How to make slime from lens liquid (11 recipes)

Made from PVA glue

The slime according to this recipe turns out to be very soft, but it will take a long time to knead. If you need a more elastic mass, you can add a pinch of powder instead of an aqueous solution of soda. Then the cooking process will take less time.

Ingredients for slime

85 ml PVA glue,
2-3 drops of gouache,
2 tbsp. l. liquids for lenses,
2 tsp. baking soda,
100 ml water.

How to cook at home

The glue must be poured into a cup.
To make the slime bright, the base is tinted.
Next, half the specified volume of lens liquid is poured into it and stirred.
Read also: Battery care. What rules must be followed?
In a separate bowl you need to combine baking soda and water.
This solution in an amount of 1 tsp. poured into colored glue.
Continuing to work the mixture with a spoon, add the remaining amount of lens liquid.
The future slime is kneaded until it curls.
Then you need to knead it in your hands until excess moisture leaves the mass.

How to make slime from lens liquid and PVA glue with your own hands:

Why use thickeners and what they are?

The consistency of the slime depends on the form of the thickener:

eye drops;
borax or borax (sodium tetrobarate);
contact lens cleaning composition;
a drug containing alcohol or salicylic acid;
washing gel;
air freshener;
soda or salt;
Polish for hair;
powdered sugar;
starch;
dishwashing liquid;
gelatin.

Each of the listed funds has its own characteristics and characteristics.

Salt

Sodium tetraborate, also known as borox or borax, and other salt-containing substances are the most effective thickeners, firmly holding the slime together through chemical reactions. The selected components are first thoroughly mixed, then one of the salt products is added drop by drop.

Soapy

If sodium tetraborate is not available, you can use washing gel or washing liquid. The process of creating such a toy does not take much time and it turns out thick and beautiful.

Sprays

Some people make the slime thicker with air freshener or strong hold hairspray. These are very “capricious” products that do not always allow you to achieve the desired consistency. Experienced slime manufacturers recommend choosing thickeners from soda or salt.

Soda

Works as well as sodium tetraborate or salt in most recipes. Use soda in the form of a solution or powder - you need to mix one part of it with three parts of water. Soda gives the product good density and ductility.

Gelatin

It is not a universal product and only works under certain conditions. To make the toy, gelatin is soaked in water for 40 minutes. While it swells, mix the bulk of the other components.

The soaked gelatin is heated over low heat, stirring constantly until completely dissolved, then cooled and added to the rest of the ingredients.

Sugar

It is better to use powdered sugar diluted with liquid soap or shampoo rather than sand. Edible slimes are made from the same thickener, of course, without chemical components.

From office glue

The soda used in the recipe can be poured out all at once. And the solution for CL is added gradually, preferably from a bottle rather than with a spoon. This way it will come out faster and there is less chance of over-thickening the mass. After all, after adding the activator, it needs to be constantly stirred.

Components

100 ml stationery glue,
1 tbsp. l. water,
2 pinches of soda,
2-3 tsp. liquids for lenses.

Making slime at home

First, stationery glue is poured into the working container.
It should be diluted with water so that the slime comes out perfectly transparent and elastic.
Both liquids need to be mixed.
The next ingredient is baking soda.
After stirring, pour in the lens solution in portions.
Between additions, shake the mass with a spatula.
When it thickens, knead the slime with your hands.
The original slime is ready, but if you want to make it transparent, you need to keep it in a closed jar for 1-2 days.

Watch this video on how to make clear slime from lens liquid and office glue at home:

Useful tips

When creating a homemade slime with the addition of liquid for contact lenses, there are some recommendations that will help make the experiment more successful and fun:

the recipes indicate a conditional amount of components, which can be increased or decreased if desired, but the main thing is to maintain the proportions of the ingredients;
if the slime starts to stick to your hands, you need to add more baking soda solution;
To prevent the slime from losing its original properties, you can add a few drops of baby oil or liquid glycerin;
In addition to the main components, you can also add decorative elements, such as sparkles, beads, beads or rhinestones, to the finished anti-stress toy.

You should store your own slime in a hermetically sealed container, otherwise it will quickly lose its elasticity and dry out.

Made from silicate glue

To prepare a soda solution, it is better to take warm water, this will dissolve the powder faster. Still, before adding glue, the liquid must be shaken again.

