How to clean yellow fur from white fur at home

Fur products in light colors look chic and have a considerable price. However, after a certain time, a thing made of white fur, both natural and artificial, tends to acquire a yellowish tint and loses its attractiveness.

Everyone knows that products made from white, beige and light fur are capricious and need special care.

The appearance of the slightest trace of dirt on a fur coat or elements of clothing immediately spoils the appearance of the outfit and the presentability of the owner as a whole.

To restore the original cleanliness and shine of such clothes, it is not necessary to immediately look for the nearest dry cleaner.

Cleaning yellow fur from white fur at home does not require significant time and financial expenses.

For what reasons does yellowness appear?

Today, manufacturers of fur products use modern technologies in the dressing procedure, adding special substances that stabilize and fix the color in order to delay the yellowing process.

However, despite all efforts, it cannot be completely eliminated. Light-colored pile turns yellow not “suddenly,” but over time, and if you don’t compare it with new things, then you may not notice this phenomenon for two or three seasons.

Light furs turn yellow for several reasons:

Perhaps the item was in contact with water;
incorrect storage. If a fur coat is simply hanging in the closet, not covered, with constant use of the closet (opening) a certain visible area will gradually fade;
frequent exposure to sunlight can turn the pile yellow;
dust accumulation, smog and soot are common “urban” causes of yellowing;
perfume effects and products containing essential oils tend to discolor the pile;
frequent contact with human skin and its secretions.

Causes of yellowing fur

Over time, fur products lose their former appearance and begin to turn yellow. There are several reasons for this:

Water. Despite the fact that a fur coat is worn in winter, when it often snows, it turns yellow when exposed to moisture. To prevent the product from deteriorating, it is necessary to dry it after each wear.
Dust. With a large accumulation of dust, light fibers lose their saturation and shine.
Sweat. Yellowness usually appears on the collars, where the fur comes into contact with the neck and back of the head. Sweat accumulates in these places first, which negatively affects the appearance of the fur coat.

To avoid damage to fur items, you need to remember the following rules:

You should not wear a fur coat if it is raining or snowing outside.
It is necessary to store the product correctly: pack it in a special bag and do not expose it to direct sunlight. Also, the humidity of the room should not be high.
If your fur coat gets wet, dry it with a cool hairdryer or fan. Exposure to hot air should be avoided.
In warm weather, it is necessary to remove fur clothing so that it does not get wet due to sweat.
The fur needs to be cleaned regularly with a special brush.

Attention! Yellowness appears on old fur coats - this is normal. In this case, you can give the product to a specialist for restoration or think about buying a new one.

Store funds

In order for a fur coat to retain its original appearance for as long as possible, you need to regularly care for it and do it correctly.

There are many professional products for cleaning such things. Cosmetics for the care of fur products are represented by the following types:

cleaners for various types of stains;
fur structure and shine restorers;
cleansing wipes for quick, superficial removal of dirt;
deep impact foams.

They have degreasing, water-repellent, cleansing, antiseptic and hypoallergenic properties.

Do not contain aggressive chemical components. Absolutely harmless, the components included in their composition are used in the direct dressing of fur, final finishing of the product and in pre-sale preparation.

These kits are capable of performing the entire range of fur dry cleaning at home and rid it of yellowness.

The principle of their operation is to apply or spray the product onto the desired areas of the fur and after 3-5 minutes wipe it with a clean napkin or damp terry towel.

A good option would be shampoo for pets, as it is intended specifically for similar fur.

Cleansing with it will not only remove dirt, but will also help get rid of yellowness.

It is very simple to use: the shampoo is diluted in warm water and the product is wiped in the direction of the pile using a cloth soaked in it. After this treatment, the fur coat should be blotted with a towel, dried completely and combed.

