How to choose the right floor dryer for clothes and clothes

Principle of operation

Operating principle of electrical devices:

• Contactless devices are equipped with special infrared sensors that are triggered when you place your hands under the work area. The degree of sensitivity of the sensor is adjusted using a control device.

Such dryers significantly save the reserve of the mechanical motor of the device due to automatic operation.

• Contact dryers are activated by a button and operate according to a set timer. The devices are easily adjusted to the desired operating mode, regulate the hot air supply temperature and operating time.

Types of clothes dryers

Classification according to operating principle:

• Regular. Analogues of standard clotheslines are used for laying out and properly drying things. There are floor, ceiling, suspended, street and wall structures.

To save space in the room, folding appliances are used. These dryers are cheap and easy to clean.

• Electrical. They not only serve as a place to dry clothes, but also provide the necessary temperature conditions for drying.

Such devices consume electricity, so their maintenance is expensive. The use of devices is relevant in the winter season.

Electric dryers are effective, but they are not economically profitable.

Classification by purpose:

• Ceiling. Classic models that are placed high above the ceiling; if necessary, they can be lowered lower. They are made of aluminum or steel and coated with special compounds that protect against rust and corrosion.
• Wall-mounted. Built-in and folding devices are distinguished. Folding clothes dryers for balconies consist of two parts, one of which is attached to the wall. The second retractable part is attached with special hooks.

The advantage of such structures is that they save space, but the disadvantage is that they can withstand light loads.

Accordion dryers are durable and durable, can withstand significant weight loads, serve as a towel holder, and are used in the bathroom or laundry room.

Lift dryers are powerful devices that are suitable for installation on balconies and loggias.

• Floor-standing. Models resembling an ironing board. If necessary, they can be placed in any convenient place: in the room, in the bathroom, on the balcony. The advantage is the portability of the designs, which fold up after use.
• Hanging. Used in small spaces. Folding dryers are installed directly on the bathtub, radiator or interior door.
• Street . Installed for drying clothes outside. Advantages: energy savings, natural freshness of laundry and quick drying. The downside is that in winter, outdoor dryers are ineffective.

Classification by type of construction:

• Folding. Products consisting of two movably connected elements are most often found among floor structures. Compact, they can be folded and unfolded, convenient for transportation.

Horizontal models that unfold parallel to the floor are suitable for installation on a balcony. Small vertical structures can withstand heavy loads and are installed in bathrooms.

Folding models with a telescopic function can increase or decrease the size of the dryer depending on the situation.

• Sliding. Used in rooms where there is little free space (bathtub, balcony), as a rule, these are wall-mounted models. The advantage of the products is an increase in useful length if necessary.

Inertial models consist of a container with a drum. The fastening strip, extending 4 mm, is secured from the opposite wall with hooks. When the bar is removed, the ropes automatically return to the drum.

The structures are protected from dust, functional and efficient. The downside of the products is that over time the rope becomes inelastic. Console models extend by 50 cm and are easy to remove from the wall.

• “Liana.” Installed on balconies, they consist of two brackets with rollers, which are secured with screws, and ropes with cuttings and rods.

Classification by material:

• Aluminum . The material is light and inexpensive, but not strong enough; during use it oxidizes and turns black, which leads to stains on clean linen.
• Steel. High specific gravity structures are expensive. Stainless steel products do not corrode; conventional structures require a special moisture-proof coating.
• Plastic. Products with small dimensions, therefore cannot withstand heavy loads, are inferior in strength to other materials.

• Wooden. The models are pleasant to look at and durable, but the products will have to be treated with special compounds that contain phosphorus, fluorine, chlorine and nitrogen.
• Combined . The use of several materials is due to the desire of manufacturers to strike a balance between the quality and price of the dryer. Aluminum models with steel stands are often found.

What is a clothes dryer and why is it needed?

