How to stitch creases on trousers

For a business person, trousers are almost the most important element of their wardrobe. A neat appearance and impeccably ironed hands will tell even more about its owner than he can tell about himself. For this reason, it is so important to learn how to iron trousers correctly in order to feel confident, and your colleagues will have only a pleasant impression of you.

How to iron trousers: the necessary technique and algorithm of work

In order to properly iron your trousers, you will need a good iron and a properly organized ironing area. Without all this, you won’t be able to get rid of folds and bruises, or make beautiful, even arrows. Ideally, the iron is equipped with a temperature switch and a steam supply system. If you have an old Soviet iron, it’s also not a problem. In this case, always use damp gauze, folded several times. If you are the happy owner of a vertical steamer, then with its help you will be able to smooth out even the most difficult bruises right on the spot.

Using a special attachment you can make straight arrows without distortions

It is better to iron trousers on an ironing board, but it can be quite successfully replaced with a kitchen table covered with a thick blanket. Auxiliary items will also come in handy:

ironer;
tailor's pins or stationery clips (binders);
spray bottle with water;
terry towel;
sheets of cardboard or thick paper.

Trousers, like other types of clothing, are recommended to be ironed from the inside out or through an iron. This will protect the fabric from the formation of lasses, shine and scorching. Pins and clips are useful when ironing creases, as they are used to secure the instep and side seams. A spray bottle is used to additionally moisten the fabric so that folds can be ironed out better, and a terry towel makes ironing some hard-to-reach places easier. A sheet of cardboard is placed under the burlap pockets or seams so that they do not print on the outside of the trousers after ironing.

To iron trousers you will need an iron, ironing board, ironing iron and clips

Temperature conditions for ironing trousers made of different fabrics

Before you start ironing, you need to read the information on the label. The fabric composition and care recommendations should be indicated there. Depending on the material, you need to choose the optimal temperature regime.

The label shows pictograms indicating ironing parameters and product care

Knowing the composition of the fabric, it will be easier to select the correct temperature setting on the thermostat:

wool, mixed fabric - wool mode, number 2 or two dots;
polyester - silk, nylon mode, number 1 or one dot;
cotton, linen — mode cotton, linen, number 3 or three dots;
cotton + synthetic - iron like wool, but with pressure.

The wool is not ironed with pressure, but steamed, barely touching the fabric with the sole of the iron. Cotton and linen are ironed with pressure using a damp iron. Synthetic fabrics are ironed at a minimum temperature only through gauze. If it was not possible to determine the composition of the fabric, then ironing begins from the inside out at the hem of the trousers.

The type of fabric is also taken into account. If there is lint, the product should be ironed, if possible, only on the reverse side. If this is not enough, then the iron is moved in the direction of the pile, that is, from top to bottom, barely touching the surface of the fabric.

Table: recommended ironing parameters for different types of fabrics

Material	Steam quantity	Steam quality	Temperature, °C	Features of the iron
Cotton	Average	Wet	180–220	Need pressure
Linen	A lot of	Wet	215–230	Need pressure
Cotton + linen	A lot of	Wet	180–220	Need pressure
Wool	A lot of	Wet	160–170	With steaming
Polyester	Very little	Very dry	160–200	Without water
Cotton + synthetic	Average	Dry	160–170	Ironer
Wool + synthetic	Average	Little moisture	160–180	Ironer
Cotton corduroy	Average	Less humid	180–190	Hem movement

Ironing algorithm for classic trousers with arrows

Trousers are ironed in the following sequence:

Turn it inside out.
First they iron the upper part: the burlap of the pockets, underneath them.

Burlap trousers are ironed from the inside out
To ensure that the trousers fit well on the figure and do not wrinkle at the seams, press the side and crotch seams. The side seam is ironed from the waist down, the step seam is ironed from the bottom of the trousers upward.
The trousers are turned on the face.
Unfasten the zipper, open its different sides and iron the middle seam. Stroked in the buttocks area.

To iron the middle seam of the trousers, you need to open the zipper
Iron the belt first on the front half, and then on the back.

The trouser waistband is ironed from the outside
If there are folds that turn into arrows, then we also pay attention to them.
Iron side and back pockets.