What to make slime from

200 ml silicate glue,
3 tsp. baking soda,
300 ml+100 ml water,
30 ml lens solution,
2-3 tsp. sequin.

Cooking method

You need to pour soda into one of the two working containers.
This is where most of the water is sent.
Both components should be mixed well and the container should be set aside.
Read also: How to quickly and effectively clean a carpet: secrets of housewives
Glue is poured into another bowl.
You need to add the remaining water to it.
After mixing, lens liquid is poured into the base.
This mass needs to be shaken with a stick.
Then it is poured into the previously prepared water-soda solution.
The glue will begin to thicken there, and this mass needs to be collected with a spoon towards the center of the container.
They take it in their hands and squeeze out excess moisture.
Now the toy can be decorated with sparkles.

Made from PVA and office glue

Both types of glue should work, since their volume in the recipe is quite large. Potato or corn starch is suitable. And instead of shaving foam, you can whisk liquid soap, shampoo and toothpaste in a separate bowl.

Proven recipe

85 ml PVA glue,
50 ml stationery glue,
2 tbsp. l. starch,
1 tbsp. l. hand cream,
1 pinch of baking soda,
2-3 tbsp. l. shaving foam,
3-4 drops of acrylic paint,
0.5-1 tsp. liquids for lenses.

How to make slime

Both types of glue must be poured into a common container.
The next component is starch.
You also need hand cream to make the slime soft.
Next add soda.
The components must be mixed for 2-3 minutes.
Shaving foam is added to the homogeneous mass.
Now the base of the slime can be colored.
All that remains is to thicken the mixture with lens liquid.
In the container with the base, you need to work well with a spatula so that it stabilizes.
The last step is to knead the compacted mass with your hands.

How to make Fluffy Slime with your own hands: step-by-step instructions

Let's look at how to make Fluffy Slime in detail. We will not need many components, and most importantly, you will probably have them at hand. So let's get started quickly!

Ways to remake regular slime

First, let's look at how you can make fluffy slime from regular slime so that it becomes softer, crispier and more clickable.

To do this, try adding various ingredients to a simple slime:

add toothpaste, literally a small ball at a time, until you feel the tenderness you need;
You can also mix shaving foam into your hand chewing gum, and you will be delighted with the unusual exclusivity of your toy;
hand cream is well suited for this task, mix it well with the slime (the consistency of the cream should be slightly liquid, then your new creation will come out well).

No shaving foam

What do you need:

PVA glue, 50 grams;
shampoo, 30 ml;
sodium tetraborate, 0.5 tube.

How to do it:

Shake the shampoo thoroughly until a stable foam forms.
Gradually start adding glue to it, also whisking.
Then pour in sodium tetraborate, continuing to stir. The liquid will begin to curdle.
Take the mass in your hands and knead until you achieve the result.

Without sodium tetraborate

A simple option on how to make Fluffy Slime without sodium tetraborate.

What do you need:

PVA glue, 50 grams;
starch or soda, 1 tablespoon;
water, 100 ml;
food coloring.

Preparation method:

First, we combine water and starch (or water and soda) into a single whole, adding dye there.
Then add glue and stir until a homogeneous viscous mass is formed.
It's best to mix it all up in a slider bag.

From Luch glue

We offer the most affordable and simple way to make slime.

What do you need:

PVA glue “Luch”, 8 tablespoons;
liquid soap (thick consistency), 1 tablespoon;
liquid for lenses, as needed.

Main stages of preparation:

Mix the glue and soap until the entire mixture is smooth.
Pour in the activator (lens liquid).
Knead well and knead with your hands.

Made from PVA glue “Luch” and sodium tetraborate

And this is a method on how to make Fluffy Slime from Luch glue from tetraborate, thanks to which the slime comes out exactly like store-bought slime.

What do you need:

PVA glue “Luch”, 100 grams;
sodium tetraborate, bottle;
dye.

Main stages of preparation:

Pour the dye into the glue in small portions, stirring constantly, and add sodium tetraborate.
When the mixture reaches a jelly-like state, blot it with a napkin to remove excess moisture.
Transfer the resulting soft lump into a tight bag and knead for about five minutes.

From PVA glue “Luch” with water

What do you need:

PVA glue “Luch”, 100 ml;
hot water, 200 ml;
water at room temperature, 2 tablespoons;
boric acid, half a teaspoon;
decorations as desired.

