my mink coat is wrinkled, what should I do?

A mink coat, like any natural fur, requires special care and compliance with operating rules. The material can be negatively affected by excessive humidity, rain and sleet, pungent odors, and too bright sun. If stored incorrectly, the fur may become wrinkled.

To clean and smooth a mink coat and return the product to a presentable appearance, it is better to go to a dry cleaner. However, many people prefer to carry out such procedures at home. Let's find out how to smooth a mink coat.

Two ways to smooth a fur coat

Steaming is a traditional method of ironing clothes without an iron. Before straightening the fur on your fur coat using hot steam, fill the bath with boiling water. Then carefully hang the product over the bathtub. It is important that the hem hangs at some distance from the water! After this, the product is hung in a dark room with good ventilation and left to dry at room temperature;
Take a damp sponge and run over the pile several times. Wet the fur thoroughly and then comb it with a wire comb or wide-toothed brush against the grain, and finally smooth the surface with your hands. As a result, the pile is smoothed out. After completing the procedures, shake the product and hang it to dry in a dark and well-ventilated room. When the fur coat is dry, beat out the clothes from the wrong side. This method is suitable if the fibers are slightly wrinkled after prolonged storage.

Comb

If for some reason you were unable to steam your fur coat, you can use a damp sponge. You need to “stroke” the fur thoroughly with it: run the sponge over the pile several times, thereby thoroughly moistening it. Next, using a sparse comb, the pile is returned to its original straightness. Then the mink fur coat is shaken and hung to dry.

Care

In any case, never use a hair dryer or iron to smooth a mink coat with a hood at home. The hot air that comes from these household appliances can cause great harm to the lint by drying it out. As a result of this, the fur will become fragile and thin, lose its original shine, and begin to crumble and crumble.

In order not to lead to an extreme situation, be sure to take care of your mink fur coat. Hang it on a hanger after every walk. Better yet, buy a good case for storing such clothes.

In humid weather, before hanging the product to dry, it should be carefully stroked with a comb with sparse teeth.

The following video describes in detail how to iron a mink coat without an iron if it is wrinkled.

Video review

Remember, if you systematically care for your mink, it will serve you for a very long time. Therefore, learn to monitor its condition and know what to do if the fur pile becomes wrinkled.

What not to do

Wash and iron fur coats;
Store the product folded or rolled up;
Store clothes in a case or bag made of polyethylene or synthetic materials;
Dry the fur coat on a radiator and with a hairdryer, next to an open fire, under the influence of direct sunlight;
Treat fur with various detergents and chemicals;
Hang a fur coat close to other things;
Hang the product for storage in a closet in its raw form;
Use special chemicals against moths.

How to dry?

The folds will straighten out gradually. After steaming, shake the fur coat, holding it by the sides, and let dry at room temperature. Repeat the steaming procedure if not all wrinkles are smoothed out.

There is a popular opinion among furriers that frost is the natural environment of fur, which helps the folds in the fur to smooth out. Try hanging a dry, clean fur coat on a covered balcony if the temperature there is 15–30 degrees below zero.

Dry a natural fur coat separately from other wet clothing, without direct sunlight on its surface. Do not dry fur items near heating radiators, radiators and heat guns.

What to do if your fur coat gets wet

If your fur coat gets wet from sleet or rain, shake the moisture out of the clothing after wearing it. Then hang the product on wide hangers, blot the fur and lining with a clean, dry natural fabric. After this, leave the items to dry at room temperature in a room with good air circulation. Until the clothes are completely dry, do not weigh the item or wrinkle the material, otherwise the pile will become deformed.

If a stain appears on your fur coat, dry the affected area and remove the dirt using a dry sponge or brush. Oil stains can be sprinkled with sawdust and left for an hour, then shake off the sawdust. We looked at how to smooth the fur on a mink coat and how to dry a fur product. How and with what to properly clean a mink coat, see the link https://vsepodomu.ru/garderob/kak-pochistit-norkovuyu-shubu/.

