There are a considerable number of alternatives to a regular bed, among which air-inflated mobile options are particularly popular. The only difficulty that users encounter in practice is finding the right option for how to deflate an air mattress. The actual difficulty lies not in removing the bulk of the air, but in completely eliminating it from the cylinders.
You can pump it up using a manual or electric pump, and it takes a small amount of time and effort. There are also individual characteristics here, but it is not easy to notice them when performing a task.
Peculiarities
To quickly deflate an air mattress, you will need to adhere to a whole set of requirements. But at the very beginning, the surface is prepared for storage. To do this, the material is cleaned with soapy water without aggressive chemical cleaners. The surface of the product dries completely on its own without the use of any heaters.
Particular attention is paid to the valves on the mattress through which air is released. There are 3 options for these products:
- Classical. First, the product protection is unscrewed, after which the valve is slightly compressed to allow air to escape. A common technological solution due to its combination of simplicity and reliability.
- Bicycle. The valve is compressed on both sides with your fingers or using a match, we press on the nipple in the central part. The product is twisted by two or more people, because it is impossible to do it alone.
- Removable. This valve model stands out for its simplicity among analogues, because to activate it, you just need to unscrew the plug, after which the mattress deflates itself as quickly as possible.
A single product deflates in 10-20 minutes, after which it is packed in a special bag or other structure for subsequent storage. You cannot leave an air mattress in direct sunlight, as this will cause it to quickly deteriorate.
Advantages of a mattress with a valve
Models and brands of air beds are made with a variety of valves, so when deflating, you need to consider the shape of the valve.
- To deflate a mattress with a classic valve, you need to open it, apply light pressure and twist the product little by little.
- In the case when the valve is designed like a bicycle or a car, you need to press it with your fingers on both sides, and the hole will become open for easy release of air. In another case, you can use a match by pressing it on the central nipple. It will be convenient for two people to work here, when one blows and the other twists.
- Models with a removable valve are the simplest. It is necessary to unscrew the valve entirely, and the air will quickly come out on its own.
- There is an option when for downloading you can use the same electric pump that was used to inflate. You just need to turn on the “Air release” mode. In this case, you should not use a hand pump.
We recommend: How and with what to remove glue from a sticker from glass: a selection of the best recommendations
Mistakes when deflating a mattress
Before asking how to blow air through a valve from an air mattress, let’s take care to eliminate common mistakes in advance.
Most people in such a task make the following inaccuracies:
- Surface. It should be as even as possible, because this will eliminate even slight retention of air in the product.
- Items. When deflating, the likelihood of punctures and cuts is especially high, so sharp objects must be removed away.
- Heaters. Sources of high temperature deform the rubber base of the product, so it is advisable to move them away from the assembly site.
- Minus. Freezing temperatures destroy rubber and a number of other materials, which is why they should not be kept indoors.
- Pumps. Only special models with low pressure are used, because in this case ideal air removal is ensured without damage to the elastic structure.
Avoiding them is quite easy if you prepare in advance and don’t rush. Before sending each air mattress for storage, we carefully inspect it for damage and stuck objects, so that when waiting for the next use, the condition of the product does not deteriorate. In this case, the result always turns out to be expected.
How to deflate an air mattress
The method of removing air from an air mattress depends on its design and configuration. In the absence of pumps, determine the type of valve, open it and wait until the bulk of the air comes out, then collapse the product.
We use built-in pumps
They are included in the Comfort quest, Intex, Nordway models. Devices can be electrical or mechanical.
Electric pump
You just need to select the deflation mode, press the desired button - and the pump releases the air in no more than 5 minutes. There can be several options for power sources for an electric pump: a household power supply with a voltage of 220 V, batteries, a cigarette lighter in a car.
Mechanical
Deflating an air mattress with a pump driven by the muscular strength of the arms or legs will not work as quickly as with an electric one. At the same time, lowering does not require a power source, the products are affordable, and are not afraid of moisture. A foot pump is more convenient: it has a larger chamber than a manual one, which allows you to deflate air 3 times faster. Inflatable products of the Bestway, Intex, and Comfort quest brands are equipped with built-in mechanical devices for inflation.