Manufacturing stages:

Stir hot water and boric acid until perfectly clear.
In another container, dilute the glue and 1 tablespoon of water until smooth.
Next, gradually (in small portions), add a liquid solution with boric acid to the glue, mixing thoroughly.
Take the slime in your hands and knead it until the mass is what you need.

From shampoo and PVA glue “Luch”

An option for making a very bright unusual slime with available ingredients.

What do you need:

PVA glue “Luch”, 60 grams;
shampoo, 40 ml;
dye;
sparkles.

Main stages of preparation:

Pour shampoo and glue into a thick slider bag, immediately adding dye and glitter.
Knead thoroughly until a homogeneous consistency is formed. Ready!

Made from lightweight plasticine

Let's look at how to make Fluffy Slime from light plasticine. This new type of plasticine, with a superb silky texture, is super lightweight and ideal for fluffy hand chewing.

What do you need:

light plasticine;
PVA glue, 50 ml;
corn starch, 10 grams;
hand cream (thick, oily texture), 5 tablespoons;
shampoo (thick), 3 tablespoons;
lens liquid, teaspoon;
the water is cold).

Step-by-step instruction:

Mix, gradually adding starch to the glue, then hand cream.
Separately, mix shampoo and water into foam.
Combine both mixtures by adding lens fluid, creating a homogeneous mass that will begin to thicken.
Knead this mixture with your hands and mix light plasticine into it (two parts of the mass - one part of plasticine) and mix until ready.

No glue

For this method of making a toy, the cheapest film mask containing polyvinyl alcohol is suitable. It is better to take a transparent one, but you can also take a black one. The latter should be decorated with sparkles, not balls, or use purple or blue dye that will cover up the dark shade.

Slime ingredients

75 ml film mask,
1 tbsp. l. water,
0.5 tsp. soda,
0.5-1 tsp. liquids for lenses,
2 tsp. multi-colored foam balls.

How to cook it yourself

The mask is squeezed into a working container.
Water is added to it for volume and better texture.
Now the components need to be mixed.
The next ingredient is baking soda.
After adding it and stirring, it’s time for the lens solution, that is, the thickener.
The mass must be kneaded until it coagulates, gradually pouring in the activator.
The slime that lags behind the dishes is kneaded with your hands.
Decorate it with foam balls.

Where to buy PVA for making slime, what does it contain?

Polyvinyl alcohol is a white artificial polymer that is resistant to heat and moisture. It is obtained by chemical synthesis from polyvinyl esters, mainly polyvinyl acetate. You can purchase it in specialized stores or on online platforms.

Polyvinyl alcohol is included in products used for female hygiene and child care. In addition, PVA is widely used in the manufacture of food films, glue, paints and varnishes, as well as for eye drops and lens storage solution. Acts as a thickener in the creation of cosmetic products , latex products and adhesives, and also as an embolic agent in the treatment of cancer.

Gel with glitter

This recipe is good because it has many replaceable ingredients. The foam base can be made from shampoo, liquid soap, or bath foam. It will take a long time to knead the base after adding the activator. And you don’t have to use dye, since the glitter from the colored gel will serve as a beautiful decor for this original slime.

Proven recipe

50 ml glitter gel (5 tubes),
1 tsp. shower gel,
1 tsp. dishwashing detergents,
1.5 tsp. water,
1 pinch of soda,
1 tsp. tooth powder,
1-2 tsp. solution for contact lenses.

Cooking method

Shower gel is poured into a small resealable container.
Next, liquid dish soap is sent there.
The third component is water.
Now this container needs to be closed and shaken until foam forms.
If it seems that there is not enough of it, you can still beat the contents of the container with a spoon.
Add soda to the foam and stir.
Next, tooth powder gets into the mass.
One of the most important ingredients is glitter gel.
After adding it, shake the mixture again with a spoon until smooth.
All that remains is to pour lens liquid into it.
Then the composition is stirred for some time with a spoon.
It is more convenient to do this with your hands before and after rolling it.

Basic Recipes

Slime is prepared from various components. There are a large number of recipes. Some of them do not give exactly the result that a person expects, or do not work at all. But there are also those that have been tested by more than one fan of toys created with their own hands.