Side pockets are ironed from the front side, pulling the trousers onto the ironing board
Place a folded towel inside the trousers or put it on the edge of the board.
Iron the codpiece and the front of the trousers.

The codpiece is ironed with the tip of the iron
Fold the trousers in half and begin to form the creases.
After finishing work, the trousers are allowed to cool for 15 minutes, or preferably several hours.

Where to begin?

study the composition of the fabric, this will help you avoid mistakes and ruin your trousers

What you need to know about fabric?

Depending on the composition of the fabric, you need to set the temperature and a certain ironing mode. For example, it is recommended to process synthetics only with a warm iron, jersey can only be ironed through damp gauze, and wool must be ironed from the reverse side at a temperature not exceeding 165 degrees. Lining fabric requires ironing from the inside out without using steam or dampening.

Required Tools

In order to remove creases on trousers, you need to have an iron and an ironing board on hand (the latter can be replaced with a flat, hard surface). You may also need damp gauze or a thin cloth. If the iron does not have a built-in water sprinkler, clean water and a spray bottle will be an indispensable assistant. Most modern irons are equipped with a steamer, but if your assistant does not have such a function, you will need a pan of boiling water.

What ironing modes are there?

Depending on the type of fabric, there are several ironing modes:

dry;
wet;
using steam.

Dry mode is suitable for trousers made of cotton or linen. Dry mode is not suitable for wool products. Damp or wet ironing is suitable for almost all types of fabric. The process occurs by spraying water on the item itself or using damp gauze. Some fabrics need to be steamed. There is a small nuance here. For example, wool trousers must be steamed from the reverse side, otherwise the fabric will begin to shine and shine.

Which temperature mode should you choose?

On the label, the manufacturer indicates symbols that will tell you which temperature regime is suitable for a particular product. Let's look at the most common options:

an iron with steam crossed out above it means that the use of steam when ironing is prohibited;
an iron and one dot symbolize low temperature - up to 100 degrees;
the iron and two dots indicate that the permissible ironing temperature is not higher than 150 degrees;
an iron with three points allows you to set the temperature up to 200 degrees;
A crossed out iron does not allow the use of an iron on the product.

If you are in doubt about choosing a mode, or there is no label on the product, increase the temperature gradually.

How to make creases on trousers

For an inexperienced housewife or a single man, ironing perfectly even arrows is quite difficult. If you don’t want to spend money on dry cleaning every time, you should learn all the intricacies of flawless ironing. There are two important points here: how to fold the trouser legs correctly and where, in fact, these arrows should be located.

How to fold trousers correctly and where the arrows should be

To form perfect creases without distortions, it is important to fold your trousers correctly. The product is folded in half along the middle seam. The trouser legs are aligned so that the crotch seams completely coincide with the side seams. Make sure that the lines of the side seams coincide in the upper part of the trousers (look at the edges of the belt). If the trousers are cut correctly, when the seams are aligned, the front crease will start exactly at the end of the front dart or pleat.

To correctly form the arrows, you need to fold your trousers correctly

The arrows seem to “cut” the front and back halves of the trousers into two equal parts. Depending on the type of trouser, the front part may start with a dart or a pleat. If the trousers have two folds, then the fold that is located closer to the codpiece becomes a crease. As for the back half, the arrow ends somewhere at the level of the end of the back dart or the inner edge of the pocket, but does not reach the waistband. The back half of the trousers is always ironed after the first. The arrow on it is formed quite easily, but only after you have properly ironed the front one.

Men's trousers with pintucks are an integral part of business suits

In the world of men's fashion, pintucked trousers have become an integral part of business and evening suits. Their presence in fashion collections is cyclical, but stylists insist that with the right choice and packaging, such a model should be in your own wardrobe.

About the features of the cut

So, what cut do classic men's trousers with pintucks have? Looking through fashion lookbooks, you can note that these are models with a standard waistline, under the belt of which clearly marked and fixed folds are symmetrically located. In this case, folds - “tucks”, depending on the type of model, can be located in front either singly or in pairs. Otherwise, the cut can vary significantly. The fit ranges from extremely tight to loose, including the famous chinos and banana cuts. The length in such models for the most part remains at a standard height, but the efforts of modern designers produce both overly elongated and shortened models to the level of the ankles.