Recommendations for storage and care

And yet, many troubles such as yellowness, grease and dirt stains can be avoided if you follow the rules for caring for the Arctic fox:

do not allow it to become completely wet: the mesh, that is, the leather part of the product will certainly become deformed;
if the fur coat gets wet, straighten it and hang it on hangers in a dry room;
When cleaning fur, do not rub the product too hard;
after drying, do not place the product in polyethylene, but store it in a cotton cover (bag);
regularly clean with a brush to remove dust and light dirt;
Only completely dry fur should be combed;
if the pile is long, you need to comb it in the direction of growth;
To restore the Arctic fox's shine, apply a little glycerin to the brush and run it through the pile.

Yes, following these tips will take you an extra ten minutes. But experienced housewives will confirm: it is easier to repeat these manipulations regularly than to clean off complex stains.

How to clean natural fur from yellowness

You can remove yellowness from natural fur using wet cleaning, the methods of which will be described below.

Before such treatment, the fur coat must be shaken several times, ridding its pile of accumulated dust and other solid particles of dirt.

A more gentle way would be to place the product on a slightly damp cloth and lightly knock it out.

The whitening process should be approached responsibly and carefully. The product you decide to use for this needs to be tested on a small, inconspicuous area.

Using hydrogen peroxide

Probably the most affordable and relatively effective method for cleaning yellowed fur. The solution is prepared by mixing water and peroxide in a 1:1 ratio.

This mixture is sprayed onto the surface of the product and hung on hangers to dry, after which it is combed with a brush and beaten. The main thing here is to make sure that the solution does not get on either the core or the lining.

Using baking soda and rubbing alcohol

Quite an old method for cleaning fur from yellowness at home. Preparation of the product consists of diluting soda and alcohol in water. 3 parts of soda are added to one part of alcohol, mixed and added to a glass of warm water.

A cotton swab or sponge is moistened in the resulting solution and the product is carefully wiped according to the growth of the pile.

Using this method, you can not only clean yellowed fur, but also clean the fur from dust dirt at home.

Using vinegar

Another simple and easily accessible method. To clean white fur from yellowness, you need to stir a tablespoon of vinegar in a glass of warm water and soak a cotton pad or piece of cloth in the resulting mixture, squeeze out the excess liquid, and treat the yellowed areas. After the procedure, the item should be dried and combed.

Precautionary measures

Do not allow the fur to become completely wet. This will certainly lead to deformation of the product, and it will be impossible to restore it.
Fur should only be dried naturally, that is, indoors, by hanging the item on a hanger. Accelerated drying using heating devices is detrimental to fur products.
You should not hang wet items made from undyed and dyed fur side by side to dry: undyed fur will definitely become dyed.

So, proper care and proper cleaning of fur items will allow them to maintain their chic appearance. A video that clearly shows all the methods for cleaning arctic fox fur that are available at home will help convince you of this.

Our reader sent us a letter and we simply could not leave it unanswered. She writes:

“My husband gave me an arctic fox fur coat for our anniversary. And I have very mixed feelings. On the one hand, I’m very pleased, everything looks beautiful, luxurious, but, on the other hand, I’m afraid to sneeze on it - I’m afraid that unnecessary cleaning will only ruin the fur.

However, even though I wear it as long as I can, the fur coat has already lost its original shine, and in some places even small stains have begun to appear. Is there any way to safely clean it without taking it to the dry cleaner? So that it definitely doesn’t get worse, so that it doesn’t cause harm?”

— Veronica, 27 years old.

Arctic fox fur looks lush and rich, and also provides excellent protection from the cold, which is why it is so often used to make fur coats and other fur products. But to ensure that these products do not lose their luxurious appearance over time, they must be cleaned - and done correctly. After reading this article, you will learn how to clean arctic fox fur at home without harming it.

How to clean faux fur from yellowness

White faux fur can be cleaned of yellowness at home using almost all the methods described above, except for the option with vinegar, in order to avoid burning the lint.

The main advantage of this fur can be considered the possibility of hand washing. But we do not recommend resorting to this procedure.

Using glycerin

Glycerin is mixed with water in equal parts, the mixture is stirred and the fur coat is treated with it using a sponge. After which the product must be dried naturally. If necessary, the procedure can be done again.

With the help of blue

For half a liter of water you will need 1.5-2 grams of blue, the water should turn out to be a slightly bluish color, you need to pay special attention to this.