Nasal drops

The slime according to this recipe turns out transparent due to the list of ingredients. It will take more time to prepare it, since the composition does not contain strong thickeners. What you need to prepare:

20-30 g of water at room temperature;
0.5 tsp. soda;
35-55 g of stationery glue;
1 pack of nasal drops.

Slime is made as follows:

In a prepared bowl, soda is dissolved in water.
After kneading there should be no lumps left.
Then glue is added and everything is mixed again. The result should be a mass that is homogeneous in consistency.
Nasal drops are added little by little. After each portion, the liquid is mixed. This way the entire contents of the bottle are poured out.
After all the drops have been added and the mass has acquired a uniform consistency, it is transferred to a plastic container. It is advisable that the container has a lid and closes tightly.
The slime should remain in the cold for at least 3 hours. Time varies from 3 to 5 hours.

Nasal drops can be replaced with eye drops. Contact lens solution will also give good results. One of the following liquids will be useful for this recipe.

With shaving foam

This toy is made from just two components. You will need foam and a tube of glue. Glue is squeezed into the container, to which foam is gradually added. The mass is thoroughly kneaded until it becomes homogeneous.

The slime according to this recipe turns out to be white, but you can give it an interesting shade. It is worth adding 2-3 drops of coloring matter, and the toy becomes more interesting and unusual. If you add 2 colors at once, a marble pattern will be noticeable on the slime.

From flour

The advantage of the recipe is safety, thanks to which even small children can play with it. And due to the absence of glue in the composition, the slime is also edible, which the baby will like even more. To make one slime you will need 300 g of flour, ¼ cup of hot water and the same amount of cold water. At the mixing stage, watercolor paint or gouache is added.

Flour is mixed with water until smooth. After this, put it in a cool place for 2-4 hours. Under the influence of cold, the mass becomes more elastic and stretches well, which is what is needed. The slime turns out to be simple, but does not contain harmful components.

air cloud

To make slime you will need many ingredients. When finished, it resembles marshmallows. What is necessary:

liquid soap;
silicate glue;
shaving foam;
sodium tetraborate;
glitter, dye;
sunflower oil.

Cooking steps:

With shampoo

For production you will need starch. Pasta is prepared using water. For the recipe, it is corn that is used. Shampoo is added to the mixture, everything is mixed and put in the refrigerator for 2-3 hours.

With liquid soap

Prepared in two ways. In the first case, you will need polymer glue purchased at a hardware store. Two parts liquid soap are mixed with three parts glue. The final result of the slime depends on the type and color of the soap.

When preparing according to the second recipe, salt and soda are used instead of glue. After adding the components, the mass is mixed until smooth. In this case, salt plays the role of a thickener. If you add a large amount, you will get rubber, so add salt little by little.

How to make it from water and salt at home

For 200 ml of hot water you will need 5 heaped teaspoons of salt. Using a spoon, stir the liquid until the salt is completely dissolved. If desired, a coloring agent is added. Silicate glue is squeezed into the liquid. The size of the slime depends on its quantity. After this, the container is left in this state for 25-30 minutes, without stirring or other actions.

After the specified time has elapsed, the mass is slightly mixed with a stick, and the glue is pulled out of the water. The water is squeezed out, and the mass is kneaded a little with your hands to get a homogeneous structure. After these steps, you can play with the slime. If dye is used during the cooking process, take a plastic container that is not spared for this purpose. Expensive dishes can get damaged.

From cosmetics

In this recipe, you can use regular micellar water instead of micellar water. And you shouldn’t replace lipstick with anything. After all, it gives the toy not only an interesting color, but also softness and elasticity. And in order not to get your fingers dirty, it is better to knead the mixture at the last stage while wearing gloves.

Components

75 ml film mask,
1 tbsp. l. micellar water,
0.5 tsp. soda,
0.5-1 tsp. solution for contact lenses,
0.5-1 tube of lipstick in a stick.

Making slime at home

The first to go into the mixing bowl is the mask.
It is diluted with micellar water.
The composition is supplemented with soda.
And now the components need to be mixed.
At the next stage, lens liquid – activator – is added.
Work the mixture with a spatula until it turns into a thick mass.
Now the base should be kneaded in your hands so that it stops leaving marks on the skin.
Add crushed lipstick to the finished slime.
It needs to be mixed into the mass so that the color and texture become uniform.