Men's trousers with pintucks should be plain. This limitation of the color palette is imposed on them by their distinctive feature - pintucks - and the stylistic rule that trousers should not be a pronounced accent of the image. Otherwise, a representative of the stronger sex can rely on his preferences - black, gray, bright red or noble burgundy, green, blue, white - it all depends on the image being created and the silhouette of the man.

The changes affected not only the cut, but also the fabric from which trousers with tucks at the waist are now made for the stronger half of humanity. If previously models were mostly offered from fine wool, now you can find options made from cotton, linen, canvas, jersey, wool of any thickness or knitwear. All that remains is to choose the right model.

Rules for choosing a model based on your figure

Are trousers with pintucks suitable for all representatives of the stronger sex? Definitely not. And such a categorical answer is explained by the function that tucks carry. Initially, they were conceived with the aim of correcting the male silhouette - “removing” excess visual volume in the hips, creating the illusion of a soft, even transition from the waist to the legs. And therefore, such models are recommended to a greater extent for men with large buttocks or voluminous upper thighs.

Judging by the photos of stylists about choosing their own model of trousers, it is recommended that those with a lean silhouette be especially careful when it comes to trousers with pintucks. With a strong degree of expression of this element, especially in combination with narrow trouser legs, the figure can easily “transform” into the outline of a pear, weighing down not only the hips, but also the buttocks.

But those with excess volume in the waist area should completely abandon this model of trousers, because... It is the tucks that will visually enlarge the problem area.

And lastly, it is worth remembering that clearly defined pintucks visually elongate the silhouette, and therefore those with excessively long legs are recommended to have trouser options in which the pintucks are located in pairs on each side and soften the overall look.

How to make arrows correctly once and for all?

Unfortunately, you won’t be able to make perfect lines once and for all, but to make your trousers pleasing to the eye, you must follow some simple rules when ironing:

Before ironing, clothing must be inspected for stains. Because, at high temperatures, even a small, barely noticeable stain turns into a further problem.
First you need to prepare your trousers. From their surface, using a brush, various contaminants in the form of hairs or lint are removed.
Pockets are cleared of all unnecessary items.
Ironing should only be done on a hard surface.
The base of the iron should not have any dirt on its surface.
When ironing trousers and ironing lines, you should use an ironing iron. This is a small piece of fabric gauze or chintz. Its use helps prevent the appearance of shiny marks on the surface of the fabric.
It is necessary to prepare a container for plain water, since during ironing the piece of fabric is necessarily wetted.
The process of ironing trousers must begin from the reverse side, from its upper part.
To prevent kinks from appearing on the front side of the fabric, place a small terry towel under the pockets.
When ironing, do not press too hard on the iron.
After the pants are ironed on the back side, they are turned right side out.

Ways to create arrows

To get perfect lines on both halves of the trousers, you need to match the inner and outer seams. If the item of clothing is sewn correctly, the arrow will coincide with the groove that comes from the waistband of the trousers.

You can iron arrows in various ways. Some people prefer to iron both parts of their pants at once, while others do it in stages.

To achieve a good result, you must do the following:

The trouser leg is prepared as described above, and a cloth soaked in plain water is applied to it.
Based on the temperature requirement, which can be found on the label, the appropriate mode is set.
As the iron dries, it must be moistened with water. Unless, of course, ironing is done with an iron equipped with a steamer.
To make it much easier to iron the arrows on the fabric, you can place the iron in a certain place and wait a while, then move its base. This method will be especially convenient if the trousers are made of slippery fabrics.
After ironing one side of the trousers, be sure to check the quality of the result. The lines on the trousers should be perfectly even throughout their entire length, starting from the waistband.
Iron the other side to complete ironing.

See the video below for more details.

The ability to obtain an ideal result after ironing comes gradually. At first, many spend a fairly large amount of time on this process, but after each time it is reduced, and all of the above steps are completed with greater speed and efficiency.

