How to use a can opener?


Condensed milk is a popular, tasty and healthy product. It is used as an ingredient to create various sweets, or as a separate dessert. It is produced in various convenient containers (bags, tubes, jars), but condensed milk in jars is considered the most delicious. The can is usually opened with a can opener, or using a special can opener.

How to open condensed milk with a can opener? There is nothing difficult about opening a tin can. To do this, you need to do some simple steps.

Classic version

  • put the condensed milk on the table, press the sharp end of the opener to the top of the can and hit its handle with your hand, a hole will appear
  • insert the point into the resulting hole
  • hold the can with one hand and the handle of the opener with the other
  • move slowly up and down in a circle
  • pick up the lid with the tip of the opener and gently pull up.

You can use a simpler method and use the edge of a canned knife to make a hole in the lid, then you can simply drink the liquid or pour it directly from the hole. Just be sure to make a second hole in parallel to maintain pressure in the jar.

But it may happen that when you went to nature or to the country, you forgot to take the bottle opener with you. How to open condensed milk if the necessary device is not at hand? You can use other simple methods to open a tin container.

With a knife

The most popular way to open a can of condensed milk without an opener is using a regular knife. Many men always carry a penknife with them, which can help out in such a situation. With a little physical strength and a couple of simple steps, you can easily open the required tin container.

  • To prevent the can from jumping to the side and injuring you, you need to tightly clasp it with your hand
  • holding the handle of the knife with your hand, place its tip against the edge of the can itself so that it is vertical to its surface
  • press hard on the handle of the knife, after which part of the blade will end up in the jar itself
  • move the knife blade slowly up and down along the diameter of the tin, while cutting its surface
  • use the tip of a knife to pick up the cut edge of the container and boldly lift the lid up

Rating TOP 7 best can openers

Today there are a large number of different can openers. Among all this diversity, we have identified the most popular ones and added them to our rating:

  • JOSEPH JOSEPH CAN-DO.
  • NADOBA SIRENA.
  • TEFAL INGENIO.
  • Tescoma Presto.
  • Fackelmann Lichfield.
  • 6 in 1 Kitchen CanDo.
  • Regent Inox.

We suggest moving on to a detailed description of each knife mentioned.

JOSEPH JOSEPH CAN-DO

The rating opens with a knife with miniature dimensions, allowing you to store it anywhere. To open any jar, you no longer need to make a lot of effort, since the knife will do everything itself. You just need to fix it on the lid and twist the mechanism.

Package weight100 g
Colorgrey
Manufacturer countryChina
  • simple and understandable use for any user;
  • blades are made from stainless steel;
  • Does not take up much space in the kitchen, thanks to its round shape.
  • No.

Price: from 300 to 450 rubles.

can opener JOSEPH JOSEPH CAN-DO

A wonderful opener. In the store I noticed it because of its extremely unusual shape. It is a kind of circle with special holes. It does not require much effort to open a can of canned food. What’s most pleasing about it is its small dimensions, which means it can be placed in kitchen drawers. However, miniature sizes bring minor inconveniences. For example, I have already lost her a couple of times in my own home. I recommend purchasing it due to its small size and high operational efficiency.

NADOBA SIRENA

The new generation can opener is made from high-quality zinc alloy with some stainless steel elements. Overlays made of special plastic help prevent slipping in the hands during operation. It turns out to be reliable and easy to use, making it an indispensable assistant in any kitchen.

Manufacturer countryCzech
Colorchromium
Size25x11x5 cm
  • knife length is 18.5 cm;
  • made of high quality alloy and steel;
  • The handle has a special anti-slip coating.
  • not found.

Price: from 500 to 700 rubles.

can opener NADOBA SIRENA

I bought a new can opener quite recently because I often work with canned goods and jars. At the dacha, such a device is simply irreplaceable. It is impossible to live a day without it. What I liked most were the comfortable handles, which fit securely in the palm of your hand and do not slip while opening the lid. I consider it necessary to note the fact that the unit does not break the lid and does not damage the tin itself. This feature allows me to collect canned goods as I use them for outdoor yard decor. I highly recommend purchasing this knife!

