The washing machine does not drain water: what to do, reasons, solutions to the problem

• Why the washing machine does not drain water: main reasons
• The washing machine does not drain water: we determine the reasons by the signs
• The unit does not drain water: do-it-yourself washing machine repair
• The washing machine does not drain water: what to do, reasons for breakdowns of units from different manufacturers
• How to drain water yourself if the drain is not working
• How to prevent filter blockages: editorial recommendations
• Summarize

Why the washing machine does not drain water: main reasons

Often the user himself is to blame for the fact that the water does not drain from the washing machine, and the equipment has nothing to do with it. For example, an incorrectly selected program in which the machine does not drain the water so that the laundry does not wrinkle. Before you suspect a breakdown, you should start small and re-read the instructions. If an incorrectly set program is confirmed, you should set the correct one and restart the washing cycle. There are often cases of kinks in the drain hose - this option is also worth checking. The hose, siphon or sewer system itself may be clogged.

Good to know!

If the siphon or sewer is clogged, water will not flow upward or out - as such, there is no pressure in the drain. After all, water is pumped not by a pump, but by a pump that is unable to create high pressure.

If the above problems are not confirmed, then the problem is in the machine itself. The automatic machine may not drain water due to:

• the filter installed on the drain is clogged;
• pump failure;
• failure of the programmer, control module, program failure;
• failure of the water level sensor (pressostat).

Let's try to understand how we can determine the cause of the failure.

Car brands and repair nuances in the absence of drainage

ELGE (LG)

In most cases, the machine stops draining water due to a clogged filter and pipe. Troubleshooting is carried out according to the above described scheme.

BOSCH

• Power off
• Check the filter and drain assembly
• View pump
• Make sure the impeller is working properly
• Check wiring
• Make sure the electronic unit is working properly

INDESIT

An Indian with peculiarities. If the water drainage is not restored after cleaning the filter and hose, then the following components need to be checked:

• Pump
• Pump brushes
• Pump motor
• Tachogenerator
• Drive belt

To check the belt, you will need to remove the rear cover of the unit. The electronic module may also fail.

SAMGUNG (SAMSUNG)

Each Samsung machine has an electronic display, which, if there is a malfunction, displays an error code in the form of numbers and Latin letters. Their decoding is indicated in the product passport. Having identified the malfunction, you can begin to eliminate it.

The washing machine does not drain water: we determine the reasons by the signs

In the absence of a drain, two options for the “behavior” of the unit can be observed - the water does not drain completely or does not drain at all, but the machine hums, as if draining. Let's figure out what becomes the root cause of this.

The water drains, but not completely: options for correcting the situation

There are several reasons for this malfunction. Let's try to list them:

1. The filter element is clogged . Often there are coins and scraps of paper left in your pockets, which fall out when washed. Small pieces of fabric may also get caught in the filter. This problem can be solved simply - unscrew the filter plug (usually at the bottom right) and clean the element.
2. The drain hose is clogged. Disconnect the hose, clean, rinse, and reinstall.
3. Threads and hair are wound around the impeller or pump shaft . If this happens, you should remove the pump and remove foreign objects. It is also possible that the impeller breaks down or the pump motor fails - in this case, the unit will have to be replaced, however, before this, you should drain the water from the machine yourself.

Important!

When unscrewing the cap, be prepared for water to flow. Have a drain pan and rags ready to wipe the floor.

We will talk about how to do this at the end of our article, but now we will deal with the second malfunction.

The washing machine does not drain water and is humming: what to do

The reasons are the same as in the previous version, however, there is one more, for which it is not the equipment that is to blame, but the person - overload. If the unit is designed for 3 kg, then you should not load all 5 into it... the automation simply will not allow the engine to spin, while it will heat up itself and may even burn out. Another reason that the washing machine does not drain water and hums may be a failure of the control module, a firmware failure, or burnout of individual contacts. If a home technician does not have experience working with microcircuits, there is no point in getting into the “brains” of the unit.

2) Drain pump

The Indesit washing machine consists of approximately 30 main parts, mechanical, electromechanical, and electronics. Some elements, such as the pump responsible for draining the water, are very loaded during the washing process. And they fail more often, having a limited service life. This is why, after working for 2-4 years, your Indesit washing machine has stopped draining water and the spin cycle is turned off, and the reason for this is the natural wear and tear of the drain pump. The pump has simply exhausted its service life and stops removing water from the washing machine tank. You need to replace the pump and the machine will be like new.

How to drain water from the tank when the pump is not working?

This can be done in two simple ways. First, you need to lower the tip of the drain hose to the floor level and place a container to collect water (if you have it connected to the sewer or to a siphon under the sink, you will have to turn it off), the water will drain out of the washing machine by gravity.

The second method is to slightly unscrew the filter cap, place a basin for water under it, and place a rag to collect the water. Just do not unscrew the plug sharply and hold it. The picture shows how to drain the water from the washing machine yourself without calling a technician. But if you drain the water, but do not understand the reason why the water does not drain automatically, then you will have to contact a specialist. Do-it-yourself repairs lead to even more serious problems with equipment. Be careful.