What to do if the membrane is torn

The causes of damage to the flesh include poor-quality dressing of the skin and old age of the fur. Damage to the underside of the model is a consequence of improper care. To cope with the problem, simply sew up the fur. For this purpose, it is recommended to choose a furrier's stitch. To do this you should do the following:

Fold the flesh. In this case, the pile should be directed inward.
Sew from right to left. This stitch resembles a regular overlock stitch. The key difference is that the needle is stuck into the same area twice. As a result, the connection area from the inside becomes almost flat.
After the darning is completed, the fur coat should be unrolled and the seam smoothed with a moistened thimble.

By following these simple steps, you will be able to make the fixation area as invisible as possible. If suturing the mesh fails and it continues to tear, the material will need to be strengthened. To do this, it is recommended to stick a thin strip of leather or textile onto the damaged surface. It is not recommended to use superglue for this purpose as it will crack in the area of the tear.

A good option would be to use a casein solution. This substance is sold in almost all hardware stores and has an affordable price.

To glue a fur coat made of rabbit, nutria or mink, you can use Moment glue. A piece of soft and thin tissue must be applied to the affected area. Thanks to this, it will be possible to make the seam much more reliable.

How to smooth a mink coat with hot air

In order to iron a mink coat at home in the bathroom, you will need a wooden hanger or special hangers of the required size.

Sequencing:

Hang the fur item on hangers and straighten it
Turn on hot water in the bathroom, wait until the bath fills and a cloud of steam forms
Then place the fur coat in a hot air bath

As soon as the fur begins to flatten under the influence of steam, shake the mink coat, and then take it to a well-ventilated room or to the balcony. But do not forget that it should not be exposed to direct sunlight.

You should not leave your fur coat in the bathroom for a long time, for a maximum of an hour, otherwise it will get wet from the condensation that has formed, and subsequently become deformed during drying.

If this method does not help straighten the pile, try the following method.

What to spoil the appearance

Many people are familiar with the old saying that a real man must do only three important things in life: build a house, plant a tree and raise a son. However, modern women joke that in addition to this list, every man should give his beloved a luxurious mink coat.

First of all, we note that luxurious fur coats and sheepskin coats made of mink fur are products with high performance characteristics. Look at the following photo to admire the beauty of this type of outerwear.

However, there are factors that can turn a luxurious mink model into an unsightly thing. Such negative factors are:

atmospheric phenomena: rain, sleet, too bright sun;
crowding on public transport;
getting perfume, hair care products and other sprays on the fur pile;
acrid odors: food, tobacco, etc.;
the habit of constantly carrying a leather bag with a wide handle on your hand;
careless attitude towards the product: neglect of hangers and other devices for storing outerwear, improper storage of items in the summer.

I would like to talk in more detail about the situation when a mink fur coat became wrinkled. This can happen to anyone and requires prompt action so that your purchase does not lose its visual appeal at the beginning of the new season. But what should be done and what should not be done in such a situation? After all, not everyone knows whether it is possible to iron the pile of a product with an iron or dry it with a hairdryer.

So what should you do to smooth out mink fur? And is it possible to steam a mink coat? In this matter, it is better to listen to the opinion of professionals.

Is it possible to steam a mink coat with a steamer?

Steaming fur coats after long-term storage is one of the responsibilities of a seller - a fur salon consultant. If you have a steamer, then you can steam a mink coat at home.

The main thing is to adhere to the rules for using this device, having first read the instructions for it.

Sequencing:

Your mink (or any other) coat should be placed on a wooden hanger of the appropriate size.
First, inspect the fur coat for dirt. If you find dirt, remove it using a specially prepared solution of 1/3 water and alcohol. You need to lightly wipe the surface of the fur with a sponge soaked in this solution.
Fill the steamer reservoir with clean filtered water. The equipment will last longer if you only fill it with this kind of water.
Before starting the steaming process, wait until homogeneous, thick steam begins to flow from the steamer. Drops of water falling on the fur will only ruin it
When starting steaming, you should maintain a distance of 20 cm. Allow the fur to warm up, otherwise it may end in a burn to the leather tissue
As the fur coat warms up, gradually reduce the distance to 15 cm
When you finish steaming your fur coat, shake the fur item thoroughly and be sure to hang it to dry away from other things. The fur coat should completely dry and straighten out.