Basic ironing process

Having completed the preparatory stage, you can proceed directly to smoothing:

According to all the rules, trousers are ironed from top to bottom. Initially, the pockets are processed, if there is a lining, the codpiece area, the belt, and then the length of the trouser legs itself. It is necessary to use pressing movements with an iron using steam. To prevent the appearance of kinks and contours of pockets on the front side, you can place a thin towel under them.
Next comes the main stage - ironing the front side. This is the most responsible and painstaking stage, in which incorrect behavior will affect the appearance of the ironed product. For convenience, the trousers are laid out on a board and straightened with your hands. To do this, you need to match the inner and outer seams of the trousers. They should overlap each other as accurately as possible, and the seam lines should match.
The top of the trousers contains many internal seams. This is a very difficult area for high-quality ironing on the front side. How to properly carry out the ironing procedure so that the internal seams do not appear on the face? A little trick will help: you need to put a small pad inside the trousers, and then iron them using a moistened iron.
Before shaping the creases, you need to iron the pant legs. First, the outer sides of the trouser legs are processed one by one. Then the upper trouser leg is folded back, revealing access to the inner surface of the second half of the trousers, which is thoroughly steamed. Having turned the trousers over, the same manipulation must be performed with the inner surface of the second leg.

A business man should a priori look decent

How to remove shine?

We often encounter a situation where, when ironing trousers, shiny marks remain on the fabric. And to prevent their occurrence, you must follow these simple rules:

It is advisable to iron trousers on the reverse side to avoid shiny marks.
When ironing the arrows, use an ironing iron. This is a small piece of fabric, which during ironing is regularly moistened either in plain water or in a weak solution of essence, which is made up in the following ratio: use a teaspoon of acetic acid per liter of water.

What to do if the arrows are uneven?

In the absence of much experience, it is not immediately possible to iron perfectly even creases on trousers, but do not be upset. If something doesn’t work out and the arrows turn out uneven, you just need to repeat all the above steps again, smoothing out the resulting wrinkles on the reverse side.

To avoid taking too much time to create creases each time, you need to take care to keep your trousers clean after each wear. It is necessary to clean the trousers from dust and hairs with a special brush, and be sure to place them on a hanger.

Adviсe

We often spend a lot of time getting our things in good condition, and because of this, their appearance ceases to please our eyes immediately after we put them on. To prevent this from happening with trousers, you need to know a few simple but tricky tips:

To make the lines on the trousers thinner and neater, the ironing iron should be moistened not with ordinary water, but with a diluted solution of essence. The idea is that acid can help remove shine from fabric during ironing. One tablespoon of acetic acid per liter of water will be enough.
As for the stiffness of the arrows, a small piece of laundry soap can give the longest effect in this regard. To do this, you need to run it along the fabric, from the wrong side, in the place where the lines will be located.
After the process of creating arrows is completed, trousers should not be put on immediately. The fabric remains slightly damp for some time, which is why it quickly wrinkles and changes its appearance. Therefore, the item of clothing must be left on the surface of the ironing board for some time.

The arrows on the trousers make the latter more formal and elegant. This style is worn not only by men, but also by women. Trousers are the perfect business casual outfit. However, not everyone manages to iron them correctly.

How to consolidate the result

There are little tricks on how to properly steam trousers, which are shared by professionals. They will help both women and men who take care of their image on their own to achieve maximum effect. Necessary:

A mixture of 1 liter of purified water with 1 tbsp. l. Spray vinegar onto the area to be treated using a spray bottle, moisten the iron in it or pour it into the iron reservoir.
Use a bar of laundry soap to rub the crease on the left side of the trousers.
Boil the solution of water and starch for about 3 minutes. Let cool slightly. Dip a piece of cloth into it and iron it through it. This option is only suitable for linen and cotton products.

It is easier to iron classic trousers if you do not wring them out after washing, but let the liquid drain while hanging, connecting the arrows. Just a few drops of ammonia added to water will help avoid shine on woolen items. You can get rid of shine on dark suit fabrics by wiping the problem area with a cotton pad soaked in strong tea.

Arrows on trousers can be made using a steam generator.
To do this, just pour water into a special reservoir, heat it for several minutes and run the brush over the product from top to bottom, pressing the steam button. You must first secure the fold line and carefully hang the item. Spray the trousers with a mixture of water and vinegar Rub the arrow points with laundry soap Soak the iron with a boiled mixture of water and starch We invite you to read: Cleaning the washing machine filter rules and step-by-step instructions methods and features

The history of arrows on pants

This thing dates back to the 19th century. The history of trousers is very interesting, as they were invented by accident. The pants were folded very tightly for transportation, and creases appeared on them. Fashionistas liked the arrows so much that they began to smooth them out additionally.

