How to clean the ceramic soleplate of an iron and return it to its original smoothness

The nuances of cleaning the soleplate of an iron with a ceramic coating

If you violate the operating rules of an electrical appliance, for example, set the wrong temperature when ironing, stains may remain on the surface. This is especially true for synthetic fabrics, which stick when heated too much. This leads to poor gliding of the iron. The stains can also leave dirty streaks on clothing. Therefore, they should be removed immediately after their appearance.

Before cleaning an iron with a ceramic sole, you need to familiarize yourself with the features of such models:

• the ceramic surface is fragile and easily damaged, so you cannot use rough brushes or caustic substances for cleaning: they can scratch or damage the enamel;
• You cannot wipe off stains from cermets when they are hot; you need to wait until the iron cools down to at least room temperature.

Be careful when smoothing things with metal fasteners and zippers, they may leave scratches in which dirt will begin to accumulate and glide will be impaired. Iron linen and cotton items on the right side. Wipe the soleplate of the iron thoroughly and do not forget to drain the water. Never iron clothes that have dirt on them; the temperature will transfer it to the ceramics and stain other items.

Household chemicals

All of the above methods of cleansing are simple and always available. However, in some cases it may be advisable to use purchased products. They not only carefully remove any dirt, but create a protective film that promotes smoother sliding over clothing and protects against future salt deposits.

The most popular means are:

• WPro is a soft cream without alkali content. It is applied to the surface and left for 15 minutes. Then thoroughly clean the carbon deposits, wipe with a napkin and dry. The manufacturer claims that you can clean the soleplate of your iron with this cream much faster and more effectively than other similar competing products.
• Cif Active is offered to the consumer in the form of a spray and is used to remove various stains. Apply to the ceramic surface using a sprayer. After 15-20 minutes, wipe the product with a damp sponge. The device is turned on and the unnecessary fabric is ironed to consolidate the result.
• Many people prefer Shumanit BAGI, as it is capable of removing any stains, even old ones, in seconds. Simply apply the product and let it sit for 15 minutes, then wipe off.
• TOP HAUSE is designed for professional cleaning. It is produced in the form of a set that includes a liquid cleaner, a pencil and a napkin. Able to ideally remove limescale from the internal parts of an electrical appliance.
• It has been noticed that Kenolux grill cleaner also copes with carbon stains on the soleplate of the iron. Moreover, it cleans quickly, effectively and safely. The liquid is evenly distributed over the surface to be cleaned and left for ten minutes. Then rinse off and wipe dry with a cloth.

Methods for cleaning the ceramic soleplate of an iron

Gentle products are suitable for cleaning the soles. There are many ways to clean a ceramic-coated iron from carbon deposits at home: those that are always at hand.

Using improvised means

The easiest and most convenient way to remove dirt is to use one of the items that can be found in every home. These include products often used for cooking, personal care products and even medications.

How to clean a ceramic iron sole with salt

You will need regular table salt:

1. Take a cotton or linen cloth and add about half a cup of fine salt (coarse salt may leave scratches).
2. Fold the edges of the fabric so that you get a kind of bag, and grains of salt do not spill out of it.
3. Turn on the iron, and when it gets hot, unplug it from the outlet and place the device vertically.
4. Bring the bag of salt to the surface of the sole and lightly, almost without pressing, rub it over the stains, getting rid of them.

You cannot run the iron over the salt directly, not through a rag. Especially when the sole is hot. This will damage the enamel.

How to clean a ceramic iron with vinegar essence

One of the easiest ways to clean a ceramic and aluminum iron without harming the device:

1. Take acetic acid 7 or 9% and dilute it with water (table vinegar does not need to be diluted).
2. Dip an unnecessary rag or cotton pad into it.
3. Turn on the iron and let it get as hot as possible.
4. Carefully, so as not to burn yourself, wipe the surface with a rag or cotton pad.
5. Clean the steam holes with cotton swabs.
6. Then iron the fabric soaked in vinegar essence with a hot iron, then dry; the last traces of burning will remain on it.

Be careful: you should not inhale vinegar vapors, as this can cause burns to the mucous membranes. When working with vinegar, use rubber gloves to avoid harming the skin of your hands. After ironing, ventilate the room.

How to clean a ceramic iron sole with hydrogen peroxide

Another way to deal with burnt marks is to wipe the stained area with hydrogen peroxide:

1. Take a cotton pad or piece of rag soaked in peroxide and turn on the device.
2. When it gets hot, gently wipe the sole.

A sharp unpleasant odor will appear. This is fine.

Toothpaste as a means to clean carbon deposits from the ceramic soleplate of an iron

Regular toothpaste can help clean the ceramic soleplate of your iron. The cheapest one is perfect, because it contains a lot of chemical cleaning agents. Procedure:

1. Turn on the device to the minimum temperature.
2. Using a cloth, apply a thin layer of paste to the sole, spread and rub with light force; You need to act quickly, it freezes almost instantly.
3. Wipe off any remaining paste with a clean, dry cloth: there should be no white residue left.

Do not use a brush; it will leave scratches on the fragile enamel.

Cleaning the soleplate of the iron from stuck fabric with laundry soap

Soap works well on small fresh stains. Regular one is also suitable, but household one is better in composition.