TEFAL INGENIO

It is considered a prominent representative of the line of kitchen appliances from a well-known manufacturer. The main part of the tool is made of stainless steel. The two handles have heat-resistant plastic coated in several layers. There is an opener on the metal element.

Guarantee2 years
Weight240 g
ColorRed Black
  • additional possibility thanks to the bottle opener;
  • easily clings to the can;
  • does not leave sharp ends;
  • Fits comfortably in the hand due to the plastic coating, which is resistant to high temperatures.
  • not detected.

Price: from 300 to 400 rubles.

TEFAL INGENIO can opener

I have long wanted to replace my old can opener with a good can opener. It took me a long time to choose the right model, since there are a lot of them in the store. In the end, I settled on this design and use it almost every day. It does a great job of opening cans. I collect some cans, so it was important for me that the knife would not spoil it, but only catch the top part. Rubber handles deserve a lot of attention, thanks to which you don’t have to worry about falling while working.

Tescoma Presto

The presented knife is made of high-quality and reliable stainless steel, thanks to which it will serve its user for a long time. The main purpose is to quickly and accurately remove the lids from the cans. It is worth noting that the knife copes well with opening bottles with crown caps.

Weight100 g
Colorsteel
Size22x9x4 cm
  • made of high quality stainless steel;
  • there is a special loop that allows you to hang a knife on the wall;
  • Attractive design in white color.
  • White pens get dirty quickly.

Price: from 200 to 250 rubles.

Tescoma Presto can opener

Finally, everyone in our house decided to change the opener. Due to the onset of the summer season, there is an urgent need for good and reliable openers that would allow you to quickly open a jar without much damage. All the requirements of our family were satisfied by this type of can opener. It copes well with its main purpose and does not take up much space in a drawer or bag. It is always convenient to take it with you to the dacha and back. It doesn't leave any sharp chips, which makes it easy for me to trust my kids with it.

Fackelmann Lichfield

A can opener is very similar in appearance to a regular opener, only it has a larger rubber handle and a more durable construction. It copes well with opening lids of any diameter and does not leave sharp chips on them.

Length17 cm
Materialsteel
Pennon-slip
  • The material is based on high-quality metal and plastic;
  • the handle does not slip, thanks to a special plastic coating;
  • There is a special loop that allows you to hang the tool on a hook.
  • not detected.

Price: from 90 to 150 rubles.

Fackelmann Lichfield can opener

All the time I used an old bottle opener that I got from my grandmother. I really liked the ease of use and high-quality opening of jars without damaging the lids, which can be reused. I took it on a hike and it broke because of the tin. I wanted to find exactly the same one in the store, but I couldn’t. There were only modern analogues, but this model is very similar in appearance to the previous one. For this reason I bought it too. The knife is wonderful and quickly cuts even the oldest lids. Opening twists and cans is no longer a problem for me.

6 in 1 Kitchen CanDo

With the presented model you can easily open various types of cans. The knife carefully removes the lids, eliminating the possibility of a sharp edge. Does not require much storage space and is very convenient for everyday use.

ManufacturerChina
Materialstainless steel, plastic
Size19x5 cm
  • convenient use;
  • does not damage the lids when opening;
  • fits any jar size;
  • leaves no sharp edges.
  • not found.

Price: from 100 to 250 rubles.

6 in 1 can opener Kitchen CanDo

I liked this wonderful device in an online store. I have long wanted to replace my old and clumsy opener with a brand new can opener. Delivery was fast and within a few days after placing the order I could start using it. The main advantage here is the neat cut of the leg. There are no sharp edges left on the lid that could harm your health. Thanks to this quality, the knife can be used by children. It holds firmly in the hand and does not slip during prolonged work. This thing is necessary for twisting cans.

Regent Inox

With this knife, the user can easily open any tins and cans. The main material of construction is high quality zinc alloy with a special chrome coating. The blade is made of alloy steel.

Manufacturer countryChina
Weight240 g
Size11x21x5 cm
Colorblack, silver
  • Durable zinc alloy construction;
  • the blade is made of high quality steel;
  • comfortable handles with plastic elements.
  • not found.

Price: from 200 to 300 rubles.