The presence of clean and pleasantly smelling linen is an attribute of a cozy home and the thriftiness of the housewife.
Proper care of clothing and textiles requires not only washing them, but also proper drying. More advanced users use automatic devices for these purposes, which are convenient, but at the same time quite expensive. But most people use floor-mounted clothes dryers, the price of which is acceptable for every housewife, and a wide range of such devices can satisfy the most demanding tastes.

People living in a private house or cottage can afford to dry clothes outside. The demand for such structures is explained by their compactness and the ability to fold, which allows you to remove the dryer when it is not needed.

The presence of additional “wings” increases the useful drying surface

FOR YOUR INFORMATION!

People living in a private house prefer to dry their clothes outside. In winter, this is advisable, since the laundry not only dries, but also acquires a pleasant frosty aroma. In summer it is much more difficult, especially in rainy weather. In this case, the ideal option would be to purchase a floor-mounted clothes dryer, a photo of which can always be found on the Internet.

Characteristics

• Common work surface . Indicates the maximum load capacity of the device. The greater the total length of the dryer rods when unfolded, the more massive and expensive it is.

Models with a small working surface are used for drying clothes, but they are inconvenient for drying bedspreads or sheets.

• Number of rods. This indicator indicates the dimensions when unfolded.
  Models with a large number of rods save space in the room, but are no less functional than large-sized products with a wide working surface.
• Number of tiers . The dryer tier consists of several rods, which are located parallel and at the same height.

Designs with 1-2 tiers are found in folding horizontal dryers, used for drying wide items, three- and four-tier models are found in vertical folding devices, suitable for drying a large number of small items.

The price and weight of the product depend on the number of tiers. Multi-tiered dryers save space indoors.

• Maximum load . Indicates the maximum permissible weight of laundry that can be dried on the device.

Wall-mounted models can withstand from 5 to 10 kg, wall-mounted ones - from 5 to 20 kg, the maximum load on floor products is 20 kg, on ceiling ones - 25 kg. Electric dryers are designed for drying clothes with a total weight of 15 to 35 kg.

Additional functions

• Side wings are folding shelves in floor-standing models that increase the capacity of the dryer; they fold out onto the work surface, so they don’t take up much space.

To save space, fix the wings in an inclined position.

• Drying shoes - models equipped with special lasts. Such designs are convenient and functional. Special heaters used to dry shoes are placed inside boots or shoes.
• Installation on a bathtub - this function is provided in floor dryers; these are special devices for attaching the structure to the legs of the bathtub. Such models are roomy, compact and easy to use.
• Transport rollers - found in heavy multi-tiered structures, ensure the movement of the dryer. Made from plastic, rubber, metal, rubber.

Rubber wheels leave marks on the floor, while plastic ones cannot withstand mechanical damage. A good option is plastic wheels with a rubber coating.

The wheels move in different directions: forward, backward or around their axis, which is convenient when turning. Clamps are devices that prevent the dryer from rolling on the floor or other surface.

• Holder for hangers - holes at the ends of the rods or stands, which are used for convenient use of the dryer. They free up additional space for the work surface and ensure the stability of the structure.
• Protection against accidental closing - locking devices that will protect the dryer from folding if there is a lot of laundry on it.

Equipment

The clothes dryer usually comes with:

• screws;
• wall plates;
• ceiling mount;
• brackets;
• rollers;
• rods;
• instructions;
• technical certificate.

Accessories

Accessories for dryers include:

• clothespins;
• plastic laundry baskets;
• clotheslines;
• drying nets;
• clamps;
• packing box.

Advantages and disadvantages of floor dryers

Any thing has its positive and negative sides. Devices for drying clothes are no exception. Each type may have its own pros and cons, but the general characteristic features apply equally to both the floor-mounted clothes dryer - a transformer and the monolithic model. The advantages of this accessory are:

• ease of installation, installation, ease of use;
• mobility and light weight, especially for folding models;
• long service life;
• low cost. The price tag may differ only for electric models equipped with additional options, for example, the ability to set the temperature;
• strength, which allows you to place a large number of things for drying;
• Folding models are easy to store: they easily fit into a closet.

