Possible problems
Gas equipment repair specialists say that the owners of gas appliances from Elenberg and Druzhkovka most often deal with breakdowns of the electric igniter.
Symptoms of a problem
In some cases, the gas burner may not turn on or go out. The cause is often worn or clogged parts. Also, the burner may go out during cooking or immediately after releasing the adjustment knob, which is due to a malfunction of the gas control function. Sometimes the fire may go out after the oven has warmed up. In this case, you need to contact a specialist to diagnose the thermocouple and solenoid valve.
Gas control in a gas oven
Causes of malfunction
If there is a problem with turning on the oven, the reasons may include the following breakdowns.
- Failure of the flame control sensor (thermocouple). In this case, the solenoid valve does not receive enough voltage, and it cuts off the gas supply to the oven.
- Failure of the electromagnet. In this case, the sensor is working, it provides voltage, but the valve is not held open.
- The nozzle in the burner is clogged. To fix it, you need to remove the burner and clean the nozzle.
- The burner is clogged. In this case, the fire does not reach the flame control sensor (thermocouple), which leads to its extinguishing. To eliminate the malfunction, you need to remove the bottom of the burner and make sure that there is no fire at the location of the thermocouple, and then clean the part.
- Broken gas valve. This may damage part of the internal turning mechanism or one of the links in the gear. In any case, the part must be replaced.
- The oven works, heats up and goes out. A possible reason is an unregulated minimum flame, which the oven switches to after maximum heating. If this mode is not adjusted, the thermocouple does not warm up, which means the oven turns off.
- Timer fault. The contacts in it may become sour (inside or outside), which is why the oven does not work or periodically turns off. In this case, the serviceability of the thermocouple and the outstanding voltage are first checked, and then the timer and other parts from the circuit with the flame control sensor are checked.
Read also: Expectorants for chronic bronchitis
Conclusions and useful video on the topic
What the pilot hole in a gas oven looks like and where it is located is described in the video below. Additionally, the video shows how to remove the protective plate and gain access to the burner.
As with any gas equipment, working with the oven must be extremely careful. Pay attention to any alarming dysfunctions of the device and contact specialists in time to avoid emergency situations.
And lighting a flame in a gas oven is quite simple: you only need to learn how to do it correctly once, after which the hostess will not need any outside help.
Would you like to supplement the information presented with useful recommendations or comments? Or do you still have questions that we did not cover in this material? Ask them to our experts and other site visitors - the feedback form is located below.
A gas stove, like other household appliances, requires handling in accordance with basic safety rules. If you are planning to buy a new stove or have never turned on the one you already have, then these instructions are for you. How to turn on a gas stove?
- You need to find a valve on the gas pipe that should be opened. This way you will ensure the supply of gas to the gas stove.
- Look at the symbols next to the burners. They will show you the matching of the relays and burners. To begin, select the burner you want to turn on. If the stove does not have electric ignition, then bring a lit match to the divider and turn the desired relay slightly counterclockwise. Once the burner is lit, adjust the flame to the desired size. Be sure to make sure the fire is blue, otherwise turn off the burner to clean.
- If the stove has an electric ignition function, it will turn on a little differently. The semi-automatic system works as follows: you press a button, which releases current to the burner, resulting in a spark being supplied to all burners. Now all you have to do is turn the desired relay. If the stove has an automatic electric ignition function, then you first need to press the relay a little and then turn it counterclockwise.
- If you need to turn on the oven, find the hole (one or two) at the bottom leading to the burner. Then turn the relay counterclockwise and bring the match to the hole. After this, the fire should spread across the entire surface of the oven. If everything happened according to plan, then you can calmly close the door and wait for the oven to heat up to the required temperature. If your stove is equipped with an electric ignition function, then you should turn on the oven in the same way as the burners.
- Lighting a gas stove, as you can see, is not very difficult. You just need to follow the instructions above or find the answer you are interested in in the instructions for using the gas stove. If none of the above tips help you, we recommend calling a specialist who will check the system and explain everything to you.
» alt=»»{amp}gt;
Gas equipment is a convenient and economical attribute of a modern home. But it is also an object of increased danger, which requires increased attention and compliance with operating standards.
Those who have gas water heaters should first of all know how to turn on a gas water heater and what rules must be followed when using it.
Step by step instructions
These recommendations are standard and can easily be applied to ovens from the brands Darina, Hephaestus, Greta, Brest, Indesit and others.
