How to shorten a bracelet on a women's Sunwatch watch

How to reduce the bracelet on a watch with your own hands?

As a rule, most wristwatches that go on sale have a bracelet with a reserve. Thus, manufacturers of such products are trying to make their product accessible to people with different hand sizes. But unfortunately, it is precisely this excessive concern for customers that causes problems for people with graceful and small hands.

Having brought the purchase home, they have to think about how they can fit the bracelet to their hand. Of course, the easiest way to fix this problem is to take your watch to a workshop and have it checked by a qualified technician. But as practice shows, most people do not have the opportunity to do this, and for this reason they have to shorten the bracelet with their own hands. We will tell you how to do this correctly in our article.

Ways to shorten a watch bracelet

Today, leather and textile straps are especially popular, but accessories made of metal links remain unchanged classics. If in the first and second options you just need to pierce a hole in a suitable place, then not everyone can cope with the task of how to shorten a watch bracelet. There are two ways to correct the size of a product: seek help from a specialist or do everything without outside intervention, that is, on your own.

• Contact the workshop

The size of a ceramic or steel belt can easily be converted to a millimeter in the hands of a watchmaker - he will solve the problem in a matter of minutes. The work will be done carefully, and the result will not be long in coming. However, the process of extracting an extra segment is not so complicated that you need to run to the first workshop you come across. How to shorten the strap? You need to learn possible ways to remove a link on a watch bracelet, because if you love this kind of accessories, you will often encounter this issue.

• Shorten your watch strap yourself

Metal links with a clasp or stretch strap can be adjusted to fit without the help of a professional. You just need to acquire working tools. It is worth considering that any metal bracelets are designed for the widest wrists. Even branded Seiko or Kasio wrist products can be easily reduced to the desired size. There are a lot of photos and videos on the Internet, thanks to which you can familiarize yourself in detail with the conversion process.

How to make a watch bracelet smaller with your own hands

So, you bought a watch, but the strap turned out to be too big for your wrist. There is no opportunity or desire to go to a master, but how to shorten a watch bracelet? Take the simple repair into your own hands. To remove extra links or change the lock buckle, you should acquire the necessary tools and patience. Before shortening your watch strap, you should clear your workspace on the table and cover it with white paper so that all the parts and small nuts are clearly visible. You will also need:

• a pointed object or an ordinary awl;
• small hammer;
• box for small parts;
• screwdriver.

You can reduce the belt yourself in several ways. You should choose a repair option based not only on your desires, but also taking into account the model and even the brand of the accessory. For example, for Casio some changes in the buckle locks are suitable, but in Orient products only removal of the links is possible. What steps need to be taken to make a men's or women's wristwatch fit?

With buckle lock

The metal watch bracelet can be easily modified to allow the accessory to fit perfectly on your wrist. For adjustment in small sizes, a lock buckle is made:

1. Remove the eyelet or locking font by pressing on the visible area.
2. Move it to the hole that is closer to the latch.
3. The font does not need to be moved from the side where it was, because when worn, the ear will cling to clothing and cause inconvenience.

Removing extra links

How to shorten a watch bracelet if adjustment using a buckle is not possible? The number of links should be reduced:

1. Press out the pin on the links according to the arrows - they are marked on the inside of the belt. Find a narrow hole in the segments you want to remove and use an awl to press down on the rod. If that doesn't work, tap the milk gently.
2. When the rod appears, grab it with pliers and remove it completely. Repeat with the second pin of the selected link. The initial stage of how to remove links from a watch bracelet is complete.
3. Check the correct removal by placing the accessory on your wrist and connecting its ends. The product should not squeeze your hand. Shorten the length symmetrically on both sides so that the latch is in the middle.
4. We assemble the bracelet by placing the hole at the same level and securing it with a hairpin.
5. This method is suitable for most models of men's and women's accessories. There is nothing complicated about how to shorten a watch bracelet.

How to choose a watch based on your wrist size

To choose the right watch size for your wrist, you need to pay attention to the main characteristics of the bracelet:

— Width — where the strap is attached to the device body. It is measured in millimeters (mm) and represented by even numbers ranging from 6 mm to 32 mm. Sometimes the width of the belt is indicated by two numbers - they are used to determine the shape of the bracelet: straight or tapering towards the buckle. Often you can also trace the relationship between the width of the bracelet and the diameter of the dial as ½. For example, if the case size is 39 mm or 42 mm, the belt size will be 20 mm.