The unit does not drain water: do-it-yourself washing machine repair

Some washing machine malfunctions can be corrected yourself if you follow certain rules. Let's try to figure out the main problems that the owner of a washing machine may encounter. Among them:

• failure of the pressure switch (water level sensor);
• electrical wiring faults;
• electronics failure;
• pump failure;
• clogged filter or pump impeller;

What to do if the pressure switch fails

First, you need to make sure that it is the pressure switch that has failed. Let's figure out how to check it. To do this, first turn off the power to the washing machine (SM), unscrew the 2 screws from the back that hold the top cover. We remove the top and see a rounded part on the wall to which the hose fits, and several wires. This is a pressure switch.

Now loosen the clamp and remove the hose from the fitting. Instead, install a piece of hose of the same diameter, clamp the clamp and blow into it. You should clearly hear one or three clicks, indicating that the pressure switch has activated. If this does not happen, you will have to replace it.

Electronics failure: is it possible to solve the problem without calling a specialist?

This problem often occurs on SMs with a large number of functions. The set program, without completing the cycle, jumps to another, as a result of which the SM stops. Don't panic, you can solve this problem yourself. First, turn off the unit from the button and wait 15-20 seconds, then turn it on and load the desired program again. If this does not help, and the water remains in the drum again, turn off the machine completely (from the button and from the network) and wait 5-10 minutes. Then we turn it on again, load the program and wait. If the problem recurs, we can say with confidence that the program failure has nothing to do with it. Just in case, if the SM has a self-diagnosis mode, it should be turned on. By displaying an error code on the display, it will tell you why the washing machine does not drain water. All error codes are available in the technical data sheet of the unit.

Damaged electrical wiring: how to identify it yourself

To identify this malfunction, we need a multimeter. We find the pump and unhook the wires from it. Next, we perform the same procedure with the terminals on the board. We set the multimeter to sound resistance - it will be easier, you don’t need to look at the display. We call each wire individually and replace it if necessary.

Pump failure: is it possible to do without replacement?

So, the washing machine does not drain water due to the pump failure. Unfortunately, if the impeller breaks or the pump motor fails, you will not be able to do without a replacement. It’s another matter if threads and hair are wound around the shaft. In this case, we dismantle the pump, first removing the filter, and clean the shaft of foreign objects. Their presence can be determined as follows. We take out the filter, you can see the impeller inside. Let's try to check it out. It should rotate easily, perhaps with slight jerking - this is normal. If the rotation is tight, it means there are foreign objects on the shaft. If it does not rotate at all, it means that the engine is jammed, and such a unit cannot be repaired. You'll have to buy a new one.

Helpful information!

It is better to go to the store with an old pump. It is not a fact that there will be a part for your model in stock. In this case, you can choose an analogue from another model - many pumps are the same, even for different src=”https://cdn1.gadgets-reviews.com/images/images_2019/08/stiralnaya-mashinka-ne-slivaet-vodu_13.jpg” class=”aligncenter” width=”560″ height=”410″[/img]

Clogged filter or pump impeller: what actions should be taken

A clogged filter is not a problem at all. To clean it, you need to unscrew the plug (it is located at the bottom of the CM and can be hidden by a decorative hatch), pull out the filter, remove large debris from it and rinse it. But with threads wound around the impeller it is a little more complicated. Here you will have to remove the pump, only after this will you be able to clean the impeller of hair and threads. However, even novice home craftsmen can do this work. The main thing here is attentiveness and accuracy.

The drain in the washing machine does not work for other reasons

If after all the work done there are no changes, and the water still does not drain, most likely the problem is in the electronic module. Here you will not be able to carry out repairs yourself if you do not have the appropriate education. In this case, the only solution is to call a technician to your home or take the SM to a service center.

Helpful information!

Transporting an automatic washing machine to a service center is a better decision than searching for a repairman through advertisements. It may happen that a person comes to your home who knows less than you about SM, and learned how to repair them from videos on YouTube.

How to solve two main problems

Inspect and check parts if the machine not only leaks, but also does not work or, conversely, works without interruption.

The pump is leaking, the washing machine is not working

Have you noticed that the bottom cover of your washing machine is leaking? Water may leak from below directly onto the floor. Then it is obvious that the pump is broken.

Once you reach the pump, do this:

• Check the drain pipe, it may be faulty and leaking. It could be damaged, or the clamp between the pipe and the pump could become loose.
• Unscrew the pipe bolt and loosen the clamp with pliers.
• Remove it and inspect it for blockages and damage. When the pipe becomes clogged, it causes the washing machine to not drain.

• Now disconnect the wiring from the pump.
• Unscrew the fasteners and remove it from the case.

Inspect the pump. Hair and threads often get wrapped around the impeller, causing the pump to jam and prevent it from pumping water.

The pump cover unscrews - unscrew several screws. Remove the snail. Check all gaskets for integrity.

You can check whether the pump has burned out with a multimeter by measuring the resistance on the windings.

The pump does not turn off, it works without stopping

When the pump does not turn off, the problem may be in the control module. An electronic board controls the operation of all parts in the washing machine, and if it fails, similar problems are likely.