- First you need to make sure that the gas device is connected correctly to the electricity and gas networks.
- Then, we study the connection diagrams for each burner and switches.
- If the oven is not equipped with electric ignition, you will have to light the fire in the oven or on the burners manually using matches or a lighter.
- If you look at the oven Hephaestus, Indesit, Darina, Greta. You can find a hole at the bottom. There may be one or several of them. The ignition occurs through them.
- To light a fire, you need to turn the switch knob on the control panel and at the same time bring a lit match to the hole at the bottom of the oven.
- For models with electric ignition, set the required temperature on the control panel and turn the gas supply switch. Simultaneously with these actions, the ignition button is pressed.
Gas stove INDESIT I5GG0C
How to light an oven and stove with gas control function
There are often problems in our lives that we are forced to deal with due to circumstances. Unfortunately, even in such a traditionally female form of housework as cooking, a man’s hand is often required to fix, sharpen, tighten, and the like.
Sometimes ladies have problems with the gas control function, which prevents them from lighting the oven. And you need to cook urgently. And there was no one nearby who could help overcome the rebellious oven. In order to understand what needs to be done, you must first understand what it is and why it is needed.
And only then decide what to do.
What is gas control?
Gas control is a basic safety system that is built into a gas stove or oven (it is unnecessary in an electric one)
It is based on the fact that the moment the fire stops burning, no matter in the oven or on the burners, the gas supply stops. This greatly helps prevent gas poisoning, which was not uncommon in the past.
It is not very practical for burners, but many agree that safety is much more important than minor household inconveniences.
Structural features
As you may have noticed, this is a rather complex system, which, just like any other system, can malfunction or break down.
In most cases, in such situations, it is recommended to call a specialist to your home who will inspect the oven and repair it if necessary, because the problems can be quite serious.
One of the main problems of gas control is the thermocouple. It is on this that the entire system of this control is based. It is located close to each burner and therefore can often become dirty. Because of this, it stops working normally and gas stops flowing, or flows malfunctioning. This problem can be solved by cleaning the thermocouple with a knife or sandpaper.
But if the problem does not go away after reading, then you definitely need to contact a specialist. No other way.
How to choose a convenient model with gas control
If you have firmly decided to purchase an oven with a gas control system, then pay your attention to a couple of nuances
Read information about the characteristics of the oven, read about the manufacturer, about the cost - in general, read a lot and compare. Be sure to read the reviews for this model, pay special attention to mentions of gas control. By reading reviews, you will definitely receive the information that the manufacturer will not give you, namely about convenience, disadvantages, features
Sometimes a very expensive model is not worth the money at all - this information will be useful to you. Balance your needs and capabilities.
Safety precautions
If the smell of gas is detected, the use of fire and electrical appliances is strictly prohibited until the room is completely ventilated and the leak is eliminated. The oven burner has a large area, so when blue fuel is supplied, it quickly fills with a large amount of gas-air mixture. If the burner does not ignite within 3 seconds, you must turn off the gas and ventilate the oven.
When lighting the oven, it is important to ensure that the burner ignites completely. If one of the parts does not burn, you must also turn off the gas supply, ventilate the oven and re-ignite
Ways to turn on the oven
The oven is turned on manually and automatically.
Manual involves the use of matches, lighters, and commercial electric ignition.
The hole is visible above, on, or underneath the metal plate of the oven. In the latter case, the metal panel is removed or moved and the fire is brought to the hole.
If the ignition is automatic, then turn the gas handle to the desired temperature and press the electric ignition button. In its absence, press and hold the throttle.
Attention ! Repeat the ignition procedure with the door open: accumulated gas may cause an explosion.
How to properly light the oven in a modern gas stove
Turn and press the gas supply handle into the oven.
If electric ignition is provided, then after selecting the mode, press the button and hold.
Manufacturers equip new models with an electronic display with a timer and recessed switches. Two buttons (“+” and “-”) allow you to select functions.
Find out which oven cleaning is best: catalytic, hydrolysis or pyrolytic
The plates have nuances of use described in the operating instructions for each model.
Why does the fire go out immediately after being ignited?
The fire goes out if the electric ignition button is not pressed for 15 seconds.
For safety reasons, some models require holding the gas handle for 3 seconds after ignition. The gas simply did not have time to reach the outlet through the pipe.
Other possible reasons:
- insufficient gas pressure,
- malfunction of the thermostat or gas control knob,
- burner nozzle is clogged.