When choosing, you should take into account the maximum load of the structure. The disadvantages of floor dryers are:

• the need to take into account the maximum weight of the structure to calculate the maximum amount of hanging laundry;
• some models may have poor stability;
• folding options when unfolded take up a lot of usable space;
• When placing things to dry, they have to be hung close to each other, which prolongs the time for complete drying.

Too thin rods can lead to creases. In this case, the disadvantages are rather subjective, while the advantages are more constructive, so an increasing number of housewives prefer this option for drying clothes.

Plastic dryers are distinguished by their low cost, but at the same time they have a short service life

How to choose a clothes dryer

• First, decide what items you need a clothes dryer for. If you are going to dry long sheets and blankets, then take ceiling models. Wall-mounted or removable dryers are suitable for drying small items.
• Decide on a place to place the dryer: bathroom, balcony, room, street. Wall-mounted devices are used in separate areas in the room, ceiling structures are installed on the balcony, and floor-mounted ones are installed in the bathroom.
• Choose products that are not afraid of moisture and temperature fluctuations, with anti-corrosion properties. The following materials are suitable: painted steel, aluminum, other metals, plastic, wood.

• Consider the possibility of installing a dryer in your home. To save space, prefer folding and sliding designs that, if necessary, increase the working area.
• When choosing models that require mounting the device, consider the type of base of the load-bearing wall. It must be made of brick or concrete.
• Pay attention to the packaging of the product; the more accessories, the better (rollers, clamps). Properly selected elements ensure stability and tight fit of the structure to the wall.

Dryer material

Which dryer will last longer directly depends on the material from which it is made, and this is:

1. Plastic.
2. Steel.
3. Aluminum.
4. Stainless steel.

Plastic deforms quickly. Steel corrodes, so it is coated with a layer of enamel or powder coated, but over time they crack and chip. For tips on the best dryer, watch this video: Aluminum is cheap and light, but it quickly oxidizes, leaving dark marks, and bends. Stainless steel is the most expensive and reliable dryer.

Exploitation

• When installing the dryer, choose a place with low air humidity. If the structure is mounted in the bathroom, then place it away from the shower stall and bathtub.
• Before using the dryer, wipe the surface of the product with a damp cloth and keep the structure clean. If rust or chips appear on it, it is not recommended to dry clothes on it, as it may become dirty or fade.

Dryers should be stored in a specially designated place with normal temperature and optimal moisture level. This is necessary to maintain the technical properties of the product. Before folding the product, let it dry thoroughly.

• It is not recommended to frequently fold and unfold sliding and portable structures; this may cause the mechanism to become loose and the dryer to fail.
• To clean electrical appliances, use a rag or a soft brush to clean the edges of the air ducts and the side walls of the dryer.

After finishing cleaning, wipe the surfaces of the device with a soft cloth. Do not use abrasives or substances containing chlorine.

• To avoid damage to floor-standing models, hang heavy items on the edges of the dryer; they are stronger and can withstand heavy loads.
• When purchasing an electric dryer, pay attention to its mounting; as a rule, such models operate with minimal noise.

It is better if the device is equipped with a thermostat. The structures can only be mounted on a perfectly flat floor.

Let's start choosing

It is recommended to choose dryers based on the dimensions of the living space. Agree that a massive installation in a small studio will not be functional, and will simply interfere with life.

Meanwhile, in a larger apartment you can install a large folding device. The loggia can be equipped with a hanging rope installation, and a floor installation can be installed in the kitchen. An electric clothes dryer looks good in the bathroom. What priorities need to be set:

• Calculate how much area you are willing to devote to drying clothes.
• Pay attention to how much weight of wet laundry the structure will support.
• If you are forced to save space, then opt for hanging and pull-out hangers for drying clothes. They can be installed using the walls of a bathtub, washing machine or radiators as support.
• The clothes hanger will be installed in a humid environment and will be in constant contact with wet items. Choose an accessory made from quality materials. It is advisable to buy clothes dryers made of stainless steel and durable plastic.
• The frame for drying clothes must be strong, pay attention to the quality of the ropes. Over time, they will sag under the weight of wet laundry, but the better the accessory is made, the later this will happen.