— Length — depends directly on the circumference of the wrist. Walkers should be worn a little loosely so that marks do not remain on the skin. The table with watch sizes will help you figure out the length of the strap:

Bracelets are usually marked if they are size L or XL. They do not have standard markings.

Do not neglect the help of specialists. In jewelry stores or special salons, employees can easily help you determine the size of the watch on your hand, as well as choose one or another model so that the product looks beautiful and emphasizes your image.

In this article, we asked the master to answer the question: “How to reduce the Milanese bracelet on a Sunlight watch?”, and also give useful recommendations for our readers. Read on to find out what came of it.

If you look at the history of this accessory, you can understand that such a metal strap was invented a very long time ago. This bracelet is simply a modern variation on the classic Milanese strap. This weaving was invented in Milan at the end of the nineteenth century.

The modern Milanese bracelet is still created using Italian equipment. It is created from a smooth mesh. It is made of high-quality stainless steel, which should protect the bracelet from the negative influence of the environment. Now bracelets with such weaving are actively sold. But it is straps of this type that deserve most attention, which complement the so-called “smart” watches.

This mesh bracelet definitely has its disadvantages and advantages. Let's look at these pros and cons.

• It’s worth starting with the positive aspects, because there are definitely more of them than the negative ones. To begin with, it is worth noting that the strap is made in a unisex style. It will look equally good on both a man’s hand and a fragile girl’s wrist. The main thing here is to choose the right size of both the bracelet and the watch.
• In the photographs the weaving is slightly different from how it looks in reality. This difference is not at all critical, but still, before purchasing, it is better to first look at the product in reality, and not in pictures.
• Another advantage of the mesh strap is that it is very resistant to environmental influences. While rubber straps fade and fade, and leather straps warp, a stainless steel bracelet remains durable and attractive. The point here is the weaving features that make it as stable as possible. Some buyers complain that over time, this type of strap begins to scratch the smooth dial, which spoils the appearance of the watch. But these scratches can be easily removed with a simple polish and a few minutes of free time.
• In addition, a bracelet with this type of weaving fits well on the hand. You can’t just pull it off your wrist without your permission. The clasp is attached to a special magnet, which secures the strap well. However, during the day you still have to tighten it, because the fastening weakens during wear.

How to remove links from a watch strap

Almost always, a new metal watch bracelet needs to be adjusted to fit your wrist. The easiest way is to ask for help at your nearest watch repair shop. The work does not take much time and for a small fee, in the presence of the client, they will carry out all the necessary manipulations for the bracelet.

This is interesting: Aldehyde Face Mask

But if the owner of a new watch has time and the desire to carry out all the simple work himself, this will not cause big problems.

Removing unnecessary links

As a rule, such an operation is performed on a new watch. Therefore, there is no need to rush and remove the protective film from the watch case. It's better to leave the film.

Then we put the watch with the bracelet on the wrist and count how many links need to be removed.

Important! In order not to move the clasp to one side, it is better to remove the links in pairs on one and the other side of the bracelet latch.

After we have decided on the length of the bracelet, we will prepare the necessary tools for the job:

• A thin awl or a large needle;
• Needle nose pliers, pliers;
• Something like a nut or bushing.

Upon careful inspection of the bracelet, it is clearly visible that the links are connected to each other by pins and the direction in which these pins need to be pulled out is indicated on the back side in the form of index arrows.

Knowing which link needs to be removed, place the part of the bracelet on the sleeve on which the necessary manipulations need to be done, with the arrow pointing down.

Using a thin awl, press the fastening pin down from the link until the opposite end appears on the back side.

Use pliers to rotate the pin and pull it out of the bracelet.

They do the same on the other side of the link. The link and pin are set aside, and the bracelet is connected again with a pin.

The entire bracelet is shortened by one link. The segment on the opposite side of the clasp on the watch is removed in the same way.

As an example, the procedure for two links is described. The length of the bracelet depends both on the circumference of the wearer’s wrist and on the type of watch case. It may be necessary to remove more links. The main thing is to maintain symmetry of the clasp relative to the wrist and body.

Assembly is carried out in reverse order. The links are inserted into each other's grooves and secured with a pin. The pin is inserted into the hole with its sharper end on the opposite side of the bracelet and driven lightly with a hammer to the edge. Don't forget that the arrow shows the direction of disassembling the strap.

