• organic glass,
• sapphire glass.

The last 2 types are used for watches of expensive brands

To clean organic glass, any abrasive material such as toothpaste or GOI paste is usually used. However, to work with sapphire crystal you will need a grinding wheel. In this case, there is no need to disassemble the glass; just put the watch on a non-slip horizontal surface and sand it. You cannot carry out processing in one place; you need to constantly move the watch so that the glass does not burst from thinning.

Mineral glass also needs to be ground , and only then a final treatment with toothpaste. Finally, use a cotton pad soaked in alcohol to wipe the surface until it shines.

Installation of organic glass after cleaning

Other ways to remove scratches

• Baking soda effectively removes scratches, greasy deposits and discoloration. It will give the watch its former presentable appearance. Mix baking soda and water in equal proportions, apply the resulting mixture to the scratch using a cloth or cotton pad, and leave for a few seconds. Then wipe the surface thoroughly with a clean damp cloth;
• Furniture and car wax, as well as polish for wooden or veneered products, are also suitable for processing glass watches. Such products are safe. They allow you to get smooth, polished glass without defects and restore its original, flawless, attractive appearance. Apply the mixture to a cotton pad and treat scratches. Repeat the procedure until they disappear. By the way, wood polish and wax are perfect for;
• Very fine sandpaper using tooth powder requires extreme care and caution. Before getting rid of scratches, you must remove the glass from the watch, wipe it with a soft, dry cloth and moisten it with water. Then carefully sand the surface with sandpaper. Dissolve tooth powder in water, apply to glass and continue processing. Leave the product to dry completely and remove the dried composition with soft paper. This cleaning will help to effectively get rid of scratches on the watch glass and extend the service life of the product;
• Instead of wood polish, you can use silver or copper polish. Apply the composition using a cotton pad to the scratches and gently wipe the surface until the scratches are removed. These polishes are great for using on silver items to remove stains and...