I wouldn’t want your home to turn into something like a communal apartment on wash day. In the modern world, even a dryer can be selected according to the interior. The simplest option - metal dryers - are suitable in a room made in high-tech style.

Metal dryers fit perfectly into a high-tech interior

Guarantee

The warranty on clothes dryers ranges from 1 to 10 years, depending on the manufacturer. Free service is provided with a sales receipt or warranty card.

The presentation must be preserved.

If there is a defect, parts are replaced, the product is completely replaced, or it is repaired.

The warranty is not provided in the following cases:

• traces of structural wear are visible;
• if the product is used incorrectly;
• the device was repaired by non-specialists;
• when the fastening or the structure itself is deformed;
• traces of mechanical damage are visible;
• when exposed to chemicals;
• when making design changes.

Malfunctions

Recommendations for repairing mechanical devices:

1. When replacing parts or repairing floor devices, pay attention to the distance between the slats (at least 7 cm). The larger the gaps between them, the longer it will take for the laundry to dry.
2. If a clothes dryer needle comes off on one side, bend the string a little more than 90 degrees, pull it tight, and reinsert it into the hole.
3. If the rope is stretched or torn, you should replace it with a new one (skeins of 20-60 meters are sold). You will need to unwind the structure, remove the ends and carefully pull out the rope.

Recommendations for repairing electric dryers:

• If the motor does not run, restart the dryer. Turn off the device for 10 minutes, press the operating button.
• Before starting repairs, turn off the power supply to the dryer and disconnect the ground wire.
• To clean the outlet, you will need to remove the ring from the outlet and remove any fibers from the inner flapper. We clean this area with a brush, removing various fibers from the hole.

If the outlet or tube is clogged, remove the clog, remove the connector near the hose or drill, and clean the clog.

• We inspect the gasket. To do this, hold the napkin near the doorway while drying; if it flutters, it is recommended to change the gasket. If your dryer isn't working, clean the door latch and door handle.
• We check the start button: remove the control panel, take a volt-ohmmeter, apply it to two terminals, turn it off and press the power button.

If the arrow of the device changes position, it means a replacement is needed. If the device shows 0, then the problem is not in the switch.

• Inspect the thermostat. To do this, remove the back panel of the dryer, attach the volt-ohmmeter probes to each terminal on the device.
• Replace the motor belt. We remove the front panel and the drum from the case, remove the fibers using a vacuum cleaner. If the tensioner does not turn, replace it. If the motor runs but the drum does not spin, wrap a new belt around the motor pulley.

Manufacturers

Art Moon

The company's products are made from environmentally friendly materials with good performance properties. The brand produces products at an affordable price.

The company's clothes dryers are wear-resistant, durable, and have an original design. The products are certified according to international standards. There is no official Russian-language website.

Attribute

The brand produces products for the kitchen and home. The HOME series represents products for household use:

• rugs,
• laundry dryer,
• ironing board,
• hangers.

The KITCHEN series is represented by kitchen utensils:

• knives,
• cutlery,
• glass lids.

Clothes dryers come in stable and durable floor-mounted designs. The products are certified, the price range and quality of the goods are acceptable.

Brabantia

The company produces accessories for the kitchen and bathroom. The company's products are represented by garbage cans, garbage bags, bread bins, containers, clothes dryers, which are distinguished by their stylish design and good technical properties.

Available in several functional versions. Among them:

1) umbrella dryer - a folding structure that rotates around its axis and rises to the desired height;

2) stainless steel dryers - models with anti-corrosion coating, which take up little space, are equipped with shelves for drying delicate items.