As in other cases, a sponge is moistened in this water and the fur is wiped with it. This should help clear the yellowness from your fur coat.

What not to do

You cannot dry arctic fox fur on heating devices.
Do not use strong chemicals for cleaning, such as bleaches or concentrated powders.
Do not wash fur using conventional methods - hand washing or machine washing. There is a possibility that the pile will shed.
After cleaning the fur, the product must be dried thoroughly; you cannot go outside in wet conditions.
Do not rub or press hard while cleaning. After drying, the product should be placed in a cotton bag.

To clean arctic fox fur at home, it is not necessary to go to a dry cleaner. You can carry out this procedure yourself.

Reading time: 3 minutes. Published 11/28/2018

Arctic fox fur, even with the most careful use, tends to become dirty over time. This manifests itself in the loss of the original shine of the pile due to atmospheric and temperature influences, a change in shade and simple dustiness.

If the contamination is insignificant, products made from arctic fox fur can be cleaned at home.

These methods should absolutely not be used

There are some methods for cleaning fur items, offered on the Internet by many sites, but their benefits are unlikely, the components are questionable, but correcting the situation to which these methods can lead will be problematic, if not impossible.

So, the components in these methods are:

petrol. This substance can not only spoil the fur coat externally, but leave a stable and long-term specific odor on it;
starch. Like other fine-grained bulk substances, if they are rubbed into the fur, they are practically not completely combed out;
Sawdust. In the case of fur, their absorbent properties are very doubtful, but the problematic removal of their residues (dust) from the pile is exactly what awaits those who decide to try this method;
ammonia. You can find recommendations on many resources for cleaning fur with this alcohol and salt. As in the case of gasoline, it will leave an unpleasant odor and, in addition, will make the fur tough;
semolina and flour. By analogy with starch;
lemon juice. Faux fur is intolerant to various acids, which include lemon juice. Its use can cause both discoloration and dryness of the pile;
wheat bran. As with sawdust, the bran will become embedded in the undercoat and fur and will be very difficult to remove, plus it will leave a dirty color on light-colored fur.

Cleaning using special products that are easy to buy in a specialty store

Cleaning faux white fur is simple and easy. You don't even have to make any special efforts to do this.

There are special products that are easy to buy in fabric stores.

Detergents containing large amounts of surfactants are suitable. They are usually used for cleaning carpets and upholstered furniture. Read more about them here.

All such products contain detailed operating instructions.

Some tips for caring for white fur

So that every time, before putting on a fur product, it does not need to be urgently put in order, you should follow several recommendations:

during the cleaning process, it is important not to overdo it with the processing of fur - do not rub it too much, do not wring it.;
For long-term storage, a fur coat should be placed in a fabric or paper cover;
It is imperative to ensure that there are no moths in the closet. To do this, you can put orange peels, a little tobacco or geranium in it;
It is prohibited to keep a fur product in contact with other colored clothing.

You need to know that preventing most problems with fur is much easier and less expensive than dealing with the consequences.

Share this useful information with your friends and join us on social networks!

Adviсe

In order for the product to last a long time and not turn yellow, proper care is necessary:

Shake out the item after coming from the street;
Make sure there is good air circulation in the closet;
Brush the product with a brush every 3-5 days;
Identify and clean up contamination in a timely manner. If the collar is dirty, start cleaning immediately;
Do not use heating devices or fans for drying;
Try not to wear fur in wet weather;
Do not use automatic washing frequently;
Dry the product horizontally on the balcony;
Place moth repellent in the fur coat storage area;
Before purchasing household chemicals, read the composition to exclude options with coloring substances;
Do not store brightly colored clothing next to fur, otherwise the color may be ruined.

Arctic fox fur requires careful care. It is important to clean products in a timely manner, even in dark colors. If heavily soiled, contact a dry cleaner.

Attention! You can take part in our competition!

Send a video about how you solved your problem (washed a stain, cleaned a frying pan, or coped with some other household task) and get 400 rubles!