First of all, such trousers entered the men's wardrobe, and only then into the women's wardrobe. In the modern world, this item is basic for any classic set. On girls, trousers with arrows look very strict, while at the same time adding grace and solemnity.

How to iron

There are several ways to properly iron an item. How to make arrows on trousers:

The ironing board should be comfortable. If it is not there, use a table covered with a thick cloth.
It is important to remember that the product is ironed from the wrong side first. If necessary, use damp gauze.
Having prepared, we begin to form the arrows. To do this, take the trouser leg by the lower part and fold it so that the side seams match.
The trousers are placed on an ironing board and the fold is carefully ironed through damp gauze. Start from the front and end at the back.
The pants are given time to rest. Then they are hung in the closet on a hanger bar.

This way you can iron both men's and women's trousers with creases.

Preparation: what you need for perfect shooters

An iron and a flat surface are the main thing in the work

How to prepare to create the perfect wings on clothes? First of all, we will need:

iron – it’s good if it comes with a steamer;
ironing board or any other hard surface;
ironing or cotton fabric ;
water in a spray bottle;
pins.

To properly iron the creases, the trousers need to be prepared. I give you some advice:

Clothes must be clean . High temperatures will only make dirty stains and stains worse. Such contaminants will penetrate even further into the fibers of the fabric.
Set the correct iron temperature . It depends on the type of fabric. Remember that cotton and wool items can be processed at high temperatures, but synthetic pants can only be processed at low temperatures. The optimal temperature regime is indicated on the label that is sewn to the clothing.

Look for the label on the back of the garment.

White gauze or cloth . Only this color will not leave streaks on the fabric and will not stain the trousers.
Iron your pants inside out . This technique will not leave shiny lines from a hot iron.
Water. If the iron does not have a steam function, then prepare a bottle of water with a spray bottle. When ironing your trousers, you will need to wet the fabric.
Clean iron surface . If there is dirt on the working panel, the device should first be cleaned.

You can clean the soleplate of your iron using a pencil.

Smooth surface . Ironing should only be done on a perfectly flat and hard surface. The ironing board has these properties. If it is not there, then you can iron it, for example, on a table covered with a thick blanket.

Secrets of easy ironing

Every housewife has her own secrets on how to make the creases on your trousers perfectly straight. If you follow a few important rules, your item will always look perfect.

How to iron trousers with arrows:

Be sure to iron the product through damp gauze or thin cloth. This makes it possible not to damage the material and not leave marks from the iron.
All elements are carefully ironed. Pockets, belt loops, clasps and belts require a special approach.
It is important to ensure that the side seams of each pant leg match. This makes it possible to make the arrows on the trousers even.

In addition to the secrets of ironing, there are also folk methods that will help keep things in perfect shape for a long time.

How to smooth out wrinkles correctly

The style of men's trousers differs significantly from women's. In the latter case, the use of darts is provided. They visually slim, emphasizing all the curves of the female figure. In addition, for the convenience of women they make: straight, narrow and cropped trousers.

If you need to quickly solve the problem of how to iron trousers with creases, all the features of the item of clothing are taken into account. Preparing items for ironing is identical for all male models.

Women's styles

Iron the product from the inside. At the same time, do not ignore such complex elements as darts, pockets, and belts. The next instruction is:

Turn the pants right side out and flatten them onto a flat surface.
Women's tapered trousers are laid so that not only the fold line is connected, but also the darts.
To ensure that the item lies flat, attach it with pins.
Place damp gauze over the cloth.
Start ironing.
Once you have finished ironing the first leg, carefully move it to the side and iron the second leg.

How to iron men's models correctly

Initially, it is better to iron all difficult areas - pockets, zipper areas and waistbands. It's better to do this from the inside out. The execution scheme is the same as for female models. The difference is that men's ones do not have darts. If a male novice gets down to business, it is better to look at a photo or video of the process before starting.