Dogrular

The company produces ironing boards, stepladders and clothes dryers. Floor-standing models with one or two tiers save space and are installed on the balcony or in the bathroom.

The products are coated with a layer of steel or plastic, fold compactly, and are not subject to corrosion or mechanical damage. 18 m long steel drying cables with a wide working surface ensure high-quality drying of large items.

To stabilize the dryer, stands are used.

Eurogold

Swiss company, manufacturer of ironing boards, clothes dryers, ladders, household aluminum and steel stepladders. The products are presented in different color variations and have a modern design.

The company's clothes dryers can withstand heavy loads, have a wide working surface, and are equipped with convenient rollers to protect the floor from scratches. Prices correspond to the quality of goods.

Foppapedretti

The Italian company produces household goods:

• clothes dryers,
• ironing board,
• stepladders,
• floor hangers,
• serving tables.

The products are made of wood. The range includes containers and cabinets for shoes, children's furniture, and gift sets.

The company strives to create non-standard products with improved technical characteristics.

Sliding dryers ilLenzuoliere or Gulliver are suitable for private homes, and compact products from the Fan series fit into small spaces.

The ironing boards of the loStiro collection have the shape of a cabinet with pull-out equipment; special Regolo ironing stools are available.

Gimi

The company produces household goods. Products include ironing boards, trolley bags, clothes dryers, and accessories.

Among the dryers, sliding, floor, hanging, street and wall structures, characterized by reliable fastening, stand out. Sliding models are used to save space.

The brand's products have an environmental certificate (ISO 14001) and a certificate (SA 8000). Ironing boards are ergonomic and easy to use. There are models with a standard configuration, in enlarged and compact versions.

We produce trolley bags, stepladders, hangers, linen bins, and stands that allow you to organize the storage of linen.

Hausmann

The company's products include clothes dryers, food storage containers, buckets, brushes for cleaning floors and windows, and folding wardrobes for clothes.

The dryers are produced in folding form, so they save space in the room, are stable and easy to care for. The length of the linen slats is 20 meters. Wardrobes for clothes are wear-resistant and come in many colors.

Containers for storing bulk products of different shapes and color variations can be purchased individually or in a set. The dishes are made from high-quality environmentally friendly materials.

The brand’s brushes and mops are made of high-tech plastic and have replaceable microfiber attachments.

Leifheit

The company produces high-quality products, offers original developments and modern design.

Products include non-electric household appliances, clothes dryers, ironing boards, brushes for cleaning clothes, hangers for ties and belts.

The products are manufactured using advanced technologies, thought out to the smallest detail, ergonomic and easy to care for. They are made of durable plastic, synthetic rubber and microfiber, therefore wear-resistant, durable and reliable.

The company guarantees the quality of its products; the price corresponds to the quality of the product.

Marta

The company produces household appliances for the home, beauty and health products. The company's products are ergonomic, functional, environmentally friendly, production technologies are constantly being improved.

The products are made from tempered glass, high-quality German ceramics, and stainless steel. Clothes dryers are stable, durable and reliable. The company guarantees product quality and has a low defect rate.

Acceptable ratio of pricing policy and quality of goods.

Meliconi

The leader in sales of brackets and accessories for household appliances produces customizable remote controls for audio and video equipment, and household goods. The company's advantage is a combination of European reliability and Italian design.

The products are made of durable materials: thick tempered glass, aluminum, black panels. The brackets have a reliable design and fit perfectly into the interior.

Metaltex

The products are represented by storage systems, kitchen goods, wall shelves for the kitchen and bathroom. The products have a protective coating that protects the interior surface of the furniture from abrasions and scratches.

Nika

The company specializes in the production of household goods. Products include ironing boards, stepladders and ladders, stools and drying racks, and lounge furniture.

Products for children are sold: sleds, sleds and strollers, children's sets (table, chairs), easels. High-quality materials and advanced technologies are used in production. Clothes dryers of the brand are durable, stable, with reliable fastening.