How to wash an angora jacket: machine, hand wash, dry and restore

Algorithm for washing angora fabrics

To properly wash angora items, it is important to choose a product. It is not recommended to use regular washing powders. They are too rough for delicate fibers and do not rinse well. You can wash clothes using a special liquid detergent for washing wool products, any washing gel or baby shampoo.

How to wash by hand:

Remove complex contaminants.
Fill the basin with water at 30-40 degrees.
Add detergent and dissolve it well.
Place the product. Immerse the hat with the outer part, wash all other items from the wrong side.
Use gentle movements to press the clothing. Do not rub or stretch too much.
Rinse in water several times.

The procedure for washing in an automatic washing machine:

If there is any, remove complex contaminants.
Add detergent and rinse agent to the compartments.
Load a beret, jacket, scarf and other items. Sorting is carried out by color scheme.
Set mode. Use Hand wash, Delicate, Wool. Or set the parameters: temperature 30-40 degrees, spin 300-400 or completely turned off.
Run the program.

Important! In order for the hat to take the desired shape, it is recommended to dry it in a glass jar of a suitable size. Select a jar so that it fits tightly and without stretching.

If products of light or dark colors are stained with grease, dust or any other kind, you need to use pre-cleaning. To do this, dilute 1 tbsp in a glass of warm water. l salt and ammonia. Soak a cotton swab in the prepared solution and work the item in the direction of the pile. Dry clothes with a terry towel. After this, you can proceed with normal washing.

Is pre-soaking necessary?

Before washing a white angora beret, you need to soak the product in a specially prepared solution. It includes:

detergent – 50 g;
table salt – 5 tbsp. spoon;
ammonia – 20 ml;
hydrogen peroxide – 20 ml.

The product immersed in the solution must be turned over several times. After three hours, you can start washing the beret or jacket using any detergent: shampoo, soap, gel.

After the operation is completed, the product must be rinsed several times and always in new water.

How to dry angora clothes correctly

Rules on how to safely wash Angora items necessarily require compliance with drying recommendations. Clothes made from Angora rabbit wool should not be dried on radiators, electric dryers or any other heating devices.

Procedure for safely drying angora items:

Allow excess water to drain. Unscrewing and using a machine spinner is not allowed. The product must be in a horizontal position during the process to avoid unnecessary thread tension.
Place a dry terry towel or sheet on the floor or table or another flat surface.
Place a product made of angora wool on top of it.
After 1-2 hours, check the lining material and, if necessary, replace it with dry material.

Important! If angora clothing is too wet, it should be wrapped in a towel. Press a little. This will transfer the water from the clothes to the towel. This will speed up the drying process.

In the room where clothes made from Angora rabbit wool are dried, adequate ventilation should be provided. This will help avoid moisture stagnation and unpleasant odors.

Choice of product

If you need to wash woolen products, the question becomes, what kind of powder can you use?

When choosing a detergent, you need to pay attention to the following series of requirements:

the packaging of the detergent must indicate that it is intended for woolen products and does not contain alkali;
the composition should not include various enzymes and bleaches;
If possible, the choice should be made in favor of liquid detergent rather than powder. Powders contain many substances that impart hardness. Liquid, gel-like products are washed out well, have minimal impact on the material and remove dirt just as well as powders;
the use of a stain remover is acceptable if it states that it is suitable for delicate fabrics;
You can wash a mohair jumper using simple shampoo.

Restoring angora clothing

Even if a jacket or other clothing has lost its appearance, you can try to restore it. To do this, do not rush to the store for special expensive products. The most effective formulations can be found in every home.

How to wash an angora sweater to restore its softness and fluffiness:

Freezer. This is the simplest method that does not require additional investment. The angora sweater should be placed in a clean plastic bag and placed in the freezer. Leave it there overnight. After this, lay the clothes out on a horizontal surface and let them warm up to room temperature. This extreme method will restore elasticity and shine to the fibers.
Glycerol. It is better to purchase it immediately along with angora clothing. While rinsing, add 1 teaspoon of product to the water. It is recommended to repeat this procedure every time you wash.
Turpentine and ammonia. Fill a bucket with warm water. Grate half a bar of laundry soap on a coarse grater and dissolve in water. Add 1 tbsp to soapy water. l turpentine and 2 tbsp. l ammonia. Soak the jacket overnight. It is not recommended to keep the product for longer than 12 hours. After this, rinse with an appropriate conditioner and dry.
Ammonia and medical alcohol. It is necessary to dissolve 1 cup of soap shavings in a bucket of warm water. Stir and add 15 ml of ammonia and 5 ml of pure medical alcohol. Soak clothes. After 10-12 hours, remove the product, remove excess moisture, and dry a little with a terry towel. Lay the jacket out on the table and cover the top with a thin cotton cloth. Iron and finish drying.