After completing the work, connect the extra links and studs together and save them just in case.

We put the watch on the wrist again and check how comfortably the bracelet fits on the hand.

This way you can fit a metal link bracelet to your hand for most watch models.

How much to shorten and how to properly remove links from a metal strap

Before removing excess links from a watch bracelet, you need to understand how many of them need to be removed. To do this, put the watch on yourself, turn your hand over with your wrist and the clasp up. Use your fingers to collect the excess elements until the length is optimal for you. Please note that the wristwatch should not squeeze your wrist too much, but it should not dangle or move too much.

Count the number of extra links. It is better to leave one element more than to put it back on again later. If you can’t decide on the appropriate length, take off one element at a time and try it on each time.

They must be removed from both sides of the clasp at the same time so that the belt maintains symmetry and the clasp remains exactly in the middle.

Stretchable metal bracelet

Before work you need to prepare the tool:

• Thin awl;
• Thin flathead screwdriver;
• Needle nose pliers;
• Small hammer;
• Measuring tape (better for sewing work);
• Container for parts;
• Magnifying glass (loupe).

You need to wrap a flexible tape measure around your wrist to find out how much the wrist circumference differs from the actual length of the bracelet. This way you can avoid mistakes when removing links.

The length of the strap can be determined in another way. To do this, one end of the strap is disconnected from the watch. The watch strap is applied to the wrist, and the free end is wrapped around it. We count how many links overlap each other. To the resulting number of extra links we add one more. As a result, we get the required number of extra segments.

Further work is carried out in the following sequence:

1. Separate the metal strap from the watch case. This will make it easier to shoot the segments.
2. Turn the bracelet so that it faces you. At the end, the selected section of torsion bars is bent.
3. Open the torsion clamps located below. Finding them is very easy. They are located to the left of those staples that have already been bent.
4. Segments are easily removed by sliding the desired part to the side. This action also releases the connecting brackets of the links.
5. Let's put everything back together. Before snapping the torsion clamps, we secure the connecting brackets on both sides of the bracelet. Do not rush when working so as not to scratch the polished metal surface of the watch.

What tools will be useful

To work you may need the following tools:

• screwdriver 1 mm wide;
• awl or thick needle;
• magnifying glass;
• needle nose pliers;
• pliers;
• tweezers.

It is better not to use such “home” devices as pins, paper clips and sewing needles. When working with them, there is a risk of breaking them, as well as damaging the watch bracelet. Most often, a standard set of construction tools is sufficient for shortening.

If the strap or bracelet is too big

When the bracelet dangles on the hand, the watch owner experiences a feeling of discomfort. If the fixation is poor, the watch can quickly fail. The first thought that arises in such a situation is to go to a workshop and completely change the strap on your watch. There is no need to rush: if the belt is leather, carefully pierce a hole in it with an awl heated over a fire. You must act carefully so as not to burn the skin. The red-hot tip of an awl or knitting needle pierces the skin in the right place. After the puncture, the instrument is quickly removed so that the material does not melt.

Advice!

Before piercing, mark the desired location so that you do not have to make another hole.

A watch with a strap made of soft material can be adjusted to fit your wrist at home, but if you get a model with a cast bracelet, you can’t do it without the help of a specialist. Manufacturers provide for “adjustment” of metal models with links to the size of the owner. Removing a link from a watch bracelet is not difficult: it does not require special skills. You will need accuracy and a few simple tools.

This is interesting: How to wash white soles on sneakers

How to remove an extra link on a watch bracelet that is secured with a locking element

Before removing a link from a watch bracelet, you need to select and prepare a workplace:

• the surface should be flat and well lit;
• It is advisable to cover it with a towel, tablecloth, other soft cloth or white paper to avoid the watch slipping, accidentally scratching it and losing small elements.

If a new watch has a protective film on its dial, it should not be removed until work on the bracelet is completed.

Removing excess links at home must be done carefully and carefully so as not to damage the watch case and dial.

To reduce the length of a bracelet by a link connected by a straight pin or pin, follow these steps:

• Using the object selected as a “pusher,” gently press the locking element
  in the desired direction until the opposite end of the element begins to come out of the bracelet. For convenience, it is advisable not to hold the bracelet in your hands, but to place it on its edge, for example, on the rubberized handles of pliers, so as to provide the lock with free downward movement. If the locking element is not pressed out, you can lightly (lightly!) tap it with a hammer;
• Using pliers or another tool, grab the exposed end
  of the locking element and pull it out;
• remove the second locking element from the other side of the link in the same way. Put unnecessary elements aside, in a visible place;
• Connect
  the remaining adjacent links on the bracelet by inserting one of the removed locking elements into the grooves. In this case, it is necessary to ensure that the direction of its installation is correct.