External pumps
To deflate Quechua and Outventure mattresses, you will have to separately purchase an electric or mechanical pump:
- The electric pump can be dual-mode or conventional. In the first case, set the “Air release” mode and connect the pump hose to the mattress valve. The descent is carried out after pressing
- If the electric pump does not have a pumping function, you will have to plug the air intake hole. At this moment, automatic pumping begins.
- To connect a mechanical device, a special adapter is put on the valve. It is more convenient to work with a foot pump (“frog”), but first you should find out from the instructions which of its chambers to press.
Tip: When buying a mattress without a built-in pump, find out whether the package includes an adapter for an external pump unit.
How to deflate an air mattress
To deflate as quickly as possible, you will need to follow simple instructions. The process is carried out strictly according to the plan described below:
- Initially, the valves open so that the air escapes under its own weight;
- the mattress is then rolled up to concentrate the air in the area of the valves;
- when there is nothing left inside the cylinders, the air mattress is folded for subsequent storage in a special bag or box.
You cannot make any effort or try to increase the speed, because the air itself comes out as quickly as possible. Therefore, haste is likely to damage the product. Next, the mattress is put away for storage, and subsequent inflation will not bring any surprises.
Features when choosing a product
Today you can find a variety of models of air mattresses . They differ according to the following criteria:
- Dimensions (single, one and a half, double, European);
- Height (13−56 cm);
- Colors.
The main thing when choosing a product is its quality. A quality product has the following advantages:
Comfort;- Mobility;
- Compactness;
- Convenient transportation.
When choosing a product, you need to focus not only on its cost, but also on its properties. As an additional measure, you can read customer reviews to avoid any unpleasant surprises.
How to flush with a pump
If you are wondering how to deflate an air mattress using a pump, then the process here turns out to be much simpler and faster. After the preparatory work and deflation of air under its own weight, the following series of steps are performed:
- the pump is connected to the valve, and the remaining holes are clogged (in some models 2 or more valves are used);
- air is removed using draft;
- the pump is detached and the product is folded for storage.
Proper deflation of the mattress will allow you to get the perfect result without wasting time and effort. In addition, the structure will remain in perfect condition, making it possible to use it in the future without the slightest fear.
Valve differences
The design of the valves in different models may differ greatly, which, accordingly, makes adjustments to the deflation process.
Cork on the bow . The most “primitive” option, more often used in simple and swimming models. To deflate the mattress, the valve is opened, allowing air to escape unimpeded. All that remains is to wait.
Important! It is not recommended to press down to speed up!
Screw-on plug . Also from a series of extremely simple devices. The same plug, only more reliable. The hole for inflation/deflation has a larger diameter, which means the air comes out faster than in the version of the plug on the bow.
Additional valve . Car or bicycle type device. To deflate the mattress, you will need to press on the nipple, after which the air will begin to flow out freely.
Reference! Instead of holding the nipple, you can use a well-known life hack - a match to hold it.
With a bridge to prevent deflation. If your mattress has an anti-deflation valve, the open inflation hole will need to be slightly compressed. Thanks to this, the “protective” valve jumper will bend and the air will begin to escape faster. When most of the air has escaped, the mattress can be rolled up.
Electric pump . Well-known manufacturers (INTEX, Nordway, Comfort Quest) equip mattresses with pumps that have an “Air Release” function. Just press the appropriate button and the electrical appliance will do all the work for you!
Reference! Foot-operated mechanical versions from INTEX are equipped with a second air chamber to reduce deflation time. Manual options do not have this advantage.
Built-in valve . Manufacturers continue to improve valve design. So, more complex ones are available - built-in structures. To use these products effectively, it is important to strictly follow the manufacturer's instructions.
Reference! There are models with a removable valve. That is, in order to lower the product, you need to completely remove the mechanism.
How to deflate a mattress with a pump
There are models with a built-in pump. There are no additional valves or holes on them. Special markings or buttons provide different operating modes. The simplest pump options are started by switches with the number zero or minus. Most models with built-in pumps pump out air in a few minutes.