Work algorithm:

1. Rub some bar soap into a glass of water to make a paste.
2. Dip a foam sponge into it and spread it over the material.
3. Wait 5-7 minutes and rinse thoroughly with clean water.

This can be done with both cold and hot appliances. In the second case, wait until it cools completely before washing.

How to remove burnt marks from the soleplate of an iron with regular baking soda

Soda is suitable for removing old and stubborn dirt, but is milder than salt:

1. Dilute baking soda with water at room temperature in a ratio of 1 to 2.
2. Using a piece of cloth, spread the resulting mixture onto the desired areas and rub lightly.
3. Leave for 10 minutes.
4. Then remove any remaining product with a cotton rag.

You can use dish detergent instead of water. It needs to be washed off with a damp sponge.

How to remove carbon deposits from a ceramic iron with citric acid

Citric acid will not cope with strong and old stains, but it will effectively remove small deposits:

1. Pour 3 cups of warm water into a large bowl and dissolve 60 grams of citric acid powder in it.
2. Dip the soleplate of the iron into the solution and leave to soak for 10 -15 minutes (the electrical parts and the body of the device must remain dry).
3. If dirt remains, wipe the surface with a cotton pad.

Citric acid is also suitable for descaling from the inside for those models that do not have a self-cleaning system:

1. Add acid water to the tank.
2. Set the temperature to maximum and release steam.
3. Repeat the procedure several times.
4. Then drain the liquid and rinse the container with plain water.

For better effect, manipulations can be repeated several times. Instead of acid, sometimes half a fresh lemon is used: after the procedure, a pleasant aroma will remain.

How to restore a ceramic iron to its original appearance using ammonia

Ammonia will quickly get rid of burnt fabric:

1. Turn on the device.
2. Moisten an unnecessary rag with ammonia and rub the contaminated area of ​​the material.
3. There will be a strong smell, so open the windows in advance.

To enhance the effect, you can add acetic acid to ammonia in equal proportions, and then follow the same procedure as cleaning the iron. The ceramic appliance will look like new.

Chemicals

Although improvised means can successfully clean carbon deposits from a ceramic-coated iron at home, there are devices created specifically for this purpose. Thanks to a special formula, they not only remove existing stains, but also prevent the appearance of scale in the future, thereby extending the service life of the iron. By using them, you don’t have to worry about their safety and the integrity of the material. In addition, they are all sold in any hardware stores and have a relatively low price.

"Antinakipin"

A convenient solution for cleaning metal ceramics is professional descaling products. They come from different manufacturers and come in two formats: powder in a box or liquid bottled gel.

Their operating principle is similar:

1. The gel or powder must be diluted in water in the proportion indicated on the package and poured into the reservoir.
2. Warm up the device.
3. After some time, the solution must be drained and the tank washed under running water.

One pack of the substance is enough for several uses.

Pencil for cleaning the soles of irons

Special pencils remove accumulated dirt well and restore shine to the material. Their composition is approximately the same, you can take any. Procedure:

1. Heat up the iron.
2. Hold the pencil so that you do not touch it with your bare hands.
3. Swipe it over the entire area of ​​the sole; It melts quickly, so be careful not to burn your fingers.
4. Hold the device vertically, this will prevent melting ammonia from entering the hole.

Iron the previously prepared old fabric; all the dirt and sticky mass will remain on it.

How to remove traces of synthetics?

If synthetic fabric sticks to the iron while ironing, immediately turn off the device, let it cool and immediately begin removing carbon deposits. You can use both ready-made chemicals and folk remedies to eliminate the problem.

First of all, get rid of material fibers stuck to the sole : moisten a rag in acetone and wipe the ironing element, clearing it of synthetics.

If this method does not help, try carefully removing the thick deposit with a wooden spatula (ruler) or a special silicone scraper designed for glass-ceramic stoves.

Next, follow these steps:

• wet a piece of clean cloth in warm water and wring it out;
• Sprinkle soda powder evenly over the material, wait a little until the crystals of the product begin to dissolve;
• Carefully, without force, wipe the cold sole with a cloth and soda, remove any remaining product and dry the treated surface.

You can enhance the cleansing effect of this method by squeezing a little lemon juice onto the baking soda.

How to get rid of old heavy carbon deposits on the ceramic sole of an iron

If used incorrectly, even non-stick material may become dirty. For example, a piece of polyethylene accidentally found in clothing may stick. Subsequently, the fabric underneath will burn. If you leave the contamination as is, it will lead to damage to things.

Old and strong stains can be removed with the same substances as regular stains, but this requires more time and effort. Therefore, when dirt appears, you need to act immediately to avoid consequences such as stains on clothes and uneven ironing in the future.

What products should not be used to clean ceramic irons?

Since ceramic is a fragile material that is not prepared for rough use, refrain from using harsh abrasives, wire brushes or knives. It is forbidden to rub the sole of the device directly with crystalline substances, such as salt or soda, as they will leave deep damage. Chemical solutions are used strictly in the required ratio. For example, undiluted vinegar can corrode delicate materials.

By following simple operating rules, you can keep your electrical appliance in good condition for a long time. To prevent scale formation inside the device, fill it only with filtered water. For each type of fabric, choose the temperature setting set by the manufacturer.