The straight pin can be additionally sealed in the grooves with tubular clamps

. Due to their miniature size, they must be handled with special care as they are very easy to lose or get damaged by the “pusher”.

The removed excess links along with the fastening elements should be carefully collected and placed in a box or bag with a sealed zip fastener. They will come in handy if in the future the need arises, on the contrary, to increase the bracelet on the watch.

Similar actions are performed if it is necessary to shorten a bracelet with links connected by plate elements.

Usually watch workshops have special instruments

, allowing you to quickly and easily remove the fastening elements and remove the strap. If necessary, you can purchase such a device and use it at home. It is miniature, inexpensive and effective. Although, of course, the experience and skills of a watchmaker cannot be bought just as easily.

Tools for work

Before starting work, cover the table with a white sheet of paper so as not to lose small elements: nuts, links, pins. To remove links from a watch bracelet, you will need:

• awl;
• small hammer;
• screwdriver with medium bit.

Collect all small parts in a separate container. They will be clearly visible on white paper. To collect them, select a small box and place it in front of you. Also make sure there is good lighting and clear your workplace of unnecessary items.

How to remove extra links on a strap at home

There are two most common options for fastening elements: rod and plate. They are used in most metal products, regardless of the manufacturer.

Shortening a strap with a pin

Those elements that are marked with an arrow or other similar mark are subject to deletion. Take the accessory and turn its end onto the links so that the installation locations of the rods are visible. The rods must be pulled out in the direction of the arrows indicated by the manufacturer.

To remove the rod, place the bracelet on its end. Place something under it so that the area directly under the pin is open. Press down on the pin with an awl or needle, and then lightly hit the awl so that the pin comes out on the other side.

When the pin appears slightly on the surface, pull it out with pliers or another suitable tool (you can even use your fingers). Once you pull out the pin, the belt will be disconnected. The same thing must be done again on the other side with the second rod to remove one element. If you need to remove more elements, repeat the procedure with removing the pin again.

To re-attach the bracelet, connect the remaining links and insert the rod in the direction of the arrow (that is, simply repeat the previous step with pulling out in reverse order). To ensure that the pin is finally in place, you can lightly press it with a handy tool.

Shortening a belt with a plate inside

Just as in the previous option, select the links that have special arrows on them (they can be removed without any problems). Insert an awl or a small screwdriver into the indicated hole inside the strap, press and pull out the internal fixing element. After the locking element is removed from one side and the other, the central link can be pulled out and the side links can be connected using the same locking element. Finally, press the plate with an awl or other handy tool so that it falls into place. Ready!

For more information on how to remove links in a watch bracelet, see the following video:

Shortening a Screw Belt

This version of the product is less common, but, nevertheless, sometimes still found in production. It differs from a rod fastening in that the screw has a head, which must not be knocked out, but unscrewed with a special screwdriver of a suitable size. For more information on how to shorten a product with this type of fastening, see the following video:

Source



Bracelets that cannot be shortened

The following types of bracelets cannot be shortened:

• leather straps with fixation, like trouser belts;
• stretchable models made of leather or leatherette. During donning, they are stretched, and then mechanically compressed, covering the wrist;
• cast models made of metal alloys, ceramics, artificial or natural stone.

Nowadays these models are rare, so lovers of “vintage things” especially value them. If the size is right, people wear such watches with pleasure, but, unfortunately, it is impossible to shorten or increase the strap on them. Cast bracelets look beautiful and stylish, but it is also impossible to adjust them to size, and even a workshop will not help here. Therefore, when choosing, you need to take into account the wrist circumference of the future owner, so as not to make a mistake.

We remove the link ourselves

It's easy to make a metal bracelet on your watch smaller. Its links are fastened to one another using ordinary pins. First, select the fragment to delete. The first two links have significant differences from the others. There is no need to remove them: it is better to use the third or fourth one.

Place a small nut or other metal object under the selected segment. Carefully insert the awl into the hole and press down on the pin holding the links together. You can pull out the pin using a hammer: lightly tap it on the awl. Inside you will see directional arrows. They show the direction in which to remove the fasteners. If you don't have a hammer, try to remove the fastener from the bracelet by pressing on the tip of the pin.