Regent Inox can opener

We purchased this knife based on recommendations from friends. My sister and I often bring a lot of jars of twists and canned goods from our parents’ house. It is very difficult to open them manually or with a regular opener, so we chipped in and bought this mechanical one. It fully satisfies all our conditions and makes it easy to open jars. It doesn't require much maintenance and doesn't take up much space in the kitchen cabinet. Special rubber tips at the ends of both handles make it comfortable to hold in your hands.

Using your hands

There is a situation when you don’t even have improvised tools at hand, how to open condensed milk without a bottle opener? If a person is physically strong, then this will not be difficult.

  • Hold the jar horizontally with the palms of both hands and make a dent in the middle on the sides with your fingers, repeat this movement several times in a circle
  • Grab both bottoms of the jar with your hands and make counter movements, squeezing the container until the bends crack, then it can be opened in half.

With the help of a stone

What to do if you find yourself far from civilization and there is no knife, and no strong male hand either? Then be smart and try to open the condensed milk using stone or concrete. The technical process of production sealing of cans at the enterprise consists of bending the edges of the lid using a powerful press around the cylinder of its base. If you try to remove the top layer of metal that protrudes, then the tin container will open with ease. To do this, you need to perform a simple operation.

  • place the bottom of the jar on your palm
  • Press the jar with the lid down onto the stone or concrete and make movements in a circle
  • After a couple of minutes, the edges of the side will be erased; lightly press on the sides of the lid and it will open easily.

Using a tablespoon

If you don’t have an opener at home, but you urgently need to open a can of condensed milk, what should you do? You can, of course, go to your neighbors, or you can use a simple method to open a tin container using a regular spoon. The process itself is a bit complicated and will take a lot of time.

  • put condensed milk on the table, grab it tightly with one hand, and take a spoon with the other
  • in the place where the jar is in close contact with the side of the lid, rub diligently with the edge of a spoon along the entire perimeter
  • Press firmly with the fingers of both hands on the hole formed and, poking it with a spoon, remove the lid.

Such simple methods as opening condensed milk without improvised devices will help solve the problem in the most force majeure situations. The most important thing is to open these options very carefully, as you can get hurt by the tin and make sure that no dust or dirt gets into the liquid. Of course, the best thing to do when going on a picnic is to take with you the necessary kitchen items so that you don’t have to resort to similar methods.

Safety precautions when opening a can without an opener

All actions associated with opening a tin container without a special device carry the risk of getting a cut or abrasion. Therefore, when using available means, you should follow safety precautions so as not to cause harm to health.

Do not open a tin can with a knife while placing it on your knees or holding it between them.

To protect your hands from cuts, you can protect them by wearing thick gloves or wrapping them with cloth.

If you still cannot avoid a cut, you need to wash the wound with running water, treat it with an antiseptic, apply a gauze bandage or stick on a bactericidal patch.

Thus, using some techniques and devices, you can open cans even if a special knife is not available. However, when going on a hike or picnic, you should take a can key with you. This device will not take up much space and will help avoid injuries and waste of extra time.

Video

The very first canned foods were made in the eighteenth century for army food. The container for them was large, heavy, and for a long time various tools were used to open it - a hammer, chisel, bayonet, chisel, and sometimes guns.

The first can openers were invented only in the nineteenth century. They were difficult, inconvenient and very rare. Since then, their design has undergone various changes. By the mid-twentieth century, the can opener had acquired its final form and retained its shape.

Types of can openers

Modern openers are one of the most necessary working tools in any kitchen. Working with them does not require special knowledge and skills. The main thing is to ensure that the can opener remains sharp at all times. It will be difficult to cut through the metal layer and open canned food with a blunt instrument.

Modern models differ from simple can openers in a more complex mechanism, shape, and blade length. Devices designed for easy and quick opening of cans are equipped with various additions: wheels, magnets, motors and handles. These models meet the most modern hygienic requirements. Thanks to the modern design, the metal of the opener does not come into contact with the contents of the can. When opening, you can be sure that metal particles or microorganisms will not get on the food. To work with can openers effectively, you need to know the features of various models and choose the right one.

Best lists

After the rich variety of models described above, we decided to organize a list of the best in the following categories:

  • Best price.
  • Electric.
  • Mechanical.

Let us focus on each item indicated and its main technical parameters.