Basic Recipes

First of all, you need to buy the main ingredient - a film mask. It is sold in every cosmetics store.

Matte slime

There is a universal way to make slime from improvised materials. It will turn out matte, without characteristic shimmers.

To make it you will need:

Shaving foam.
Tube with mask.
Baking soda.
Dye (optional).
Boric acid powder.

You need to start mixing the slime from the film mask. The contents of the tube are completely squeezed into a plastic container, and shaving foam is added to it. Take a volume the size of a medium orange. Mix the two substances and add dye. You don't have to do this if it's missing.

The next step is boric acid. It is introduced a pinch at a time, along with soda. You can stir at the very beginning with a stick or spoon, but at the moment of reaction it will be difficult to control the equipment, so it is better to knead the slime with your hands so that the components are evenly mixed. The result should be a slime that has excellent ductility, but is not shiny.

Air

This recipe cannot be done without sodium tetraborate. But besides him, there are also helpers.

Compound:

Film mask.
Shaving foam.
Tetraborate.
Starch - 1 tsp.

Take a container in which it will be convenient to mix the components. Almost the entire tube of mask is squeezed out. You can leave 25% of the total composition. Next is shaving foam, three times larger than the slide with the mask. Now the two ingredients are mixed, and starch is gradually added to them. The mixture is thoroughly stirred, and a solution of sodium tetraborate is gradually introduced into it. You need to monitor the thickening process. When the substance begins to twist into the stick, it’s time to pick up the slime and crush it. The result is an airy slime that is pleasant to stretch and knead in your hands.

Transparent

The main thing in this recipe is to buy the main component, which will be transparent. The film mask is purchased in the form of a gel without color, glitter or scrubbing particles. Lens liquid and baking soda will come in handy.

Cooking time is minimal. You will need to squeeze out the entire contents of the tube with the mask into a bowl, then add baking soda. You don't need a lot of it. Enough amount at the tip of the knife. The slime is mixed thoroughly, but during the process, lens care liquid is added little by little.

"Artificial Snow"

This requires a different approach to cooking. Don't expect your child to like this option. Small children want to pull slime that has soft shapes. This one will resemble a piece of ice where a lump of snow has frozen. At the same time, the slime will remain stiffer and less plastic, but the level of jumping ability will become higher.

To prepare slime you will need:

Tetraborate.
Transparent film mask.
Water.

Just three ingredients that work wonders together. You need to add a solution of a teaspoon of tetraborate and a glass of water to the mask. Mix everything. It's better to do it by hand.

Made from lightweight plasticine

The blank of this slime, made of glue, should be a little blurry and wet. Airy plasticine will give the finished toy the necessary consistency. You can take 2-3 similar shades or half a bag of each of the 5 colors in the set.

Components

125 ml PVA glue,
2-2.5 bags of light plasticine,
1 pinch of soda,
0.5-1 tsp. lens solution.

Cooking method

The first component is glue, it must be poured into a cup.
Next, add baking soda.
It needs to be mixed in glue.
The next ingredient is lens solution, which is added gradually.
All this time, the base must be stirred with a spatula so that the liquid curdles.
Then knead it in your hands until the thickened mass stops being very sticky.
A rose is made from multi-colored pieces of light plasticine.
It needs to be mixed with the prepared glue-based slime.

Method No. 3

How to make slime from store-bought slime? - Next option: using mouth rinse.

At first glance, this method seems dubious, but for diligent inventors, it is actually very good.

We will need:

Ready slime (slime)
Mouthwash, refreshing

Place the slime on a clean table. Make sure that there are no unnecessary objects, grease, crumbs, etc. in the workplace. Everything that is on the surface will simply roll in.

Pour mouthwash on top of the slime and start stirring. When the liquid is mixed with it, it will turn into a clear, stretchy slime, very similar to the original.

It “slaps” and “clacks” perfectly, retains air bubbles and curls into a colored rosette, maintaining its shape.

With shaving foam

The recipe uses working, that is, thick glue, any pigment. It’s better to take shaving foam from Gillette or ARKO, the recipe will definitely work with them.

What to make slime from

2-3 tbsp. l. PVA glue,
10-12 tbsp. l. shaving foam,
1 tbsp. l. baking soda,
100 ml water,
0.5 tsp. liquids for lenses,
4-5 drops of dye.