A rod will appear from the groove, which must be grabbed with pliers and pulled out. In the same way we remove the other pin. If you manage to remove one link, but the watch continues to dangle on your hand, you will have to reduce the belt by another fragment.

General recommendations for removing locking elements

Non-screw locking element

is removed from the bracelet by squeezing or carefully knocking it out.

To do this you will need some tools:

• a “pusher”
  for a pin or stud, which can be any thin object, possibly with a pointed end, for example, a paper clip, an awl, or a precision screwdriver. To remove plate elements, you should use a tool with a wider end. It is not recommended to take objects that are too sharp (sewing needle, compass), since you can damage the latch itself. In any case, it is necessary that the diameter or width of the end of the “pusher” be less than the width of the retainer groove;
• small hammer
  ;
• pliers, pliers
  or tweezers.

Screw pin

Unscrew it using a screwdriver of the appropriate size. This type of retainer is easy to visually recognize by the presence of a slot on the head of the pin.

The symmetrical arrangement of the case and clasp will ensure convenient and comfortable wearing of the watch in the center of the wrist.

Usually the manufacturer indicates with arrows on the inside of the bracelet the direction for removing the fixing elements. Unmarked links should not be removed

.

If the direction is not indicated

not on any link, then you need to visually determine where the heads of the pins, thickening on the studs or wide areas of the corner elements are located. Squeezing or knocking out the latch must be done from the opposite side.

Removing multiple fragments and reassembling

When removing several fragments, make sure that the remaining parts of the bracelet are symmetrical. The main thing is that the item does not lose its beauty, looks symmetrical and does not cause discomfort when worn. If you removed a link from the left side, then remove the fragment from the right side of the clasp. It is advisable to remove an even number of links. After successfully completing the fitting, reassemble the bracelet:

• connect the links by inserting them into each other (you need to get into the grooves);
• secure the elements with a hairpin, following the instructions stamped on the bracelet;
• if you disassembled clockwise, reassemble counterclockwise;
• Gently tap the pin with a hammer.

On a note!

The removed segment can be used as a spare one in the future, so do not throw away the remaining elements.

Working with the lock and strap of the clip

To reduce the bracelet by 1-2 cm, you can use its lock. The spring-loaded rod inside the lock must be handled carefully so that it does not bounce off, get lost or fall apart.

We shorten the strap by working with its lock:

• unfasten the bracelet;
• press the pin onto the stop pin;
• move the first pin into the hole that is located close to the next one. The second pin is on the other side of the lock.

The sliding lock with a clip is easy to use. If you need to reduce the size of a bracelet with a clip, move the clasp along one of the strap segments. So, you will adjust the diameter exactly to your wrist. Take a screwdriver with a flat bat and use it to lift the tab that holds the lock. Move the bracelet away, move the lock to the desired length and lower the locking petal again.

In order to shorten your watch bracelet yourself, you will need patience and accuracy. If you do everything correctly, this will save you from having to contact a specialist.

What should I do if my watch strap or bracelet is too big?

To avoid discomfort, it is often necessary to adjust the size of the bracelet to your hand so that the watch is securely fixed, but the bracelet does not squeeze your hand. If the strap or bracelet is too big for you, do not rush to replace it.

Adjusting a leather watch strap to its length is as easy as shelling pears; you just need to pierce another hole in the right place so that it does not dangle on your wrist. If the bracelet is ceramic, then you cannot do without a visit to the workshop, but you can reduce the iron strap yourself.

Reduce watch strap

Typically, a metal bracelet is designed to fit the widest wrist, allowing the wearer to adjust it to the desired size.

You can do this either by contacting a workshop or by yourself.

No supernatural skills are required , and you can easily remove the links and shorten the bracelet using available tools.

This is interesting: Michael Jackson in Childhood

What tools will you need?

To reduce the strap of a metal watch, it is most convenient to work with tweezers, a thin awl, a small screwdriver, pliers, a pin and a small hammer. If you have a regular Chinese tool kit , then you will find everything you need there.

Tools for changing the length of a watch bracelet

It is necessary to carefully prepare the workplace : remove everything unnecessary from it and cover it with a large sheet of light-colored paper so that all the details are clearly visible. It is advisable to place the same sheet in front of the table in case some small part falls. Place a small container on the side of the table for small parts.