Details here »»

Cleaning fur on boots

If dirt has formed on your boots, then you should definitely use practical tips on how to clean faux fur on shoes. To do this, you need to use products that will remove dirt without changing the color of the product. An effective remedy is baking soda, which is rubbed into contaminated areas with your hands until it changes color to gray. Thanks to this product, you can quickly and effectively deal with dust and dried dirt. Remaining soda can be removed by shaking the boots several times.

In addition to soda, you can also use flour, talc or potato starch, which are also rubbed into the fur edge of the boots, and then shake them thoroughly.

Easy cleaning

If a dust deposit has formed on the product, it can be removed by knocking it out. This method is suitable not only for fur coats, but also for hats, collars and shoes. Here's how it's done:

Place the item with fur on a damp cotton cloth so that the lint is at the bottom.
Use a beater to remove dust by lightly patting it.
Smooth out the product and dry it.

If this method does not help, you should clean the item with soapy water. The procedure is as follows:

Hang your clothes vertically on a hanger.
Pour shampoo dissolved in warm water in a proportion of 3 tbsp into a large container. l. per liter, stir until foam appears.
Apply this foam to the fur with a brush, avoiding the fabric base.
If the length of the pile is less than 2 cm, you need to brush it from the end to the base of the hair, if longer, in the opposite direction.
Remove any remaining foam with a cotton cloth or wet wipes.
Dry the fur with a towel that absorbs water well, then dry it outside or in a ventilated room.
When the product becomes dry, comb it with a wide-toothed comb, preferably a metal one. This is necessary so that the pile does not fluff, does not stick together and looks beautiful.

Attention! You cannot dry fur, both natural and artificial, in the sun, near a fire, or near heating devices. It is also not worth speeding up the process in various ways: the clothes may change color or become deformed.

To make the faux fur shiny after cleaning, you should make a mixture of 0.5 liters of alcohol, 0.5 liters of water and 1 tsp. glycerin. The resulting product must be carefully applied with a cotton swab or a spray bottle, then the pile is dried and combed again.

Deep cleaning

The previous methods are only suitable if the stains are light, but for more serious stains, synthetic fur clothing will need deep cleansing. You can remove heavily absorbed dirt using improvised means that can be found in any home. Using the methods listed below, you can clean fur not only on clothes, but also on warm shoes, for example, boots or boots.

Washing powder

Dissolve 4 tbsp. l. powder in 1 liter of water, beat the foam.
Soak a cloth in the resulting solution and rub the stain using movements from the edge to the center.
Use a clean damp sponge to remove any remaining foam.
Dry the clothes at a temperature of 20-25°C, then remove the remaining dirt with a cloth and straighten the fur.

Instead of washing powder, any other detergent is suitable that can gently clean the pile and remove dirt well: liquid soap, shampoo, washing gel and others.

Professional products

There is a wide range of fur cleaning products available in stores. In addition to specialized household chemicals, you can also use substances for washing carpets and upholstered furniture.

Ethanol

Ethyl alcohol can clean a wide variety of stains, including stains on faux fur.

You need to mix a glass of water, 1 tbsp. l. soda and 1 tsp. alcohol Then you need to clean the fur with a sponge or cloth soaked in this liquid, moving from its base. A dry cloth will help remove any remaining solution.

Important! Don't forget to comb your synthetic fur items, this will give them a neat appearance.

Starch

The good thing about this method is that you don’t even have to wet the item. This is especially convenient if you need to clean a faux fur coat.

Potato starch must be poured directly onto the dirt, rubbed with a soft brush, then shake off the residue or remove it with a vacuum cleaner (only if the device is clean).

There is another method using starch. In addition to this substance, you will need washing powder and dishwashing liquid. All three products are mixed in equal quantities. Treat the stain with the resulting mixture and then rinse with a clean, damp cloth.

Advice! Instead of starch, semolina is suitable.

Absorbents

To remove a greasy stain that has appeared recently, you can use any substance that absorbs well: flour, baby powder and others. However, this method will only work if the contamination has not yet reached the base.