Best price

Webber (0R-00003152) Delta is used primarily for opening screw caps. The knife will be an excellent assistant in the kitchen, because it not only opens pickles, but also knows how to close them tightly. Thanks to its special type of design, the model is able to work with lids of various diameters.

Colorgreen, gray
Materialplastic
Country of OriginChina
Materialplastic
Weight250 g

Cost: from 50 to 90 rubles.

can opener Webber (0R-00003152) Delta

Electric

Endever Smart-25 is made in an unusual black design. Near the lever there is a special magnet that prevents the cover from falling and does not allow it to move during operation. The manufacturer equipped his creation with two unique, in his opinion, functions - sharpening knives and quickly opening bottles.

Guarantee period1 year
A countryChina
Power consumption70 W
Materialsteel
Length of cable0.7 m
Frameplastic

Cost: from 800 to 1000 rubles.

can opener Endever Smart-25 and

Mechanical

Regent inox Linea CUCINA 93-CN-04-02 is made of high quality stainless steel. Able to open any canned food, thanks to which it will take pride of place in your home. The wear-resistant material promotes long-term service as it almost never oxidizes.

Materialzinc alloy
Weight0.29 kg
Dimensions0.2x0.6x16 cm
Country of OriginChina
Colorblack

Cost: from 400 to 750 rubles.

can opener Regent inox Linea CUCINA 93-CN-04-02

Mechanical keys

More complex mechanical designs are often used in catering establishments. A professional can opener is fixed to the edge of the table using screws or special clamps.

Homemade machines consist of two levers and a thumb, which, when turned, cuts off the lid of the can.

Advantages of a mechanical opener:

  • High quality sharp blades, sharpened on both sides, made of hardened carbon steel.
  • Rust-resistant mechanism.
  • Plastic bushing that facilitates movement and reduces physical effort.
  • Simplicity of design, allowing you to independently disassemble and reassemble the mechanism if necessary.
  • Dishwasher safe.

About the Kredmash key

Numerous reviews posted on the Internet highlight several advantages of the Kredmash canning accessory.

Read also: Veranda for a wooden house photo projects

Among them the most frequently mentioned are:

  • speed and quality of the conservation process;
  • ease of use of the key;
  • the accessory is very comfortable to hold in a woman’s hand;
  • The device weighs a little, which makes the screwing process easier;
  • there are no unnecessary unnecessary details that confuse new housewives;
  • the product is made of carbon steel with a protective coating;
  • the handles are covered with durable plastic, black in color - this material protects the skin of the hands from the appearance of calluses;
  • the plastic covering the handles does not rotate or wobble;
  • 8 turns are enough for a hermetically sealed seam;
  • the key is very easily removed from the neck;
  • The seams are smooth, no waves or other errors are formed;
  • Time-tested machines are distinguished by the absence of rust and other factors that destroy metal.

Automatic openers

An automatic can opener is a very convenient model that is simple and easy to use. Automatic can openers have advantages:

  • Convenience - when opening a can, you do not need to make any physical effort.
  • Small size - the device can fit in a regular kitchen drawer.
  • Safety - the device leaves the edges of the container smooth, and when opening it is impossible to cut yourself or get injured.
  • Hygiene - the device has a small holding magnet that removes the open lid, preventing it from slipping and preventing it from falling into the contents of the jar.
  • Independence from the presence of an electrical network.
  • Duration of use even with constant use.

Electric cars

Capable of opening any number of cans as quickly as possible. The electric opener consists of:

  • A holder that securely fixes the can, preventing accidental falling, slipping and injury.
  • The motor that starts the mechanism.
  • A knife mechanism that quickly and without the use of physical effort opens the lid.

Portable and stationary electric models are widely available. Portable ones operate with batteries; you can take them with you on hiking trips, fishing, or to the country house. Desktop accessories operate on mains power only.

Multifunctional types of openers with various additional accessories, wall-mounted and table-top, are also produced.

Features and purpose

In the first half of the 20th century, the manual can opener was improved, and the useful invention became extremely easy to use. Since then, little has changed: despite the presence of several modern varieties of this instrument, the design still involves the presence of a handle and an iron plate, often made in the shape of a horn. Sometimes there are two such plates - for convenient opening of cans of any size, as well as bottles, homemade sealers. The design of the knife may also include the presence of gears. This opener is universal, it is also suitable for any diameter of cans, and does not form torn nicks on the rim.