The second type of mattress is deflated with an external pump. The most convenient is an electric device. You need to act in this order:
· Attach a nozzle with a wide nozzle to the release valve.
· Open the valve slide. On models without a built-in device there are 2 valves - wide and narrow. To deflate, open wide.
· Turn on the pump. The device will begin to suck out air and the mattress will gradually deflate. Sometimes you have to hold the nozzle so it doesn't come off. The process will go faster if one person holds the pump and the other presses on the mattress.
The electric pump can be replaced with a mechanical foot device.
Manual devices are not suitable for mattresses. High power industrial pumps cannot be used either. It's easy to learn how to deflate air mattresses using a video with recommendations.
Proper deflation helps keep the valves intact. The mattress is easy to roll up and store without any remaining air. Careful use will preserve the item for many years.
An air mattress is a wonderful invention. It can be called a full-fledged economy class bed. It will fit into any apartment, even the smallest one. Deflating an air mattress is not difficult, but not everyone knows how to do it correctly. Meanwhile, the deflation technology of different models does not differ significantly.
Preparation for storage
Before deflating a mattress, it needs to be prepared for storage. To do this, use a simple soap solution. You cannot use “aggressive” household chemicals. This may damage the material. After cleaning, the product is left to dry until it dries itself. Only after complete drying is it deflated and stored deflated.
Read also: Refilling gas cylinders in Zelenogorsk
Drying should be natural, without the use of hair dryers and other heating devices.
How to deflate an air mattress with a pump?
Pumps for air beds are very convenient and practical devices that help in the process of their operation. When purchasing such frameless furniture, it is recommended to purchase a pump with two modes: for inflation and deflation. Typically, low-pressure pumps are used in such cases:
- mechanical (hand, foot) require additional force;
- electric ones allow you to deflate the mattress with one press of the “Blowing Air” button.
The main rule of inflation is to regulate elasticity; the air inside the product should be no more than ¾ of the total volume, otherwise the seams may tear and the mattress will burst. If it is over-inflated, you need to let some air out of it.
How to deflate a mattress using a foot pump? To do this, you will need to apply a little less force than when inflating. The pump should be connected to the product and pressed on the air chamber, which fills with air and then releases it out. A set of mechanical pumps is usually supplemented with small adapters, with the help of which air is pumped out of the product.
With the help of an electrical device, the descent occurs through a hose, which is inserted into a specially marked hole and connected to an electric pump. It has a “Blowing air” mode, after turning it on, the deflation process begins.
An air mattress was invented to bring more comfort to everyday life. This comfortable product is suitable for sleeping, swimming and other ways of relaxation. It is important to know the rules of operation and careful care of it.
An air mattress is a great help in a small city apartment and in the country. It is soft to sleep on and can be offered to an unexpected guest. When deflated, the portable bed takes up very little space. But the air does not come out as quickly as it is pumped in. How to deflate an air mattress quickly and correctly? A few simple tips will help.
Read also: How to replace mica for a soldering iron
September 15, 2016
How to blow it off?
Manufacturers of these products do not strive to unify their valves. Therefore, different models may deflate differently. There are several ways to do this without or with a pump.
Valve opening
For simple models with a simple device, you just need to open the valve. In this case, you will have to wait some time for all the air to escape. It is better not to put extra pressure on such a product to eliminate the risk of damage.
Opening the damper
Squeeze the valve on the sides or move the flap inside it if it is open and air does not come out. In this model, a special mechanism is built inside the main valve. It protects the mattress from deflation if the valve cap is accidentally opened. This is why the safety flap needs to be moved. Thus, you can easily blow away models from common companies, such as BESTWAY. More details are shown in the video.
Unscrewing the valve
You can unscrew the valve only after carefully inspecting it and being completely sure that it does not have separate parts for deflating air.
With pump
There are two types of air deflation pump. The first type is built into the product. It is electric and blows evenly and quickly. In this case, you just need to cover the air intake compartment with a lid.
The second type is a foot pump. It also allows you to deflate the air. You just need to press your foot on the air chamber.
You can easily see how one or the other type works on the Internet.