After final drying, the items should be combed with a wide-toothed brush.

Care instructions

On the product label you can always find information on how to properly care for the item. Therefore, before washing, read the manufacturer's recommendations. Among them are the general rules:

Turn the sweater inside out before washing.
Hot water causes the fabric to shrink.
Temperature changes disrupt the structure of the material.
Liquid products are better washed out of fabric fibers.
An item made of delicate material should be wrung out manually or at low drum speeds.
To dry, lay the product on a thick towel.
Wash the sweater separately from the rest of your laundry.
Put only clean and well-dried sweaters in the closet for long-term storage.

If the impact on the material turned out to be so intense that the item shrank, you can try to return it to its previous appearance in the following ways:

Wet the product again and remove the moisture with a towel. Then lay out the sweater, gently stretching it to restore its shape and size.
Add a solution of vinegar and water to the steamer container and treat the clothes without allowing the soleplate of the iron to touch the fabric. Then the heated and damp product should be carefully stretched.

Another trouble also happens: your favorite sweater stretches after washing. In such a situation, it should be re-immersed in hot water and dried near the heating device.

If you are afraid to take risks, go to dry cleaning. Using modern equipment, specialists will process the clothes while maintaining their original appearance.

Sweaters are worn by everyone, regardless of gender and age, so information about the features of caring for this item of clothing is always relevant. You should start from the properties of the material from which the jumper is made. Studying the label will help you wash the product correctly.

Some final useful tips

In order for angora items to last longer as mono, you should follow a few simple rules. How to extend the life of an Angora:

Of all the new things, angora fluff will come out in large quantities. This is the norm. This is the peculiarity of this material. But the amount of fluff that falls out can be reduced somewhat. To do this, simply wash angora items in the required mode. After things dry, you need to shake them thoroughly. This will remove loose lint.
There is no need to change the temperature of the washing and rinsing water much. A sharp drop has an aggressive effect on the fibers and they will lose their elasticity, which is extremely undesirable for the quality of the item.
Always wash items on the wrong side only, this will help maintain the integrity of the fibers.
Before cleaning, be sure to sew up buttonholes, if any. Otherwise, the loops are easy to stretch during the washing process.

Thus, it is not difficult to wash angora clothes; it is only important to follow the regime and choose a safe detergent for washing. If these conditions are met, the product will easily survive repeated machine and hand washes and at the same time retain its appearance and unique properties.

Many housewives are annoyed after washing when they see that their colored linen has faded. How to wash correctly, Items made of viscose look very beautiful and bright, but due to improper care they become very fast, Natural fabrics are expensive, but cause certain difficulties when washing. To remove contaminants you will need, Properly washing and drying a down jacket is a whole science, because due to poorly selected

Boiling pots to remove burnt jam

Stainless steel cookware, even with the highest quality polishing, is also not immune to the formation of persistent burns.

And it is in the interests of any housewife to maintain this ideal smoothness for as long as possible, because replacing rather expensive dishes due to a burnt bottom or untidy cloudy spots is unreasonably expensive.

How to clean a burnt stainless steel pan while maintaining its attractive appearance and excellent performance?

But as a relatively safe abrasive, we can recommend coffee grounds, which will help get rid of the loosest part of the carbon deposits, but are too soft to damage the metal surface.

We suggest you read: How to hide a stain on jeans

Some people successfully remove the loosest layer with wooden spatulas - they are also unable to damage the polish.

To clean stainless steel, it is permissible to use soda, but do not allow the solution of the substance to remain in the pan for a long time.

Boil over low heat for 10-20 minutes, cool and treat with a plastic brush, sponge with coffee grounds, etc.

In case of severe contamination, it is recommended not to be zealous in trying to clean everything at once, but to repeat it - it’s worth it.

Aluminum cookware retains its popularity due to its relative cheapness.

However, throwing it away after burning will not be at all economical.

How to clean a burnt aluminum pan quickly and efficiently?

But this is an option for a very thick layer of burnt marks and extensive contamination. It’s better to use mild means.

You can try to remove light black deposits by boiling with vinegar or soda, or alternately.

Long-term (at least several hours) soaking in a soda solution successfully loosens burnt marks.

For more permanent marks (especially on the inner surface), it is recommended to first boil water with vinegar, citric acid, sour apple peels, rhubarb and even potato peelings in a covered pan, and then go over with a brush, cloth, sponge with mild abrasives or soda.