A breakdown of the pressure switch, as well as the board, can cause problems with the pump. For example, when the pressure switch does not provide information about the amount of water in the tank, the module “does not know” that it needs to be drained. Consequently, the pump does not turn on or works without stopping, as if there was water in the tank.

It is better to entrust checking and replacing the board to specialists, but you can replace the pressure switch yourself.

• After removing the top cover from the machine, you will find a pressure switch near the wall.

• After disconnecting its tubes, check them for blockages; perhaps, after cleaning, the device will work normally.
• Unscrew the mounting bolt and remove the device from the tank.

Replacement is carried out in reverse order.

The washing machine does not drain water: what to do, reasons for breakdowns of units from different manufacturers

As you know, each manufacturer has its own characteristics. Now let’s look at the most popular brands and understand why different machines do not wring out or drain the water.

LG washing machine does not drain water: possible causes and “treatment”

The peculiarity of LG brand SM is that debris rarely gets into the drain hose or remains in the pipes. It all settles on the filter, and that’s very good. If you have such a “helper”, then the only thing you need to do is not to be lazy and clean the filter more often. Ideally, this is done after every wash.

BOSH washing machine does not drain water: nuances of models of this brand

There is a rather interesting nuance here that is often overlooked. Lint and debris accumulate in the plug. Not in the filter, but in the lid. This is quite disturbing. But the sore point of these SMs is the pump. It most often fails. Therefore, there is no need to guess what to do if the washing machine does not drain the water. If the pipes and hoses are clean, it’s a pump. BOSH electronics are very reliable and rarely fail.

Indesit washing machine does not drain water: brand features, reasons and solutions

This brand has no significant differences from other brands, and therefore the actions are still the same. However, the Indesit brand has an interesting problem. After pumping water, it immediately begins to drain, i.e. The washing machine drains water constantly. There may be several reasons for this:

• incorrect connection to the sewer;
• water inlet valve failure;
• Pressostat malfunction.

If the drain hose from the washing machine is connected to a siphon, then it is raised above the floor to a certain height, and the first point can be lowered. If it goes directly along the floor, you can try to pick it up and throw it in the sink. If the “gain-drain” cycle continues, move on.

Water inlet valve: if it does not close in time, an overflow occurs, the pressure switch gives a command about an emergency situation, and the water is drained. It is better to entrust the problem with the valve to professionals. Pressostat: we have already written about checking it, but here the situation may be more complicated, and the pressure switch requires adjustment. This is also the case when it is better to trust the specialists.

Samsung washing machine does not drain water: what are the pitfalls of this brand

What should you do first if your Samsung washing machine does not drain water? In addition to all the faults listed above, SM Samsung has a tricky mode. When set to “delicate wash”, the water is not drained so as not to damage the items. Often it is this reason that baffles the housewife, especially if the SM was purchased recently. Otherwise, everything is similar to previous brands.

Troubleshooting

To find out why the washing machine does not drain water, you need to check the unit according to several parameters. The time spent searching for the causes of the malfunction is compensated by saving money on calling a technician.

How to drain the water

To empty the drum, prepare a container to catch the escaping liquid.

You can drain the water through:

• drain filter;
• drain hose;
• emergency drain pipe;
• laundry loading hatch.

It is better to start with the emergency tube, which is located in front of the drain filter. You need to open the small hatch and lower the tube down. Not every washing machine has a tube.

If there is no tube, go to the drain filter. For washing machines of different brands, the drain filter is located in different places. The part may be located behind the hatch on the front panel of the machine or under the body of the unit. The structural features of a specific model are described in the instructions.

In the first case, you need to open the square door, unscrew the screw and pull out the filter. The second option is more complicated: before removing the filter, you will have to remove the bottom.

How to drain water yourself if the drain is not working

It's pretty simple. Stock up on a container with low sides and plenty of dry rags. The water drains through the filter plug. To do this, place the container and open the cap. As the container fills, close the cap, pour out the water and repeat the procedure. So until the SM is completely empty.

How to prevent filter blockages: editorial recommendations

There are only two simple rules here:

1. Clean and rinse the filter as often as possible.
2. Before throwing things into the wash, check your pockets and take out everything that is there. Buttons, coins, pieces of rags, papers - these should not get into the pump.

As you can see, the rules are simple and quite easy to follow.

How to change the pump yourself

When your device does not spin or drain water, but you have made sure that all the parts and wires that we have already talked about are not clogged or unusable.

The pump is probably broken.

Of course, it is better to entrust diagnostics and repairs to a certified specialist, but if you want to fix the problem yourself by replacing the main element in the washer, here are some tips on how to do it:

1. First you need to get to the pump. To do this, disconnect the drain assembly where the pump is located from the device;
2. Separate the pump from this assembly;
3. Carefully disconnect the wiring supplying power;
4. Install the new element and connect it to the wiring in the same order;
5. Secure the drain assembly in its original location;
6. Plug in the machine;
7. To make sure that the water drains, perform a test wash;
8. If all these steps do not solve the problem and the water does not drain from the washing machine, contact the service center, since you are unlikely to be able to independently diagnose the cause of the stagnation.