Modern can openers are indispensable assistants for every housewife, designed for everyday household needs. This type of tool is significantly different from its conventional kitchen counterpart. First of all, the shape and size of the blade. Specialized, more complex knives, which are designed for easy and quick opening of containers, have a number of additional parts: handles, wheels, motors, magnets. A characteristic feature of modern products is a special operating mechanism that ensures there is no contact with the contents of the jar. You can be sure that microscopic metal particles will not get into your food.

Some models of can openers provide the ability to customize the tool for a specific user, based on whether he is right-handed or left-handed.

Depending on priorities and capabilities, each housewife will be able to choose a suitable device for opening cans. Modern industry provides a wide choice. All types of products can be divided into 4 groups. Each of them has its own distinctive features, and how to use the can opener will directly depend on them.

Manual

Manual canning knives are durable. This is a classic of the genre and the simplest representative of such products. There are the most primitive designs with a wooden handle, which were familiar to our ancestors. The product looks quite simple: an opening device is attached to a loop-shaped stop. On one side there is a blade for uncorking canned food, on the other there is a small hook for removing metal lids from glass jars. The internal part is fixed in a handle made of wood, rubber, sometimes plastic or metal.

Read also: How long does carp live in a pond?

There is a second design - with a wheel, it is safer and at first glance no less simple. However, this is not quite true. The operating principle is based on the rotation of the cutting tooth, which is ensured by pressing special levers.

Mechanical

Mechanical knives are more complex. Such devices are used by the catering industry. The principle of operation is that it pierces the surface from above, is attached to the side, and then, using a valve turned by the user, gradually opens the lid. A professional knife with a load of 30 or more cans per day is usually made of high quality steel and is rigidly fixed to the table using a clamp or through screws. It is capable of uncorking any type of canning containers at a speed of 5 pieces per minute.

Distinctive features of a mechanical knife:

  • durable melanite shaft that does not corrode;
  • high-carbon hardened steel blades, sharpened on both sides;
  • plastic bushing, thanks to which physical effort is reduced when turning;
  • convenient and quick disassembly, without the use of additional tools;
  • Dishwasher safe.

This option is one of the most universal; every lover of home canning should definitely have such a device.

Automatic

This knife model is fast and easy to use. Runs on simple batteries. Simply attach the device to the lid and start the mechanism. Compared to its manual and mechanical counterparts, the knife has many advantages:

  • ease of use - there is no need to make an effort to open the jar;
  • safety – the edges remain smooth, eliminating the possibility of cuts;
  • compactness - does not take up much space;
  • the presence of a special magnet that prevents the opener from slipping and helps you easily remove the lid without getting your hands dirty;
  • durability - even with regular use it can last for a long period of time.

Before using an automatic can opener, you must read the instructions. You need to be careful with the can opener if children are around. Do not open cans with high pressure (such as an aerosol can). It is also not recommended to open containers containing flammable liquids. When replacing the battery, you need to wait until the motor stops completely. Before cleaning the device, the batteries must be removed to eliminate the risk of spontaneous activation.

Electrical

The first device of this type was developed on the basis of a manual analogue with a cutting wheel. An electric can opener allows you to uncork containers as quickly as possible. Inside there is an electric motor, a knife mechanism, and a can lock. There are some differences in design, but the operating principle is the same:

  • a special holder secures the jar;
  • the user triggers a mechanism that uncorks the container;
  • After opening the can, it is necessary to remove it from the latch.

Modern industry offers portable and tabletop electrical appliances. The first type runs on batteries. It is appropriate to take it with you to the country, out of town, or on a hiking trip. The desktop model connects to the network. Specialized varieties are also produced (they are used to open tin cans or use them as a corkscrew for wine bottles) and multifunctional electric openers.

Before starting work, you should properly secure the cutting roller so as not to injure your hands with the sharp part.

Varieties of canned fish openers are not much different from conventional general-purpose designs. The table contains all the main pros and cons of different knife designs. Based on them, potential buyers can make their choice.