What bracelet models cannot be shortened?

But first, it’s worth warning that although most manufacturers produce watch bracelets whose length can be adjusted, there are models that cannot be adjusted :

• leather straps with a locking mechanism the same as on a trouser belt;
• stretchable straps consisting of links with a spring; When put on, they first stretch and then compress according to the volume of the hand.

Today, these types of straps have become a rarity , however, they also have their fans who believe that they are very convenient and also look very stylish.

Everyone knows watches with a leather strap; it is precisely these watch models that cannot reduce the length of the strap:

Women's watch on a leather strap, SL (price on the link)

How to shorten or lengthen an elastic bracelet

You can adjust the size of the stretchable bracelet by removing the links.

, if provided for by its design. To do this, you need to find and pull out the U-shaped brackets holding the links together:

• place the bracelet on its edge and carefully examine how the links are connected to each other;
• determine where the retaining brackets
  . They are tiny and thin, so a magnifying glass may come in handy. If the links of the bracelet on the edges are bent, they must be straightened carefully so as not to be scratched. There should be staples underneath them;
• pry the staple with a pointed object, such as an awl, and use tweezers or needle-nose pliers to carefully pull it out. At the same time, you must not unfold or bend it, otherwise it may break;
• count the number of links you want to remove, and in the same way pull out the bracket at the second end of the section of the bracelet to be removed;
• turn the bracelet over and remove the staples on the other side;
• pull out the section of the bracelet to be removed, moving it relative to the adjacent ones;
• connect the remaining links and secure them by inserting staples.

Links on the elastic bracelet can be removed or added anywhere.

How to reduce the bracelet on a watch with your own hands?

And now everything you need to know about how to adjust the size of the bracelet with your own hands Before doing so, you need to carefully examine the case itself; a typical representative of a watch with an iron strap is this model:

Women's watch, SL (price on the link)

Shortening the length of an iron bracelet can be done in two ways:

• change the location of the retaining pin in the lock buckle;
• remove unnecessary links.

Removing unnecessary links

First you need to find out how many extra links need to be removed. Sometimes it is enough to remove one extra link, and sometimes you have to reduce the bracelet by several links. In any case, in order to disassemble it, you will have to remove one of the locking rods, which will allow you to disassemble the bracelet.

Please note: you can only remove those links that are indicated by an arrow on the inside of the bracelet

If there is no arrow, then these links are made cast and cannot be disassembled. One link can be connected to another by rods or plates. The sequence of actions is as follows :

1. To remove the links, these rods or plates will have to be pulled out using a thin tool, and this should be done in the direction of the arrows.
2. Then remove the link (or links) that are superfluous and reconnect the bracelet.
3. The rods look like little screws, but they are actually the same length as the link, and sometimes they are not that easy to push out. Then you can use a piece of paper clip 5-7 mm long: insert it into the hole and, lightly hitting it, push the rod out. To avoid damaging the bracelet, do not use a metal object; a plastic screwdriver handle is best.
4. If you need to remove more than one link, do it symmetrically, on both sides of the bracelet, so that the lock does not end up somewhere on the side.

How to reduce the size of a bracelet using a lock?

In this way, you can shorten the bracelet by no more than 2 cm, but sometimes this is enough for its size to fit .

The operation should be performed extremely carefully, since the rod is spring-loaded in the lock and can not only bounce off, but also fall apart into tiny parts

The sequence of actions is as follows:

1. Unfasten the bracelet and use a thin tool to press the locking pin, which holds the lock closed.
2. Then move the locking pin into the hole located closer to the second pin, which is installed on the lock (on the other side).

How to Adjust the Length of a Milanese Bracelet

In the classic design of the Milanese weave bracelet, its links are closely and firmly connected to each other. They are not removable, and the length of the bracelet is reduced or increased by moving the clasp

.

It is very easy to move the clasp to the desired position:

• Unfasten the bracelet and place it on a flat surface with the dial facing up;
• a small hole
  in the middle of the part of the fastener where the main fastener is located ;
• take any object with a thin end
  that can fit in this hole. If the fastening is not very tight, a regular paperclip, pin or SIM card key is quite suitable for this purpose. Otherwise, you can take, for example, a small flat-head screwdriver;
• place this object inside the hole and, applying some force, lift the latch;
• move the clasp to the new position and carefully snap the raised latch into place.