Traditional ironing methods

Young housewives often wonder how to properly iron trousers with creases. To ensure that an item is perfectly ironed, there are proven methods. So, how to iron trousers with creases using folk methods?

The trousers are ironed from the inside out very carefully. Then the product is turned inside out and folded so that the side seams match. The gauze is dipped in a solution of 1 liter of soapy water and 1 tablespoon of vinegar and wrung out. While it is wet, iron the arrows with a hot iron.
The second method will require you to prepare soap, water and a comb. The trousers, turned inside out, are laid out on an ironing board, and a line of arrows is drawn with a piece of soap. After this, turn it right side out. The comb is dipped into water, a line of arrows is inserted between the teeth and drawn with light pressure along the entire length.
The easiest way is to use wet soap. A piece is passed over the place where the arrows will be. After this, you need to iron it from the front side through a wet cloth.

Using each method will make creating creases on your trousers much easier and will preserve them for a long time.

Arrow location determination

There are cases when the arrows on the back and front of the trousers are incorrectly positioned or an error was made when ironing. In this case, you will need to steam the product on the left side, completely straightening the legs. Only after this procedure is it necessary to outline a new area for processing.

How to properly straighten creases on trousers is a question that worries many people. On a product with a high-quality cut, sewn by a good craftsman, it is enough to match the seams of the right and left trouser legs. The folds will be in the right place for them. There are location features that you should be guided by:

the fold is located in the middle at the bottom of the panel, front and back, as well as in the knee area;
you need to make sure that the arrows strive to divide both parts into equal halves;
in front, the arrows begin on the fold near the belt; if there are two of them, then you should focus on the one closest to the codpiece;
The fold at the back is at the end of the dart or the inner edge of the pocket.

If at least one condition is violated, it is necessary to properly iron the straight creases on the trousers, first securing the set result with binders, pins, or simply basting. Only then iron it. Everything described applies to female and male models.

What to wear with dress pants

When buying trousers with arrows, the question arises of what to combine them with to create a stylish and practical look. Stylists recommend first of all using the “white top, black bottom” rule. So, pair white blouses or shirts with dark trousers.

If the dress code is not strict, you can choose brighter colors. For example, pink, blue or green shirts look stylish with black trousers with arrows. The classic style will make a man or woman's figure slimmer and more graceful.

Shoes are selected in black leather. For men - classic shoes. It is important to remember that socks should not be visible from under your pants.

For women - black shoes with heels or stilettos. They will make your legs even slimmer. A jacket to match your trousers will help complement your business look. It is worn to meetings and conferences.

Stylists recommend deciding what to wear with pleated trousers before purchasing them. They are a wardrobe staple and can help create a business or office outfit.

Black is a staple in any wardrobe. The trousers go well with a white, blue or yellow top. This contrast emphasizes the rich shade of a dark item and adds completeness to the image.

For men, the best option is a white shirt and tie. An accessory can be a leather belt. For footwear, choose black classic shoes.

For women, there are several options for trousers:

Classic white blouse. It is tucked into trousers, thereby visually lengthening the figure and legs.
Cropped models with arrows go well with denim or cotton shirts. A leather jacket will help complement this set.
A jacket will complete your business look. It should be matched to the trousers. A fitted jacket is selected for straight models, and a classic wrap jacket for loose ones.

Don't forget about accessories. For trousers, choose a neat belt without large plaques. Girls can complement the set with a neck scarf in bright colors. Men can use cufflinks and ties.

Shoes and accessories for trousers

Classic shoes look good with straight styles. For women, shortened models can be paired with moccasins. Pair with skinny trousers with wide-heeled ankle boots.

The color of the shoes is matched to the clothes. The best option is black. For everyday wear - gray, red, brown, beige.

Girls can choose fashionable and modern accessories to complement their business attire sets:

Belts of bright colors and shades, complemented with rhinestones, beads or beads.
Neck scarves.
Handbags are an integral element of a woman's wardrobe. These can be either small clutches or large office briefcases.
Beads, gold chains, thin bracelets, neat rings.

Classic black trousers with arrows take pride of place in the wardrobe of every business person. This item will require careful care and proper ironing. Using the advice of experienced housewives, you can make high-quality arrows.