For reference. A homogeneous stream of steam is a continuous stream of steam in which there are no splashes or drops of water

How to deal with creases on a mink

Is a wrinkle in the fur the death of your mink coat, or is it possible to save the day and remove the wrinkle that spoils the attractive appearance of your luxurious apparel?

There are ways, and there are many of them (video). Moreover, regardless of the reason for the appearance of creases, most often the methods of dealing with them are the same.

If your product is dirty, take it to a good professional dry cleaner, since cleaning at home with creases is unlikely to help you, and may even harm the fur.
If you see that the product is relatively clean, but there are still creases, try combing the fur with an animal brush, moving it in different directions and sort of smoothing the fur back and forth - if the crease is small, this will save the situation.
If you have a steamer, it can also help remove creases very easily. The only point is not to overdo it with the temperature and not to dry out the flesh even more. If you don't have a steamer, steam from an iron will do. Apply hot steam to the crease area. And then go over it with a brush several times.

That's probably all the advice on what to do if creases appear on a mink. However, their prevention is no less important.

How to avoid creases

Of course, when purchasing a product, especially if this model was sewn unsewn, it should be carefully inspected for defects and creases already in the store. After all, if the dissolution technology was violated or defective skins were used for sewing, then the creases will be visible immediately when purchasing the product. Therefore, if you see creases in the store, then such a product can be considered defective, and under no circumstances should you buy it. It’s easy to identify these places: play with the fur, bend it, and preferably in different places.
The main advice concerns the proper storage of mink coats. To avoid creases, mink products should be stored in a cool, or even cold, down to minus 5 degrees, room or fur refrigerator, with sufficient air humidity.
In the off-season, furs should be stored exclusively in a straightened state on hangers, in a tight, but not tight fabric anti-moth cover. Also, the product should not come into contact with other clothing, and especially with other fur.
Both during wear and during storage, the fur should sometimes be combed and ventilated, even if there are no visible damages or creases on it.
If you get wet in a mink coat in the rain or snow, then the clothes should be dried naturally and flattened in a warm room until completely dry. Under no circumstances use an iron or any heating devices to dry fur - this will result in not only creases, but also dry, brittle, falling out fur with overdried flesh.

By following these simple rules, you can maintain the attractive appearance of your mink coat for a long time. If creases do appear, then, as you can see, removing them is also not difficult. Good luck to you!

How to smooth fur with a brush

Also, at home, your fur product can be tidied up using a special fur brush.

To begin, take a colorless foam sponge, moisten it with water, and then moisten the crushed fur. But it should not be wet, but only slightly moistened.

Then comb it with a fur brush in the direction of the pile. After completing this simple procedure, the fur product must be dried.

This procedure can be carried out at least every week.

What kind of fur cannot be steamed?

You should know: not all furs can be steamed. For example, it is prohibited to steam a smooth fur coat made from a mouton, since after exposure to steam, the natural mouton (sheep fur) may return to its natural curly hair structure. You can only steam other fur inserts on mouton coats. The only gentle way to remove creases from such a product is to let it hang, periodically combing in the direction of fur growth and against it. You can purchase a special fur brush, a pet comb at a pet store, or use a regular fine-tooth comb. If a natural sheepskin coat is completely new, a small amount of fur may remain on the comb.

Important! Choose wide hangers with a large fitting area for products designed for heavy outerwear.

If after a couple of days the creases are still visible, repeat the procedures for a mouton fur coat. For other furs, proceed to steaming.

How to prevent creases and bruises on fur products

From time to time you need to take care of both the collar and the hood - take a comb with rare teeth and comb in the direction of the pile, and not against it.

Try to sit in your fur coat as little as possible. While you are sitting, folds form, and creases appear in the places of these folds. The fur in these places will cake more and more each time, and it will become more difficult to fluff it up.

Fur products cannot be packaged in a bag or case made of polyethylene or synthetic materials. They should not be stored rolled or crumpled.

It is recommended to store a fur coat in a special bag or case, hanging, on a hanger with wide hangers. In a spacious closet, so that the fur coat does not come into contact with the rest of the clothes.

Before putting your fur coat in the closet, place dried citrus peels in your pockets, preferably grapefruit. This will help repel moths.