How to cook at home

In one vessel you need to combine soda and water, that is, prepare a solution.
This mixture in the amount of 2 tbsp. l. pour into another container.
The solution for lenses is also sent there, and this is how the activator is obtained.
Glue is poured into the third cup.
If you need colored slime, paint is immediately added to it and stirred.
The next component is shaving foam.
The composition should be made homogeneous.
Then an activator is added to it from a soda solution and lens liquid.
The mass is stirred, as a result of which it curls up.
When you can pick it up, all that remains is to knead the almost finished slime.

Why does it happen that the slime does not thicken, and how to fix it?

There are several reasons why your slime is not thickening:

Too much water. If you used a lot of water while making slime, the slime will turn out runny.
Not enough thickener. If you vigorously stir the liquid for several minutes and the slime still does not thicken, you may not have added enough activator.
Incorrect thickener. Study the list of activators suitable for making slime - it can be found at the beginning of the article.
Unsuitable glue. Try to buy a new tube of glue to make slime. In addition, some types of glue are not suitable for creating slimes.

How to fix excessive watery slime:

If the recipe used glue and water, the glue solution might turn out liquid and the activator might not work. To fix this, add glue and mix the mixture again.
Put the slime in the refrigerator - sometimes after cooking it needs to “ripen” for a couple of hours.
Mix the slime thoroughly and knead it with your fingers until the mass thickens.
Add the activator - be careful and add the thickener in small amounts, otherwise the slime may turn into a chunk of hard goo.

With shower gel

This recipe will help you understand what jelly slime is. You don’t have to add shampoo to it, but just get by with shower gel, increasing its volume. Instead of baby oil, glycerin purchased at the pharmacy is suitable. And the cream is replaced with body lotion. It is important not to disturb the proportions of soap and fatty components, otherwise the composition will not be able to be made homogeneous, it will simply separate.

What do you need for slime?

50 ml stationery glue,
4-5 drops of acrylic paint,
1 tbsp. l. shower gel,
1 tsp. fat cream,
1 tsp. shampoo,
1 tbsp. l. water,
0.5 tsp. baby oil,
1 tbsp. l. liquids for contact lenses.

How to make slime at home

The glue, as usual, is squeezed out of the tube into a larger container.
You can immediately color it so that the slime has an interesting color.
And for its elasticity you will need shower gel.
The nourishing cream will give the toy shine.
At this stage, the composition should be made as homogeneous as possible.
The next component is shampoo.
Next, water is poured into the base.
Stir the mixture thoroughly again with a spatula.
For shine, add baby oil.
After shaking again, add lens liquid in parts.
Stir the base with a spatula until compacted.
All you have to do is knead the slime in your hands until it gets rid of the stickiness.

Which lens liquid is suitable for slime?

Contact lens liquid is practically on the pedestal of the list of slime thickeners, second only to sodium tetraborate. This activator is affordable and easy to use. It does not need to be diluted before adding to the mass; in some cases, soda may be required to enhance the chemical process.

But it is still worth understanding that not all existing means are suitable. When choosing a product of this kind for this purpose, it is important to pay attention to the presence of sodium tetraborate or boric acid (borates) in the composition.

With starch

Thanks to the starch in the composition, this slime turns out to be very soft, but not a spreading puddle. And you don’t need to use glue, the specified volume of the film mask is enough. That is, the toy turns out to be not only beautiful, but also cheap.

Easy recipe

14 ml film mask,
2 tbsp. l. starch,
1 tsp. hand cream,
5-6 tbsp. l. shaving foam,
3-4 drops of gouache,
0.5-1 tsp. lens solution.

How to properly care for slime

This toy has a limited lifespan. For purchased representatives this is a maximum of six months, for self-made ones - three months. This figure directly depends on the storage method. There are certain requirements in this matter:

The best place to store it is in the refrigerator.
Direct sunlight is not allowed.
The container where the slime lives must be airtight.
From time to time the mass needs to be crushed and fed.

Compliance with the rules described above will not only allow you to enjoy the game throughout the entire declared service life, but may even extend it.

Regardless of which recipe is chosen for creating an anti-stress toy, it is very important to maintain proportions and include imagination. Even the simplest slime can be turned into a real miracle with a minimum amount of additional ingredients.

For example, using metal oxide you can make real magnetic slime.