Type of knifeprosMinuses
ManualConvenient sizesPotential for injury remains
Light weightPre-training required
Opens all types of cansNeed physical strength
InexpensiveOpens unevenly, leaving sharp edges
MechanicalCompact and lightweightTraining needed
Easier to use than manual onesAfter opening the can, jagged edges remain
Minimum risk of injuryRequires physical force
Inexpensive
AutomaticPractical, compact, lightweightBatteries need to be changed periodically
Does not require physical strengthMore expensive than previous types of can openers
A special magnet attracts the lid
The knives open the can from the inside and cut smoothly, which eliminates the possibility of injury
Stops automatically
Batteries allow you to work when the lights go out in the house
ElectricalSimple and convenientLarge weight and size
Injuries excludedThey work from the mains: if the lights go out in the house, you can’t open the jar
No need to apply physical forceExpensive
The jar is securely fixed

What to look for when choosing a bottle opener

When purchasing you need to consider:

  • The material from which the can opener is made.
  • Simplicity of design and ease of use.
  • Compactness and weight.

To choose the most correct and successful model of a can opener, you need to determine what types of cans or bottles the device will open. And also how often it will be used.

If you need a small and universal model that can be used to open iron cans, cans or bottles and used occasionally, then a manual opener would be the best choice. When choosing, you need to pay attention to quality. A good material for manufacturing would be stainless steel. The handle should be made of wood, plastic or rubber and firmly fixed. There should be no defects or roughness on it.

If you need an opener that can quickly and effortlessly open several cans, then a mechanical device will be the best choice. It is the most convenient and less dangerous. But when purchasing a mechanical opener, you must remember that you will need a separate device to open bottles.

When choosing an automatic device, the quality of the tool is important. The best models are made with a body made of metal or high-strength plastic. Automatic openers are convenient, reliable and durable. But we must remember about timely replacement of nutrients. When taking the device with you on a hike or to the country, you need to purchase an additional set of batteries.

Electric models are very convenient for frequent use. But they are not cheap, so before purchasing you need to carefully read the instructions and the warranty period.

How to open a tin can?

When using a manual can opener, hold the device by the handle with your working hand and make a small hole in the sealed lid. Then, without removing the blade, cut through the metal, moving the knife in a circle. In this case, the hook should serve as a stop for the blade. Having completed the circle, lift the cut part with the sharp end.

Video: How to open a jar with a wheeled knife?

To open a tin can with a mechanical can opener, you need to use the blade to pierce the metal from the top. The device is attached to the side on the side, rotates and gradually opens the can when you turn a special twister by hand. With this tool you can handle a lot of cans.

The automatic machine operates using ordinary inexpensive batteries. To work, you need to attach the device to the top of the canned food and turn it on by pressing the button. Before using the automatic opener, you must carefully read the instructions. It is strictly forbidden to open cans that are under high pressure, aerosols, or containers with flammable liquids.

Before working with an electric knife, carefully study the instructions for use. It is necessary to attach the cutting roller correctly to avoid cuts. And while opening, hold the container with one hand.

How to use a can opener

This item is a classic device for opening tin containers with preserved food. Handling it does not require special skills or special training. But you need to ensure that the blade of such a can opener always remains sharp. If the blade becomes dull, the device will not cut through the metal well and opening the container with its help will be problematic.

Ordinary

An ordinary can opener is a simple invention consisting of a wooden or plastic handle, at the end of which a metal knife sharpened on one side and a metal loop are attached.

When using this device, you need to hold the handle with your right hand and use the sharp tip to make a small hole in it.

Then you need to move in a circle, cutting through the tin lid. The steel loop should rest against the edge of the container. You can lift the cover by lifting it with the sharp edge of the key.

With wheel

Wheeled knives are two metal handles joined together. A round wheel is attached to one of the edges of these handles, acting as a knife, the edges of which are sharpened.

Opening a can with a wheeled can opener is quick and easy. To do this, you need to hold the edge of the can between two handles with one hand. And the second is to turn the handle, which drives the cutting wheel.

Moving in a circle like this, the container is easy to open.

This opener is safe to use and requires less effort when opening compared to a regular one. But when using it, you need to constantly turn the container with canned food and make sure that it does not tip over.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]